Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This document is developed in accordance with the rules given in GB/T 1.1-2020 Directives for standardization — Part 1: Rules for the structure and drafting of standardizing documents.
This document replaces GB 24427-2009 Limitation of mercury, cadmium and lead contents for alkaline and non-alkaline zinc manganese dioxide batteries and GB 24428-2009 Limitation of mercury content for zinc silver oxide, zinc oxygen and zinc manganese dioxide button batteries. In addition to structural adjustments and editorial changes, the following main technical changes have been made with respect to GB 24427-2009 and GB 24428-2009.
— The definitions of cadmium-free battery and lead-free battery have been added (see 3.6 and 3.7 hereof);
— Mercury-containing battery (mercury-low battery) has been deleted (see Table 1 of GB 24427-2009 and Table 2 of GB 24428-2009);
— The mercury limit of other zinc anode primary batteries except button battery (≤ 5 μg/g) has been modified and set to ≤ 1 μg/g (see Table 1 hereof, Table 1 of GB 24427-2009 and Table 2 of GB 24428-2009);
— The cadmium and lead contents of alkaline and alkaline zinc manganese dioxide battery have been modified (see Table 1 hereof, Table 1 of GB 24427-2009);
— The cadmium and lead contents of non-alkaline zinc manganese dioxide battery have been modified (see Table 1 hereof, Table 1 of GB 24427-2009);
— The cadmium and lead contents of zinc-air and zinc-silver oxide button batteries have been increased (see Table 1 hereof).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The issuing body of this document shall not be held responsible for identifying any or all such patent rights.
This document was proposed by and is under the jurisdiction of the Ministry of Industry and Information Technology of the People's Republic of China.
The previous editions of this document and documents replaced by this document are as follows:
— GB 24427-2009;
— GB 24428-2009;
— This edition is the first revision.
Content limitation of mercury, cadmium and lead for zinc anode primary battery
1 Scope
This document specifies the limitation requirements, inspection methods and conformity requirements of mercury, cadmium and lead contents of standardized zinc manganese dioxide battery, zinc-silver oxide battery and zinc-air battery.
This document is applicable to the production, inspection and acceptance of standardized zinc manganese dioxide battery, zinc-silver oxide battery and zinc-air battery and battery composed by several primary cells.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 8897.1 Primary batteries — Part 1: General
GB/T 8897.2 Primary batteries — Part 2: Physical and electrical specifications
GB/T 8897.3 Primary batteries — Part 3: Watch batteries
GB/T 20155 Determination of mercury, cadmium and lead in battery
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
primary cell
basic functional unit of power supply, which is designed as non-chargeable and can directly convert chemical energy into electrical energy
Note to entry: It consists of electrodes, electrolyte, a container, terminals and usually an isolation layer.
3.2
primary battery
battery consisting of one or multiple primary batteries and equipped with necessary devices for use (e.g., shell, terminals, marks and protective devices)
3.3
button battery
cylindrical batteries with total height less than diameter, shaped like buttons or coins
3.4
small button battery
button batteries with mass less than 1 g
3.5
mercury-free battery
button batteries with mercury content not greater than 5 μg/g, and other batteries with mercury content not greater than 1 μg/g
3.6
cadmium-free battery
batteries with cadmium content not greater than 20 μg/g
3.7
lead-free battery
batteries with lead content not greater than 40 μg/g
3.8
zinc anode primary battery
primary batteries with zinc as anode include but are not limited to zinc manganese dioxide batteries, zinc-silver oxide batteries and zinc-air batteries
The standardized alkaline zinc manganese dioxide button batteries specified in GB/T 8897.2 include LR9, LR41, LR55, LR54, LR43 and LR44 batteries.
5 Content limitation of mercury, cadmium and lead for zinc anode primary battery
See Table 1 for the content limitation of mercury, cadmium and lead for zinc anode primary batteries.
Other zinc-silver oxide, zinc-air and zinc manganese dioxide button batteries that have not been standardized shall comply with the requirements of Table 1.
Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Standardized zinc-silver oxide, zinc-air and zinc manganese dioxide button batteries 5 Content limitation of mercury, cadmium and lead for zinc anode primary battery 6 Test method of mercury, cadmium and lead contents for batteries 7 Compliance judgment of mercury, cadmium and lead contents in batteries 8 Marking Annex A (Informative) Size codes comparison table of button batteries named differently by new and old models
Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This document is developed in accordance with the rules given in GB/T 1.1-2020 Directives for standardization — Part 1: Rules for the structure and drafting of standardizing documents.
This document replaces GB 24427-2009 Limitation of mercury, cadmium and lead contents for alkaline and non-alkaline zinc manganese dioxide batteries and GB 24428-2009 Limitation of mercury content for zinc silver oxide, zinc oxygen and zinc manganese dioxide button batteries. In addition to structural adjustments and editorial changes, the following main technical changes have been made with respect to GB 24427-2009 and GB 24428-2009.
— The definitions of cadmium-free battery and lead-free battery have been added (see 3.6 and 3.7 hereof);
— Mercury-containing battery (mercury-low battery) has been deleted (see Table 1 of GB 24427-2009 and Table 2 of GB 24428-2009);
— The mercury limit of other zinc anode primary batteries except button battery (≤ 5 μg/g) has been modified and set to ≤ 1 μg/g (see Table 1 hereof, Table 1 of GB 24427-2009 and Table 2 of GB 24428-2009);
— The cadmium and lead contents of alkaline and alkaline zinc manganese dioxide battery have been modified (see Table 1 hereof, Table 1 of GB 24427-2009);
— The cadmium and lead contents of non-alkaline zinc manganese dioxide battery have been modified (see Table 1 hereof, Table 1 of GB 24427-2009);
— The cadmium and lead contents of zinc-air and zinc-silver oxide button batteries have been increased (see Table 1 hereof).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The issuing body of this document shall not be held responsible for identifying any or all such patent rights.
This document was proposed by and is under the jurisdiction of the Ministry of Industry and Information Technology of the People's Republic of China.
The previous editions of this document and documents replaced by this document are as follows:
— GB 24427-2009;
— GB 24428-2009;
— This edition is the first revision.
Content limitation of mercury, cadmium and lead for zinc anode primary battery
1 Scope
This document specifies the limitation requirements, inspection methods and conformity requirements of mercury, cadmium and lead contents of standardized zinc manganese dioxide battery, zinc-silver oxide battery and zinc-air battery.
This document is applicable to the production, inspection and acceptance of standardized zinc manganese dioxide battery, zinc-silver oxide battery and zinc-air battery and battery composed by several primary cells.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 8897.1 Primary batteries — Part 1: General
GB/T 8897.2 Primary batteries — Part 2: Physical and electrical specifications
GB/T 8897.3 Primary batteries — Part 3: Watch batteries
GB/T 20155 Determination of mercury, cadmium and lead in battery
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
primary cell
basic functional unit of power supply, which is designed as non-chargeable and can directly convert chemical energy into electrical energy
Note to entry: It consists of electrodes, electrolyte, a container, terminals and usually an isolation layer.
3.2
primary battery
battery consisting of one or multiple primary batteries and equipped with necessary devices for use (e.g., shell, terminals, marks and protective devices)
3.3
button battery
cylindrical batteries with total height less than diameter, shaped like buttons or coins
3.4
small button battery
button batteries with mass less than 1 g
3.5
mercury-free battery
button batteries with mercury content not greater than 5 μg/g, and other batteries with mercury content not greater than 1 μg/g
3.6
cadmium-free battery
batteries with cadmium content not greater than 20 μg/g
3.7
lead-free battery
batteries with lead content not greater than 40 μg/g
3.8
zinc anode primary battery
primary batteries with zinc as anode include but are not limited to zinc manganese dioxide batteries, zinc-silver oxide batteries and zinc-air batteries
4 Standardized zinc-silver oxide, zinc-air and zinc manganese dioxide button batteries
4.1 Zinc-silver oxide button battery
The standardized zinc-silver oxide batteries specified in GB/T 8897.2 include SR41, SR42, SR43, SR44, SR48, SR54, SR55, SR57, SR58, SR59, SR60, SR62, SR63, SR64, SR65, SR66, SR67, SR68 and SR69 batteries.
The standardized zinc-silver oxide button batteries specified in GB/T 8897.3 include SR516, SR521, SR527, SR614, SR616, SR621, SR626, SR712, SR714, SR716, SR721, SR726, SR731, SR736, SR754, SR916, SR920, SR927, SR936, SR1126, SR1130, SR1136, SR1142 and SR1154 batteries.
4.2 Alkaline zinc-air button battery
The standardized alkaline zinc-air button batteries specified in GB/T 8897.2 include PR70, PR41, PR48 and PR44 batteries.
4.3 Alkaline zinc manganese dioxide button battery
The standardized alkaline zinc manganese dioxide button batteries specified in GB/T 8897.2 include LR9, LR41, LR55, LR54, LR43 and LR44 batteries.
5 Content limitation of mercury, cadmium and lead for zinc anode primary battery
See Table 1 for the content limitation of mercury, cadmium and lead for zinc anode primary batteries.
Other zinc-silver oxide, zinc-air and zinc manganese dioxide button batteries that have not been standardized shall comply with the requirements of Table 1.
Contents of GB 24427-2021
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Standardized zinc-silver oxide, zinc-air and zinc manganese dioxide button batteries
5 Content limitation of mercury, cadmium and lead for zinc anode primary battery
6 Test method of mercury, cadmium and lead contents for batteries
7 Compliance judgment of mercury, cadmium and lead contents in batteries
8 Marking
Annex A (Informative) Size codes comparison table of button batteries named differently by new and old models
