Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
GB/T 5585 Copper or aluminium and its alloy bus bars for electrical purposes consists of two parts:
— Part 1: Copper and copper alloy bus bars;
— Part 2: Aluminium and aluminium alloy bus bars.
This is Part 2 of GB/T 5585.
This part is developed in accordance with the rules given in GB/T 1.1-2009.
This part replaces GB/T 5585.2-2005 Copper or aluminium and its alloy bus bars for electrical purposes — Part 2: Aluminium and aluminium alloy bus bars, and the following main technical changes have been made with respect to GB/T 5585.2-2005:
— updated some normative references (see Clause 2; Clause 2 of Edition 2005);
— specified the code and product representation method (see 4.1 and 4.2; 3.2 and 3.3 of Edition 2005);
— modified the chemical composition of aluminium and aluminium alloy bus bars (see 5.3; 4.3 of Edition 2005);
— added a note to "Table 2 Dimensions of aluminium and aluminium alloy bus bars” (see Table 2; Table 1 of Edition 2005);
— specified the expression of test classification (see 8.1; 7.1 of Edition 2005);
— modified the expression for marking (see 9.3, 8.3 of Edition 2005).
This part was proposed by the China Electrical Equipment Industrial Association.
This part is under the jurisdiction of National Technical Committee on Bare Wires of Standardization Administration of China (SAC/TC 422).
The previous edition of standard replaced by this part is as follows:
— GB 5585.1-1985;
— GB 5585.3-1985;
— GB/T 5585.2-2005.
Copper or aluminium and its alloy bus bars for electrical purposes — Part 2: Aluminium and aluminium alloy bus bars
1 Scope
This part of GB/T 5585 specifies the code, product representation method, technical requirements, test, delivery length and quality, acceptance rules, product certificate, packaging, marking, transportation and storage of the aluminium and its alloy bus bars for electrical purposes.
This part is applicable to the aluminium and its alloy bus bars for electrical purposes (also called aluminum and aluminum alloy row).
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated reference, only the edition cited applies. For undated references, the latest edition of the referenced documents (including any amendments) applies.
GB/T 321 Preferred numbers — Series of preferred numbers
GB/T 1196 Unalloyed aluminium ingots for remelting
GB/T 2900.10 Electrotechnical terminology — Electric cables
GB/T 3048.2 Test methods for electrical properties of electric cables and wires — Part 2: Test of electrical resistivity of metallic materials
GB/T 4909.2 Test methods for bare wires — Part 2: Measurement of dimensions
GB/T 4909.3 Test methods for bare wires — Part 3: Tensile test
GB/T 4909.6 Test methods for bare wires — Part 6: Bend test - Single bend test
GB/T 20975 (All parts) Methods for chemical analysis of aluminium and aluminium alloys
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 2900.10 and the following apply.
3.1
dimensions
dimensions of the bus, which is expressed by the nominal size a × b of the thickness and width of the bus bar section
3.2
straightness
maximum vertical distance of any point on a datum plane for which any plane of the bus is stationary on that
4 Code and product representation method
4.1 Code
Code classification of aluminium and aluminium alloy bus bars includes material type code and status code, as shown in Table 1.
Table 1 Code of aluminium and aluminium alloy bus bars
Code classification Code Name
Material type code LM Aluminium bus bars
LHM Aluminium alloy bus bars
Status code R Soft state
Y Hard state
4.2 Product representation method
4.2.1 The composition and arrangement order of product models are material type code and state code in turn.
4.2.2 The products shall be expressed by model, dimensions and standard number.
4.2.3 Examples of product representation are as follows:
Example: LMY 10 × 100 GB/T 5585.2-2018 represents that:
Aluminium bus bars, with 10.00 mm in thickness and 100.00 mm in width, hard state.
5 Technical Requirements
5.1 Cross-section shape of aluminium and aluminium alloy bus bars
See Figure 1 for the cross-section shape of aluminium and aluminium alloy bus bars.
In millimeters
Keys:
a — thickness, i.e. narrow edge dimension;
b — width, i.e. wide edge dimension;
r — fillet radius.
Figure 1 Cross-section shape of aluminium and aluminium alloy bus bars
5.2 Technical indexes of aluminium alloy bus bars
If there is no provision for the technical indexes of aluminium alloy bus bars, it shall be consistent with the provisions of aluminum bus bars.
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Code and product representation method
5 Technical Requirements
6 Tests
7 Delivery length and quality
8 Acceptance rules
9 Product certificate, packaging, marking, transportation and storage
Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
GB/T 5585 Copper or aluminium and its alloy bus bars for electrical purposes consists of two parts:
— Part 1: Copper and copper alloy bus bars;
— Part 2: Aluminium and aluminium alloy bus bars.
This is Part 2 of GB/T 5585.
This part is developed in accordance with the rules given in GB/T 1.1-2009.
This part replaces GB/T 5585.2-2005 Copper or aluminium and its alloy bus bars for electrical purposes — Part 2: Aluminium and aluminium alloy bus bars, and the following main technical changes have been made with respect to GB/T 5585.2-2005:
— updated some normative references (see Clause 2; Clause 2 of Edition 2005);
— specified the code and product representation method (see 4.1 and 4.2; 3.2 and 3.3 of Edition 2005);
— modified the chemical composition of aluminium and aluminium alloy bus bars (see 5.3; 4.3 of Edition 2005);
— added a note to "Table 2 Dimensions of aluminium and aluminium alloy bus bars” (see Table 2; Table 1 of Edition 2005);
— specified the expression of test classification (see 8.1; 7.1 of Edition 2005);
— modified the expression for marking (see 9.3, 8.3 of Edition 2005).
This part was proposed by the China Electrical Equipment Industrial Association.
This part is under the jurisdiction of National Technical Committee on Bare Wires of Standardization Administration of China (SAC/TC 422).
The previous edition of standard replaced by this part is as follows:
— GB 5585.1-1985;
— GB 5585.3-1985;
— GB/T 5585.2-2005.
Copper or aluminium and its alloy bus bars for electrical purposes — Part 2: Aluminium and aluminium alloy bus bars
1 Scope
This part of GB/T 5585 specifies the code, product representation method, technical requirements, test, delivery length and quality, acceptance rules, product certificate, packaging, marking, transportation and storage of the aluminium and its alloy bus bars for electrical purposes.
This part is applicable to the aluminium and its alloy bus bars for electrical purposes (also called aluminum and aluminum alloy row).
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated reference, only the edition cited applies. For undated references, the latest edition of the referenced documents (including any amendments) applies.
GB/T 321 Preferred numbers — Series of preferred numbers
GB/T 1196 Unalloyed aluminium ingots for remelting
GB/T 2900.10 Electrotechnical terminology — Electric cables
GB/T 3048.2 Test methods for electrical properties of electric cables and wires — Part 2: Test of electrical resistivity of metallic materials
GB/T 4909.2 Test methods for bare wires — Part 2: Measurement of dimensions
GB/T 4909.3 Test methods for bare wires — Part 3: Tensile test
GB/T 4909.6 Test methods for bare wires — Part 6: Bend test - Single bend test
GB/T 20975 (All parts) Methods for chemical analysis of aluminium and aluminium alloys
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 2900.10 and the following apply.
3.1
dimensions
dimensions of the bus, which is expressed by the nominal size a × b of the thickness and width of the bus bar section
3.2
straightness
maximum vertical distance of any point on a datum plane for which any plane of the bus is stationary on that
4 Code and product representation method
4.1 Code
Code classification of aluminium and aluminium alloy bus bars includes material type code and status code, as shown in Table 1.
Table 1 Code of aluminium and aluminium alloy bus bars
Code classification Code Name
Material type code LM Aluminium bus bars
LHM Aluminium alloy bus bars
Status code R Soft state
Y Hard state
4.2 Product representation method
4.2.1 The composition and arrangement order of product models are material type code and state code in turn.
4.2.2 The products shall be expressed by model, dimensions and standard number.
4.2.3 Examples of product representation are as follows:
Example: LMY 10 × 100 GB/T 5585.2-2018 represents that:
Aluminium bus bars, with 10.00 mm in thickness and 100.00 mm in width, hard state.
5 Technical Requirements
5.1 Cross-section shape of aluminium and aluminium alloy bus bars
See Figure 1 for the cross-section shape of aluminium and aluminium alloy bus bars.
In millimeters
Keys:
a — thickness, i.e. narrow edge dimension;
b — width, i.e. wide edge dimension;
r — fillet radius.
Figure 1 Cross-section shape of aluminium and aluminium alloy bus bars
5.2 Technical indexes of aluminium alloy bus bars
If there is no provision for the technical indexes of aluminium alloy bus bars, it shall be consistent with the provisions of aluminum bus bars.
Contents of GB/T 5585.2-2018
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Code and product representation method
5 Technical Requirements
6 Tests
7 Delivery length and quality
8 Acceptance rules
9 Product certificate, packaging, marking, transportation and storage