GB/T 1962.1-2015 Conical fittings with a 6%(Luer) taper for syringes,needles and certain other medical equipment—Part 1: General requirement (English Version)
Conical Fittings with a 6% (Luer) Taper for Syringes, Needles and Certain Other Medical Equipment — Part 1: General Requirement
1 Scope
This part of GB/T 1962 specifies dimensions, requirements and test methods for conical fittings with a 6% (Luer) taper for use with hypodermic syringes and needles and with certain other apparatus for medical use.
This part is applicable to conical fittings made of rigid and of semi-rigid materials and with a 6% (Luer) taper for use with hypodermic syringes and needles and with certain other apparatus for medical use (hereinafter referred to as conical fittings). It is not applicable to conical fittings with a 6% (Luer) taper and made of more flexible or elastomeric materials.
Figure 1 illustrates typical male 6% (Luer) conical fitting (“male fitting”) and female 6% (Luer) conical fitting (“female fitting”).
Note: It is not practicable to define the characteristics of rigid or semi-rigid materials with precision, but glass and metal may be considered as typical rigid materials. By contrast, many plastic materials may be regarded as semi-rigid although the wall thickness is an important factor influencing the rigidity of a component.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 7886 Sterile Hypodermic Syringes for Single Use
Foreword II
1 Scope
2 Normative References
3 Dimensions
4 Requirements
5 Test Methods
Annex A (Informative) Liquid Leakage
GB/T 1962.1-2015 Conical fittings with a 6%(Luer) taper for syringes,needles and certain other medical equipment—Part 1: General requirement (English Version)
Standard No.
GB/T 1962.1-2015
Status
valid
Language
English
File Format
PDF
Word Count
6000 words
Price(USD)
120.0
Implemented on
2017-1-1
Delivery
via email in 1 business day
Detail of GB/T 1962.1-2015
Standard No.
GB/T 1962.1-2015
English Name
Conical fittings with a 6%(Luer) taper for syringes,needles and certain other medical equipment—Part 1: General requirement
Conical Fittings with a 6% (Luer) Taper for Syringes, Needles and Certain Other Medical Equipment — Part 1: General Requirement
1 Scope
This part of GB/T 1962 specifies dimensions, requirements and test methods for conical fittings with a 6% (Luer) taper for use with hypodermic syringes and needles and with certain other apparatus for medical use.
This part is applicable to conical fittings made of rigid and of semi-rigid materials and with a 6% (Luer) taper for use with hypodermic syringes and needles and with certain other apparatus for medical use (hereinafter referred to as conical fittings). It is not applicable to conical fittings with a 6% (Luer) taper and made of more flexible or elastomeric materials.
Figure 1 illustrates typical male 6% (Luer) conical fitting (“male fitting”) and female 6% (Luer) conical fitting (“female fitting”).
Note: It is not practicable to define the characteristics of rigid or semi-rigid materials with precision, but glass and metal may be considered as typical rigid materials. By contrast, many plastic materials may be regarded as semi-rigid although the wall thickness is an important factor influencing the rigidity of a component.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 7886 Sterile Hypodermic Syringes for Single Use
Contents of GB/T 1962.1-2015
Foreword II
1 Scope
2 Normative References
3 Dimensions
4 Requirements
5 Test Methods
Annex A (Informative) Liquid Leakage
