1 Scope
This standard specifies the classification and designation, appearance and color, requirements, test methods, inspection rules, as well as marking, packaging, transport and storage of plasticized polyvinyl chloride (PVC) compounds for wire and cable (hereinafter referred to as PVC cable materials).
This standard is applicable to plasticized polyvinyl chloride (PVC) compounds for wire and cable made from PVC resin with additives such as plasticizer and stabilizer through mixing, plasticizing and granulating.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 1033-1986 Test method for density and relative density of plastics
GB/T 1040.3-2006 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3: 1995, IDT)
GB/T 1408.1-2006 Insulating materials - Test methods for electric strength - Part 1: Tests at power frequencies (IEC 60243-1: 1998, IDT)
GB/T 1409-2006 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including meter wavelengths (IEC 60250: 1969, MOD)
GB/T 1410-2006 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials (IEC 60093: 1980, IDT)
GB/T 2406-1993 Plastics - Determination of Flammability by Oxygen Index
GB/T 2951.7-1997 Common test methods for insulating and sheathing materials of electric cables - Part 3: Methods specific to PVC compounds - Section 2: Loss mass test - Thermal stability test
GB/T 5470-1985 Test method for brittleness temperature of plastics by impact
3 Classification and designation
3.1 Classification
PVC cable materials may be divided into insulation grade and sheath grade according to application.
3.2 Designation
Foreword i
1 Scope
2 Normative references
3 Classification and designation
4 Appearance and color
5 Requirements
6 Test methods
7 Inspection rules
8 Marking, packaging, transport and storage
Bibliography
1 Scope
This standard specifies the classification and designation, appearance and color, requirements, test methods, inspection rules, as well as marking, packaging, transport and storage of plasticized polyvinyl chloride (PVC) compounds for wire and cable (hereinafter referred to as PVC cable materials).
This standard is applicable to plasticized polyvinyl chloride (PVC) compounds for wire and cable made from PVC resin with additives such as plasticizer and stabilizer through mixing, plasticizing and granulating.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 1033-1986 Test method for density and relative density of plastics
GB/T 1040.3-2006 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3: 1995, IDT)
GB/T 1408.1-2006 Insulating materials - Test methods for electric strength - Part 1: Tests at power frequencies (IEC 60243-1: 1998, IDT)
GB/T 1409-2006 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including meter wavelengths (IEC 60250: 1969, MOD)
GB/T 1410-2006 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials (IEC 60093: 1980, IDT)
GB/T 2406-1993 Plastics - Determination of Flammability by Oxygen Index
GB/T 2951.7-1997 Common test methods for insulating and sheathing materials of electric cables - Part 3: Methods specific to PVC compounds - Section 2: Loss mass test - Thermal stability test
GB/T 5470-1985 Test method for brittleness temperature of plastics by impact
3 Classification and designation
3.1 Classification
PVC cable materials may be divided into insulation grade and sheath grade according to application.
3.2 Designation
Contents of GB/T 8815-2008
Foreword i
1 Scope
2 Normative references
3 Classification and designation
4 Appearance and color
5 Requirements
6 Test methods
7 Inspection rules
8 Marking, packaging, transport and storage
Bibliography
