GB/T 328.14-2007 Test methods for building sheets for waterproofing—Part 14:Bitumen sheets for waterproofing-flexibility at low temperature (English Version)
1 Scope
This Part of GB/T 328 specifies the test methods for strengthening the flexibility at low temperature of the waterproof sheet for the bitumen roofing; the unreinforced bitumen sheets for waterproofing may also refer to this Part.
In this Part, both the upper surface and lower surface of the sheet shall pass through the test at specified temperature or continue to be determined within the scope of different temperatures, as the cold bending temperature of polarity temperature. This Part may be also used to determine the minimum cold bending temperature of the product or determine the cold bending temperature specified for the product, such as determining the performance change of the product after the accelerated aging.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this Part in GB/T 328. For dated reference, subsequent amendments to (excluding corrigenda), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest edition of the normative document applies.
GB/T 328.1 Test Methods for Building Sheets for Waterproofing - Part 1: Bitumen Plastic and Rubber Sheets for Waterproofing - Rules for Sampling
GB/T 6379.2 Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 2: Basic Method for the Determination of Repeatability and Reproducibility of a Standard Measurement Method (ISO 5725-2: 1994, IDT)
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Principles
5 Instruments and Equipment
6 Sampling
7 Specimen Preparation
8 Procedures
9 Accuracy of Result Record, Calculation, and Test Method
10 Test Report
GB/T 328.14-2007 Test methods for building sheets for waterproofing—Part 14:Bitumen sheets for waterproofing-flexibility at low temperature (English Version)
Standard No.
GB/T 328.14-2007
Status
valid
Language
English
File Format
PDF
Word Count
3000 words
Price(USD)
60.0
Implemented on
2007-10-1
Delivery
via email in 1 business day
Detail of GB/T 328.14-2007
Standard No.
GB/T 328.14-2007
English Name
Test methods for building sheets for waterproofing—Part 14:Bitumen sheets for waterproofing-flexibility at low temperature
1 Scope
This Part of GB/T 328 specifies the test methods for strengthening the flexibility at low temperature of the waterproof sheet for the bitumen roofing; the unreinforced bitumen sheets for waterproofing may also refer to this Part.
In this Part, both the upper surface and lower surface of the sheet shall pass through the test at specified temperature or continue to be determined within the scope of different temperatures, as the cold bending temperature of polarity temperature. This Part may be also used to determine the minimum cold bending temperature of the product or determine the cold bending temperature specified for the product, such as determining the performance change of the product after the accelerated aging.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this Part in GB/T 328. For dated reference, subsequent amendments to (excluding corrigenda), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest edition of the normative document applies.
GB/T 328.1 Test Methods for Building Sheets for Waterproofing - Part 1: Bitumen Plastic and Rubber Sheets for Waterproofing - Rules for Sampling
GB/T 6379.2 Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 2: Basic Method for the Determination of Repeatability and Reproducibility of a Standard Measurement Method (ISO 5725-2: 1994, IDT)
Contents of GB/T 328.14-2007
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Principles
5 Instruments and Equipment
6 Sampling
7 Specimen Preparation
8 Procedures
9 Accuracy of Result Record, Calculation, and Test Method
10 Test Report