GB/T 36883-2026 Technical requirements for liquefied natural gas (LNG) vehicles English
1 Scope
This standard specifies the technical requirements, inspection rules, sign, transport, storage and factory documents of liquefied natural gas vehicles.
This standard is applicable to M2, M3, N2, and N3 vehicles which can use liquefied natural gas fuel (hereinafter referred to as "LNG"), and may be used as reference for other types of vehicles.
2 Normative references
The contents in the following documents constitute essential provisions of this document through normative references in the text. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 3836.1 Explosive atmospheres — Part 1: Equipment - General requirements
GB 7258 Safety specifications for power-driven vehicles operating on roads
GB/T 17676 Gaseous fuel vehicle — Identification marks
GB/T 17895 Gaseous fuel vehicle — Terminology
GB 18384 Electric vehicles safety requirements
GB 19239 Installation specification for gas system of gas vehicles
GB 30038 Road vehicles — Degrees of electrical equipment protection (IP code)
GB 34660 Road vehicles — Requirements and test methods of electromagnetic compatibility
GB/T 36123 Technical requirements for gas leakage alarm device of gas vehicle
GB 38031 Electric vehicles traction battery safety requirements
GB/T 40494 Instructions for the use of power-driven vehicles
GB/T 44851.2 Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 2: Performance and general test methods
GB/T 44851.17 Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 17: Natural gas detector
JT/T 230 Rubber belt of electrostatic conductivity for motor vehicle
QC/T 471 Automotive diesel engine
QC/T 691 Technical specification of single-fuel natural gas vehicle engine
QC/T 755 Technical requirements of fuel-gas system for LNG vehicles
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 17895, GB/T 36123 and QC/T 755 apply.
4 Technical requirements
4.1 General requirements
4.1.1 LNG vehicle shall be manufactured according to the drawings and technical documents approved through the established procedures.
4.1.2 The safety devices of LNG vehicle shall meet the requirements of GB/T 7258.
4.1.3 For vehicles transporting LNG, the LNG being transported shall not be connected to the LNG vehicle gas system.
4.1.4 LNG vehicles shall be equipped with gas leakage detectors and alarm devices conforming to the provisions of GB/T 44851.17 and GB/T 36123.
4.1.5 LNG vehicles shall be equipped with rubber belt of electrostatic conductivity conforming to the provisions in JT/T 230.
4.1.6 LNG vehicles shall be equipped with ABC dry powder fire extinguishers in the driver's cab.
4.1.7 Components installed on LNG vehicles shall not affect refuelling operations and valve operations.
4.1.8 Spark-ignition engines shall conform to the provisions in QC/T 691, and compression-ignition engines shall conform to the provisions in QC/T 471.
4.1.9 Engine lubricating oil for LNG vehicles shall be filled in accordance with the engine manufacturer's requirements.
4.1.10 Exhaust system components shall be made of high-temperature-resistant and corrosion-resistant materials selected according to engine exhaust temperature and exhaust composition.
4.1.11 Wiring harnesses shall be securely fixed, and the routing position should take into account the influence of low-temperature gas pipelines on their performance. Wiring harness connectors shall be properly insulated and shall maintain a safe distance from gas pipeline connectors or be provided with isolation measures.
4.1.12 LNG vehicle instruments shall display the residual amount of fuel in each cylinder and the fuel consumption per 100 km. The unit of residual amount of fuel shall be litre (L) or kilogram (kg), and the unit of natural gas fuel consumption per 100 km shall be L/100 km or kg/100 km. Bi-fuel vehicles and dual-fuel vehicles shall separately display the residual amount of the two fuels.
4.1.13 LNG vehicles shall release a warning signal through the instrument or human-machine interface when the cylinder liquid level is low and when the driving range is less than 100 km. The warning signal may be provided in various forms such as audible and visual prompts and text display to alert the driver.
4.1.14 The gas of LNG vehicles may be used as fuel for vehicle heating devices, except for vehicles for the transport of dangerous goods. When the heating device is working, it shall not affect the normal operation of the engine. When a gas-fuelled air-heating type heater is used to heat the driver's cab or passenger space, a gas leakage detector shall be installed in that space.
4.1.15 Requirements for bi-fuel vehicles are as follows:
a) A fuel changeover switch shall be installed. The installation position of the fuel changeover switch shall be convenient for the driver to operate, and its position markings shall be obvious;
b) If fuel changeover can be achieved during driving, the fuel supply during changeover shall be continuous and stable, without affecting the normal engine operation and driving safety;
c) If fuel changeover cannot be achieved during driving, operating instructions or warnings shall be provided near the fuel changeover switch to inform the driver of the conditions of use of the fuel changeover switch;
d) If diesel (or gasoline)/natural gas bi-fuel is used, measures shall be provided to prevent natural gas from flowing into the diesel tank (or gasoline tank) and to prevent diesel (or gasoline) from flowing into the natural gas storage tank.
4.1.16 The safety requirements for the electric drive part of natural gas hybrid electric vehicles shall conform to the provisions in GB 18384, and the traction battery shall conform to the provisions in GB 38031.
4.2 LNG vehicle gas system
The LNG vehicle gas system shall conform to the provisions in GB/T 44851.2 and QC/T 755, and shall also meet the following requirements:
a) The pressure and temperature of the output gas shall meet the use requirements of the engine.
b) In any of the following cases, the LNG vehicle gas system shall be capable of automatically cutting off the supply of LNG to the engine:
1) The ignition switch is off;
2) The engine stops running, except for the automatic start-stop function;
3) The LNG supply pipeline is broken, detached, etc.
c) The electromagnetic compatibility of electrical components in the LNG vehicle gas system conforms to the provisions in GB 34660, the explosion-proof performance conforms to the provisions in GB/T 3836.1, and the overvoltage capability conforms to the provisions in GB/T 44851.2.
Contents
Foreword I
1 Scope
2 Normative references
3 Terms and definitions
4 Technical requirements
5 Inspection rules
6 Sign, transport and storage
7 Factory documents
Bibliography
GB/T 36883-2026 Technical requirements for liquefied natural gas (LNG) vehicles English
1 Scope
This standard specifies the technical requirements, inspection rules, sign, transport, storage and factory documents of liquefied natural gas vehicles.
This standard is applicable to M2, M3, N2, and N3 vehicles which can use liquefied natural gas fuel (hereinafter referred to as "LNG"), and may be used as reference for other types of vehicles.
2 Normative references
The contents in the following documents constitute essential provisions of this document through normative references in the text. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 3836.1 Explosive atmospheres — Part 1: Equipment - General requirements
GB 7258 Safety specifications for power-driven vehicles operating on roads
GB/T 17676 Gaseous fuel vehicle — Identification marks
GB/T 17895 Gaseous fuel vehicle — Terminology
GB 18384 Electric vehicles safety requirements
GB 19239 Installation specification for gas system of gas vehicles
GB 30038 Road vehicles — Degrees of electrical equipment protection (IP code)
GB 34660 Road vehicles — Requirements and test methods of electromagnetic compatibility
GB/T 36123 Technical requirements for gas leakage alarm device of gas vehicle
GB 38031 Electric vehicles traction battery safety requirements
GB/T 40494 Instructions for the use of power-driven vehicles
GB/T 44851.2 Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 2: Performance and general test methods
GB/T 44851.17 Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 17: Natural gas detector
JT/T 230 Rubber belt of electrostatic conductivity for motor vehicle
QC/T 471 Automotive diesel engine
QC/T 691 Technical specification of single-fuel natural gas vehicle engine
QC/T 755 Technical requirements of fuel-gas system for LNG vehicles
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 17895, GB/T 36123 and QC/T 755 apply.
4 Technical requirements
4.1 General requirements
4.1.1 LNG vehicle shall be manufactured according to the drawings and technical documents approved through the established procedures.
4.1.2 The safety devices of LNG vehicle shall meet the requirements of GB/T 7258.
4.1.3 For vehicles transporting LNG, the LNG being transported shall not be connected to the LNG vehicle gas system.
4.1.4 LNG vehicles shall be equipped with gas leakage detectors and alarm devices conforming to the provisions of GB/T 44851.17 and GB/T 36123.
4.1.5 LNG vehicles shall be equipped with rubber belt of electrostatic conductivity conforming to the provisions in JT/T 230.
4.1.6 LNG vehicles shall be equipped with ABC dry powder fire extinguishers in the driver's cab.
4.1.7 Components installed on LNG vehicles shall not affect refuelling operations and valve operations.
4.1.8 Spark-ignition engines shall conform to the provisions in QC/T 691, and compression-ignition engines shall conform to the provisions in QC/T 471.
4.1.9 Engine lubricating oil for LNG vehicles shall be filled in accordance with the engine manufacturer's requirements.
4.1.10 Exhaust system components shall be made of high-temperature-resistant and corrosion-resistant materials selected according to engine exhaust temperature and exhaust composition.
4.1.11 Wiring harnesses shall be securely fixed, and the routing position should take into account the influence of low-temperature gas pipelines on their performance. Wiring harness connectors shall be properly insulated and shall maintain a safe distance from gas pipeline connectors or be provided with isolation measures.
4.1.12 LNG vehicle instruments shall display the residual amount of fuel in each cylinder and the fuel consumption per 100 km. The unit of residual amount of fuel shall be litre (L) or kilogram (kg), and the unit of natural gas fuel consumption per 100 km shall be L/100 km or kg/100 km. Bi-fuel vehicles and dual-fuel vehicles shall separately display the residual amount of the two fuels.
4.1.13 LNG vehicles shall release a warning signal through the instrument or human-machine interface when the cylinder liquid level is low and when the driving range is less than 100 km. The warning signal may be provided in various forms such as audible and visual prompts and text display to alert the driver.
4.1.14 The gas of LNG vehicles may be used as fuel for vehicle heating devices, except for vehicles for the transport of dangerous goods. When the heating device is working, it shall not affect the normal operation of the engine. When a gas-fuelled air-heating type heater is used to heat the driver's cab or passenger space, a gas leakage detector shall be installed in that space.
4.1.15 Requirements for bi-fuel vehicles are as follows:
a) A fuel changeover switch shall be installed. The installation position of the fuel changeover switch shall be convenient for the driver to operate, and its position markings shall be obvious;
b) If fuel changeover can be achieved during driving, the fuel supply during changeover shall be continuous and stable, without affecting the normal engine operation and driving safety;
c) If fuel changeover cannot be achieved during driving, operating instructions or warnings shall be provided near the fuel changeover switch to inform the driver of the conditions of use of the fuel changeover switch;
d) If diesel (or gasoline)/natural gas bi-fuel is used, measures shall be provided to prevent natural gas from flowing into the diesel tank (or gasoline tank) and to prevent diesel (or gasoline) from flowing into the natural gas storage tank.
4.1.16 The safety requirements for the electric drive part of natural gas hybrid electric vehicles shall conform to the provisions in GB 18384, and the traction battery shall conform to the provisions in GB 38031.
4.2 LNG vehicle gas system
The LNG vehicle gas system shall conform to the provisions in GB/T 44851.2 and QC/T 755, and shall also meet the following requirements:
a) The pressure and temperature of the output gas shall meet the use requirements of the engine.
b) In any of the following cases, the LNG vehicle gas system shall be capable of automatically cutting off the supply of LNG to the engine:
1) The ignition switch is off;
2) The engine stops running, except for the automatic start-stop function;
3) The LNG supply pipeline is broken, detached, etc.
c) The electromagnetic compatibility of electrical components in the LNG vehicle gas system conforms to the provisions in GB 34660, the explosion-proof performance conforms to the provisions in GB/T 3836.1, and the overvoltage capability conforms to the provisions in GB/T 44851.2.
Contents of GB/T 36883-2026
Contents
Foreword I
1 Scope
2 Normative references
3 Terms and definitions
4 Technical requirements
5 Inspection rules
6 Sign, transport and storage
7 Factory documents
Bibliography