Standard No.:	GB/T 25032-2010
English Name:	Municipal solid waste incineration bottom ash aggregate
Chinese Name:	生活垃圾焚烧炉渣集料
Chinese Classification:	Z68    Urban domestic pollution source control standards
Professional Classification:	GB    National Standard
Source Content Issued by:	AQSIQ; SAC
Issued on:	2010-9-2
Implemented on:	2011-5-1
Status:	valid
Target Language:	English
File Format:	PDF
Word Count:	4000 words
Translation Price(USD):	100.0
Delivery:	via email in 1 business day

1 Scope This standard specifies the definitions, raw material requirements, requirements, test methods, inspection rules, marking, packaging, storage and transportation of municipal solid waste incineration aggregate. This standard is applicable to aggregate which is made-up by processing the municipal solid waste incineration bottom ash and used for making road subgrade, cushion course, subbase course, base course and plain concrete products. 2 Normative References The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies. GB 5085.3 Identification Standards for Hazardous Wastes-Identification for Extraction Toxicity GB 6566 Limits of Radionuclides in Building Materials GB/T 17431.2-1998 Lightweight Aggregates and Its Test Methods - Part 2: Test Methods for Lightweight Aggregates GB 18485 Standard for Pollution Control on the Municipal Solid Waste Incineration HJ/T 20-1998 Technical Specifications on Sampling and Sample Preparation from Industry Solid Waste 3 Terms and Definitions For the purposes of this standard, the following terms and definitions apply. 3.1 Aggregate

Foreword I 1 Scope 2 Normative References 3 Terms and Definitions 4 Technical Requirements 5 Test Method 6 Inspection Rule 7 Marking, Packaging, Transportation and Storage Appendix A (Normative) Determination of Particle Size Appendix B (Normative) Determination of Iron Content Appendix C (Normative) Determination for the Content of Metal Object Appendix D (Normative) Determination for the Content of Lightweight Suspended Solid Appendix E (Normative) Determination of Moisture Content Appendix F (Normative) Determination of Cylinder Pressure Intensity