This standard specifies the requirements, test method, inspection rule, marking, packing, transporting, storing and contract contents for titanium and titanium alloy plate and sheet.
This standard is applicable to the titanium and titanium alloy plate and sheet for various purposes.
2 Normative References
The following documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, all parties coming to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of these standards. For undated references, the latest editions of the normative documents referred to apply.
GB/T 228 Metallic Materials - Tensile Testing at Ambient Temperature
GB/T 232 Metallic Materials - Bend Test
GB/T 2039 Metallic Materials - Creep and Stress-rupture Test in Tension
GB/T 3620.1 Designation and Composition of Titanium and Titanium Alloys
GB/T 3620.2 Titanium and Titanium Alloys - Permissible Variations of Chemical Composition for Wrought Product Analysis
GB/T 4338 Metallic Materials - Tensile Testing at Elevated Temperature
GB/T 4698Methods for Chemical Analysis of Titanium Sponge, Titanium and Titanium Alloys (All Parts)
GB/T 8180 Wrought Titanium and Titanium Alloy Products Packing Marking Transporting and Storing
3 Requirements
3.1 Product classification
3.1.1 Product designation, manufacturing method, supply state and specification classification
Foreword I 1 Scope 2 Normative References 3 Requirements 4 Test Method 5 Inspection Rule 6 Marking, Packing, Transporting and Storing 7 Order (or Contract) Content
1 Scope
This standard specifies the requirements, test method, inspection rule, marking, packing, transporting, storing and contract contents for titanium and titanium alloy plate and sheet.
This standard is applicable to the titanium and titanium alloy plate and sheet for various purposes.
2 Normative References
The following documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, all parties coming to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of these standards. For undated references, the latest editions of the normative documents referred to apply.
GB/T 228 Metallic Materials - Tensile Testing at Ambient Temperature
GB/T 232 Metallic Materials - Bend Test
GB/T 2039 Metallic Materials - Creep and Stress-rupture Test in Tension
GB/T 3620.1 Designation and Composition of Titanium and Titanium Alloys
GB/T 3620.2 Titanium and Titanium Alloys - Permissible Variations of Chemical Composition for Wrought Product Analysis
GB/T 4338 Metallic Materials - Tensile Testing at Elevated Temperature
GB/T 4698Methods for Chemical Analysis of Titanium Sponge, Titanium and Titanium Alloys (All Parts)
GB/T 8180 Wrought Titanium and Titanium Alloy Products Packing Marking Transporting and Storing
3 Requirements
3.1 Product classification
3.1.1 Product designation, manufacturing method, supply state and specification classification
Contents of GB/T 3621-2007
Foreword I
1 Scope
2 Normative References
3 Requirements
4 Test Method
5 Inspection Rule
6 Marking, Packing, Transporting and Storing
7 Order (or Contract) Content
