1 Scope
This standard specifies alterative fire heating curves and other procedures that may need to be adopted under special fire circumstances of the elements of building construction. The alternative fire heating curves include hydrocarbon (HC), external fire exposure, slow heating, electric fire and tunnel fire RABT-ZTV heating curves; the additional test procedures include (weight and spray water) impact test and measurement of radiation.
This standard is applicable to the elements or accessories of building construction which need to be subject to fire resistance test under special fire heating curve conditions and/or to be subject to other additional tests during fire resistance test.
Unless one of the alternative fire heating curves is specifically required, the standard temperature-time curve given in GB/T 9978.1 shall be used. Similarly, the (weight and spray water) impact test and measurement of radiation shall only be undertaken when they are specifically requested.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated reference, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 5907 Fundamental Terminology of Fire Protection - Part 1
GB 6246 Lined Fire Hose - Performance Requirements and Test Methods
GB 8181 Fire Nozzles
GB/T 9978.1 Fire-resistance Tests - Elements of Building Construction - Part 1: General Requirements (GB/T 9978.1-2008, ISO 834-1:1999, MOD)
GB/T 9978.4 Fire-resistance Tests - Elements of Building Construction - Part 4: Specific Requirements for Loadbearing Vertical Separating Elements (GB/T 9978.4-2008, ISO 834-4:2000, MOD)
GB/T 9978.8 Fire-resistance Tests - Elements of Building Construction - Part 8: Specific Requirements for Non-loadbearing Vertical Separating Elements (GB/T 9978.8-2008, ISO 834-8:2002, MOD)
GB 12514.1 Fire Coupling - Part 1: General Technical Conditions for Fire Coupling
GB 12514.2 Fire Coupling - Part 2: Patterns and Basic Parameters for Fire Snap-types Coupling
3 Terms and Definitions
For the purposes of this document, the terms and definitions given in GB/T 5907 and GB/T 9978.1 and the following apply.
Foreword II
1 Scope
2 Normative References
3 Terms and Definitions
4 Alternative Heating Curves
5 Additional Test Procedures
Annex A (Informative) Comparison of Chapter and Article Numbers in this Standard and those in EN 1363-2:
Annex B (Informative) Technical Differences between this Standard and EN 1363-2:1999 and their Reasons
Annex C (Informative) Guide for Possible Application Scenarios of Different Fire Heating Curves
Annex D (Informative) Application Guide for Spray Water Impact Test
1 Scope
This standard specifies alterative fire heating curves and other procedures that may need to be adopted under special fire circumstances of the elements of building construction. The alternative fire heating curves include hydrocarbon (HC), external fire exposure, slow heating, electric fire and tunnel fire RABT-ZTV heating curves; the additional test procedures include (weight and spray water) impact test and measurement of radiation.
This standard is applicable to the elements or accessories of building construction which need to be subject to fire resistance test under special fire heating curve conditions and/or to be subject to other additional tests during fire resistance test.
Unless one of the alternative fire heating curves is specifically required, the standard temperature-time curve given in GB/T 9978.1 shall be used. Similarly, the (weight and spray water) impact test and measurement of radiation shall only be undertaken when they are specifically requested.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated reference, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 5907 Fundamental Terminology of Fire Protection - Part 1
GB 6246 Lined Fire Hose - Performance Requirements and Test Methods
GB 8181 Fire Nozzles
GB/T 9978.1 Fire-resistance Tests - Elements of Building Construction - Part 1: General Requirements (GB/T 9978.1-2008, ISO 834-1:1999, MOD)
GB/T 9978.4 Fire-resistance Tests - Elements of Building Construction - Part 4: Specific Requirements for Loadbearing Vertical Separating Elements (GB/T 9978.4-2008, ISO 834-4:2000, MOD)
GB/T 9978.8 Fire-resistance Tests - Elements of Building Construction - Part 8: Specific Requirements for Non-loadbearing Vertical Separating Elements (GB/T 9978.8-2008, ISO 834-8:2002, MOD)
GB 12514.1 Fire Coupling - Part 1: General Technical Conditions for Fire Coupling
GB 12514.2 Fire Coupling - Part 2: Patterns and Basic Parameters for Fire Snap-types Coupling
3 Terms and Definitions
For the purposes of this document, the terms and definitions given in GB/T 5907 and GB/T 9978.1 and the following apply.
Contents of GB/T 26784-2011
Foreword II
1 Scope
2 Normative References
3 Terms and Definitions
4 Alternative Heating Curves
5 Additional Test Procedures
Annex A (Informative) Comparison of Chapter and Article Numbers in this Standard and those in EN 1363-2:
Annex B (Informative) Technical Differences between this Standard and EN 1363-2:1999 and their Reasons
Annex C (Informative) Guide for Possible Application Scenarios of Different Fire Heating Curves
Annex D (Informative) Application Guide for Spray Water Impact Test
