1 Scope
This standard specifies terms and definitions, classification, requirements, measurement and test methods, inspection rules, as well as marking, packaging, transportation and storage of particleboard.
This standard is applicable to general purpose particleboard, furniture grade particleboard, load bearing particleboard, heavy-duty load bearing particleboard, etc.
This standard is not applicable to oriented strand board (OSB)
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2828.1-2012 Sampling Procedures for Inspection by Attributes — Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection (ISO 2859-1:1999, IDT)
GB/T 17657-2013 Test Methods of Evaluating the Properties of Wood-based Panels and Surface Decorated Wood-based Panels
GB/T 18259-2009 Terms of Wood-based Panel and Its Surface Decoration
GB 18580 Indoor Decorating and Refurbishing Materials — Limit of Formaldehyde Emission of Wood-based Panels and Finishing Products
GB/T 19367-2009 Wood-based Panels — Determination of Dimensions of Panels
LY/T 1717-2007 Guide for Sampling Inspection of Wood-based Panels
Foreword II
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification
5 Specification Limit
6 Requirements
6.1 Specification and Deviation
6.2 Appearance Quality
6.3 Physical and Chemical Properties
7 Measurement and Test Methods
7.1 Specification and Size Measurement
7.2 Specimen Sampling and Size Requirements
7.3 Test Methods
8 Inspection Rules
8.1 Inspection Types
8.2 Sampling and Judgment Rules
8.3 Measurement of Products
9 Marking, packaging, Transportation and Storage
9.1 Marking
9.2 Packaging
9.3 Transportation and Storage
Annex A (Normative) Calculation of 5-percentile and 95-percentile Values
1 Scope
This standard specifies terms and definitions, classification, requirements, measurement and test methods, inspection rules, as well as marking, packaging, transportation and storage of particleboard.
This standard is applicable to general purpose particleboard, furniture grade particleboard, load bearing particleboard, heavy-duty load bearing particleboard, etc.
This standard is not applicable to oriented strand board (OSB)
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2828.1-2012 Sampling Procedures for Inspection by Attributes — Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection (ISO 2859-1:1999, IDT)
GB/T 17657-2013 Test Methods of Evaluating the Properties of Wood-based Panels and Surface Decorated Wood-based Panels
GB/T 18259-2009 Terms of Wood-based Panel and Its Surface Decoration
GB 18580 Indoor Decorating and Refurbishing Materials — Limit of Formaldehyde Emission of Wood-based Panels and Finishing Products
GB/T 19367-2009 Wood-based Panels — Determination of Dimensions of Panels
LY/T 1717-2007 Guide for Sampling Inspection of Wood-based Panels
Contents of GB/T 4897-2015
Foreword II
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification
5 Specification Limit
6 Requirements
6.1 Specification and Deviation
6.2 Appearance Quality
6.3 Physical and Chemical Properties
7 Measurement and Test Methods
7.1 Specification and Size Measurement
7.2 Specimen Sampling and Size Requirements
7.3 Test Methods
8 Inspection Rules
8.1 Inspection Types
8.2 Sampling and Judgment Rules
8.3 Measurement of Products
9 Marking, packaging, Transportation and Storage
9.1 Marking
9.2 Packaging
9.3 Transportation and Storage
Annex A (Normative) Calculation of 5-percentile and 95-percentile Values