Detail of GB/T 39390-2023

Introduction of GB/T 39390-2023

Foreword Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative. This document is developed in accordance with the rules given in GB/T 101-2020 Directives for standardization - Part 1: Rules for the structure and drafting of standardizing documents. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The issuing body of this document shall not be held responsible for identifying any or all such patent rights. This document was proposed by the China National Light Industry Council. This standard is under the jurisdiction of the National Technical Committee on Furniture of Standardization Administration of China (SAC/TC 480). Custom furniture - Quality inspection and quality evaluation 1 Scope This document specifies the terms, definitions, requirements, inspection methods, inspection procedures, inspection rules and quality evaluation of custom furniture. This document is applicable to custom furniture products. 2 Normative references The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 1927.4 Test methods for physical and mechanical properties of small clear wood specimens - Part 4: Determination of moisture content GB/T 2912.1 Textiles - Determination of formaldehyde - Part 1: Free and hydrolyzed formaldehyde (water extraction method) GB/T 3324 General technical requirements for wooden furniture GB/T 3325 Metal furniture - General technical requirements GB/T 4897-2015 Particleboard GB/T 5849 Blockboards and battenboards GB 6675.4-2014 Safety of toys - Part 4: Migration of certain elements GB/T 9846 Plywood for general use GB/T 11718-2021 Medium density fibreboard GB/T 15102 Surface decorated fiberboard and particleboard with paper impregnated thermosetting resins GB/T 15104 Decorative veneered wood-based panel GB/T 16799 Furniture leather GB/T 17592 Textiles - Determination of the banned azo colourants GB/T 17657-2022 Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels GB 17927.1 Upholstered furniture - Assessment of the resistance to ignition of mattress and sofa - Part 1: Smouldering cigarette GB 17927.2 Upholstered furniture - Assessment of the resistance to ignition of mattress and sofa - Part 2: Match flame equivalent GB 18401-2010 National general safety technical code for textile products GB 18580 Indoor decorating and refurbishing materials - Limit of formaldehyde emission of wood-based panels and finishing products GB/T 19941 (All parts) Leather and fur - Determination of formaldehyde content GB/T 19942 Leather and fur - Chemical tests - Determination of banned azo colorants GB 20400-2006 Leather and fur - Limit of harmful matter GB/T 22048 Determination of certain phthalate esters in toys and children’s products GB/T 23344 Textiles - Determination of 4-aminoazobenzene GB/T 24430 Test method for bunk bed structure safety GB 24977 Bathroom furniture GB 28007-2011 General technical requirements for childrens furniture GB/T 28202 Furniture industry terminology GB/T 28203 Technical requirements and test methods of furniture connectors GB/T 32444 General technical requirements for bamboo furniture GB/T 32446 General technical requirements for glass furniture GB/T 32487 General technical requirements for plastic furniture GB/T 33282 General technical requirements for indoor stone furniture GB/T34722 Surface decorated plywood and blockboard with paper impregnated thermosetting resins GB/T 35607 Green product assessment - Furniture GB/T 39016-2012 Custom furniture - General design specification GB/T 39386 Custom furniture - Field test method of volatile organic compounds LY/T 1983 Surface decorated wood-based panels with aluminium foil and coppy foil QB/T 1242 Installation dimension for furniture hardware QB/T 1952.1-2012 Upholstered furniture - Sofa QB/T 1952.2-2011 Upholstered furniture - Spring mattress QB/T 2189 Hardware for furniture - Cup hinges QB/T 2280 Office furniture - Office chair QB/T 2454 Hardware for furniture - Guide rails QB/T 4463 Technical requirements of edge banding for furniture QB/T 4765 Castors for furniture QB/T 4767 Steel members for furniture 3 Terms and definitions For the purposes of this document, the terms and definitions given in GB/T 28202 and the following apply. 3.1 custom furniture furniture that is measured, designed, manufactured, installed and served according to the individual needs of customers Example: custom wardrobe, custom kitchen cabinets, custom bookcases, customized desks, custom sofas, custom mattresses, etc. 3.2 process quality control inspection of products during design, processing, and packaging 3.3 ex-factory inspection inspection of products and their components before delivery and transportation. 3.4 delivery inspection inspection of products after installation and assembly at the location specified by the customer during customization 3.5 agreed upon inspection inspection proposed by supplier and purchase for the items that have not been inspected at the time of product delivery within the warranty period stipulated by the state or agreed by the parties 4 Requirements 4.1 General requirements Except for the requirements agreed upon by supplier and purchaser, all other requirements shall comply with this document. 4.2 Appearance properties The appearance properties of products and their assemblies shall meet those specified in Table 1.

Contents of GB/T 39390-2023

Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Requirements 5 Inspection method 6 Inspection procedures 7 Inspection rules 8 Quality evaluation