This standard specifies the terms and definitions, requirements, sampling, test methods, inspection rules, marking and packing of cushions and pillows.
This standard is applicable to various cushions and pillows which take the textile fibres as the main raw materials.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest edition of the normative document is applicable to this standard.
GB/T 250 "Textiles-Tests for Colour Fastness-Grey Scale for Assessing Change in Colour" (GB/T 250-2008, ISO 105/A02:1993, IDT)
GB/T 2910 "Textile-Binary Fibre Mixtures-Quantitative Chemical Analysis" (GB/T 2910-1997, eqv ISO 1833: 1977)
GB/T 3920 "Textiles-Tests for Colour Fastness-Colour Fastness to Rubbing" (GB/T 3920-2008, ISO 105/X12:2001, MOD)
GB/T 3921 "Textiles-Tests for Colour Fastness-Colour Fastness to Soaping" (GB/T 3921-2008, ISO 105-C10:2006, MOD)
GB/T 3922 "Textiles-Testing Method for Colour Fastness to Perspiration" (GB/T 3922-1995, eqv ISO 105/E04:1994)
GB/T 3923.1 "Testiles-Tensile Properties of Fabrics-Part 1: Determination of Breaking Force and Elongation at Breaking Force-Strip Method"
GB/T 4802.2 "Textiles-Determination of Fabric Propensity to Surface Fuzzing and to Pilling-Part 2: Modified Martindale Method"
GB 5296.4 "Instructions for Use of Products of Consumer Interest-Instructions for Use of Textiles and Apparel"
GB/T 5711 "Textiles-Tests for Colour Fastness-Colour Fastness to Dry Cleaning" (GB/T 5711-1997, eqv ISO 105/D01:1993)
GB/T 8170 "Rules of Rounding off for Numerical Values & Expression and Judgement of Limiting Values"
GB/T 8427 "Textiles-Tests for Colour Fastness-Colour Fastness to Artificial Light: Xenon Arc Fading Lamp Test" (GB/T 8427-2008, ISO 105-B02:1994, MOD)
GB/T 8628 "Textiles-Preparation, Marking and Measuring of Fabric Specimens and Garments in Tests for Determination of Dimensional Change" (GB/T 8628 2001, eqv ISO 3759:1994)
GB/T 8629 "Textiles-Domestic Washing and Drying Procedures for Textile Testing" (GB/T 8629-2001, eqv ISO 6330:2000)
GB/T 8630 "Textiles-Determination of Dimensional Change in Washing and Drying" (GB/T 8630-2002, ISO 5077:1984, MOD)
GB/T 14801 "Test Method for Skewness and Bow in Woven and Knitted Fabrics"
GB 18383 "General Technical Requirements for Products with Filling Materials"
GB 18401 "National General Safety Technical Code for Textile Products"
FZ/T 01053 "Textiles-Identification of Fiber Content"
FZ/T 80007.3 "Dry Wash Resistance Test Method for Garments Used Adhesive Interlining"
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions apply.
3.1
Pillow
Textile which is sewed and filled with filling (such as textile fibre or foam material) and used for pillowing head, and may be divided into directly-used pillow and covered pillow.
3.2
Cushion
Textile which is sewed and filled with filling (such as textile fibre or foam material) and used for supporting or buffering, such as back cushion, seat cushion and mattress, and may be divided into directly-used cushion and covered cushion.
3.3
Filling
Material which has a certain elasticity and is filled between two layers of textiles for supporting.
3.4
Pillowslip
Protective coat that the pillow and cushion may be removed, which may be subjected to dry cleaning or water washing.
4 Requirements
4.1 The product is divided into high-class product, first-class product and qualified product.
4.2 The product quality is divided into inherent quality, appearance quality, process quality, etc.
4.3 The inherent quality of the product covers fibre content deviation, shell fabric breaking force, water-washing dimensional change ratio, dry-cleaning dimensional change ratio, shell fabric pilling property and colour fastness, and the inherent quality requirements are detailed in Table 1.
Foreword I 1 Scope 2 Normative References 3 Terms and Definitions 4 Requirements 5 Sampling 6 Test Methods 7 Inspection Rules 8 Marking and Packing Appendix A (Informative) Appearance Defects and Degree Description Appendix B (Normative) Sampling Method for Filling Fibre Content
1 Scope
This standard specifies the terms and definitions, requirements, sampling, test methods, inspection rules, marking and packing of cushions and pillows.
This standard is applicable to various cushions and pillows which take the textile fibres as the main raw materials.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest edition of the normative document is applicable to this standard.
GB/T 250 "Textiles-Tests for Colour Fastness-Grey Scale for Assessing Change in Colour" (GB/T 250-2008, ISO 105/A02:1993, IDT)
GB/T 2910 "Textile-Binary Fibre Mixtures-Quantitative Chemical Analysis" (GB/T 2910-1997, eqv ISO 1833: 1977)
GB/T 2911 "Textiles-Ternary Fibre Mixtures-Quantitative Analysis" (GB/T 2911-1997, eqv ISO 5088:1976)
GB/T 3920 "Textiles-Tests for Colour Fastness-Colour Fastness to Rubbing" (GB/T 3920-2008, ISO 105/X12:2001, MOD)
GB/T 3921 "Textiles-Tests for Colour Fastness-Colour Fastness to Soaping" (GB/T 3921-2008, ISO 105-C10:2006, MOD)
GB/T 3922 "Textiles-Testing Method for Colour Fastness to Perspiration" (GB/T 3922-1995, eqv ISO 105/E04:1994)
GB/T 3923.1 "Testiles-Tensile Properties of Fabrics-Part 1: Determination of Breaking Force and Elongation at Breaking Force-Strip Method"
GB/T 4802.2 "Textiles-Determination of Fabric Propensity to Surface Fuzzing and to Pilling-Part 2: Modified Martindale Method"
GB 5296.4 "Instructions for Use of Products of Consumer Interest-Instructions for Use of Textiles and Apparel"
GB/T 5711 "Textiles-Tests for Colour Fastness-Colour Fastness to Dry Cleaning" (GB/T 5711-1997, eqv ISO 105/D01:1993)
GB/T 8170 "Rules of Rounding off for Numerical Values & Expression and Judgement of Limiting Values"
GB/T 8427 "Textiles-Tests for Colour Fastness-Colour Fastness to Artificial Light: Xenon Arc Fading Lamp Test" (GB/T 8427-2008, ISO 105-B02:1994, MOD)
GB/T 8628 "Textiles-Preparation, Marking and Measuring of Fabric Specimens and Garments in Tests for Determination of Dimensional Change" (GB/T 8628 2001, eqv ISO 3759:1994)
GB/T 8629 "Textiles-Domestic Washing and Drying Procedures for Textile Testing" (GB/T 8629-2001, eqv ISO 6330:2000)
GB/T 8630 "Textiles-Determination of Dimensional Change in Washing and Drying" (GB/T 8630-2002, ISO 5077:1984, MOD)
GB/T 14801 "Test Method for Skewness and Bow in Woven and Knitted Fabrics"
GB 18383 "General Technical Requirements for Products with Filling Materials"
GB 18401 "National General Safety Technical Code for Textile Products"
FZ/T 01053 "Textiles-Identification of Fiber Content"
FZ/T 80007.3 "Dry Wash Resistance Test Method for Garments Used Adhesive Interlining"
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions apply.
3.1
Pillow
Textile which is sewed and filled with filling (such as textile fibre or foam material) and used for pillowing head, and may be divided into directly-used pillow and covered pillow.
3.2
Cushion
Textile which is sewed and filled with filling (such as textile fibre or foam material) and used for supporting or buffering, such as back cushion, seat cushion and mattress, and may be divided into directly-used cushion and covered cushion.
3.3
Filling
Material which has a certain elasticity and is filled between two layers of textiles for supporting.
3.4
Pillowslip
Protective coat that the pillow and cushion may be removed, which may be subjected to dry cleaning or water washing.
4 Requirements
4.1 The product is divided into high-class product, first-class product and qualified product.
4.2 The product quality is divided into inherent quality, appearance quality, process quality, etc.
4.3 The inherent quality of the product covers fibre content deviation, shell fabric breaking force, water-washing dimensional change ratio, dry-cleaning dimensional change ratio, shell fabric pilling property and colour fastness, and the inherent quality requirements are detailed in Table 1.
Contents of GB/T 22843-2009
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Requirements
5 Sampling
6 Test Methods
7 Inspection Rules
8 Marking and Packing
Appendix A (Informative) Appearance Defects and Degree Description
Appendix B (Normative) Sampling Method for Filling Fibre Content
