Standard No.:	JB/T 5000.3-2007
English Name:	Heavy mechanical general techniques and standards-Part 3:And standards welding
Chinese Name:	重型机械通用技术条件 第3部分：焊接件
Chinese Classification:	J33    Welding and cutting
Professional Classification:	JB    Professional Standard - Machinery
Source Content Issued by:	NDRC
Issued on:	2007-8-28
Implemented on:	2008-2-1
Status:	abolished
Abolished on:	2024-07-11
Superseding:	JB/T 5000.3-1998 The heavy mechanical general techniques and STANDARDs Welding
Target Language:	English
File Format:	PDF
Word Count:	5000 words
Translation Price(USD):	80.0
Delivery:	via email in 1 business day

1 Scope This part of JB/T 5000 specifies technical requirements, testing method and drawing marking of steel welding parts. This part is applicable to the steel welding parts welded by methods such as shielded metal arc welding, gas shielded welding and submerged-arc welding. Where no special requirements are stated in the product drawing, technical document or technical specifications for procurement, all shall meet those specified in this part. 2 Normative References The following normative documents contain provisions which, through reference in this Part of JB/T 5000, constitute provisions of this Part. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties whose enter into agreement according to this Part are encouraged to research whether the latest editions of these references are applied or not. For undated references, the latest edition of the normative document is applicable to this standard. GB/T 324 Welds-symbolic representation on drawings (GB/T324-1988,eqv ISO 2553:1989) GB/T 985 Basic Forms and Sizes of Weld Grooves for Gas Welding, Manual Arc Welding and Gas-shielded Arc Welding GB/T 986 Basic Forms and Sizes of Submerged Arc Weld Grooves GB/T 2649 Methods of sampling for mechanical properties tests of welded joint GB/T 2650 Impact Test Methods on Welded Joints GBTF 2651 Tensile test method on welded joints GB/T 2652 Tensile Test Methods on Weld and Deposited Metal GB/T 2653 Methods of Bend and Compression Tests for Welded Joint GB/T 2654 Methods of Hardness Tests for Welded Joint and Surfacing Metal GB/T 3323 Radiographic Examination of Fusion Welded Joints in Metallic Materials (GB/T 3323-2005, EN 135:1997, MOD) GB/T 11345 Method for Manual Ultrasonic Testing and Classification of Testing Results for Ferritic Steel Welds JB/T 3223 Quality management requirements of welding material JB/T 4735 Steel Welded Atmospheric Pressure Vessels JB/T 5000.2 Heavy Mechanical General Techniques and Standards - Part 2: Oxygen cutting workpiece JB/T 5000.11 Heavy Mechanical General Techniques and Standards - Part 11: Attached piping JB/T 5000.12 Heavy Mechanical General Techniques and Standards - Part 12: Paint JB/T 5926 Vibrating stress relief effect-evaluation methods JB/T 6046 Post-weld heat treatment methods for welded members of carbon steel and low alloy steel JB/T 6061 Non-destructive testing-Magnetic Particle testing of Welds JB/T 7949 Weld outer dimensions for steel construction 3 General Requirements 3.1 The manufacturing of welding (weldment) shall meet the requirements of design drawing, process document and this Part. 3.2 The steel type, specification and dimension of the materials (steel plate, section steel and steel pipe etc.) used to manufacture welding shall meet the requirements of design drawing, and material substitution shall be transacted with substitution sheet in accordance with relevant provisions. 3.3 The materials, welding materials (welding rod, welding wire, welding flux, shielding gas etc.) used to manufacture welding entering factory, they may enter the storehouse after being accepted by the quality control division according to the "material pre-working acceptance regulations" of the factory based on the certificate of compliance provided by the supplier, as well as corresponding national (professional) standard and ordering requirements.

Contents Foreword 1 Scope 2 Normative References 3 General Requirements 4 Preliminary Correction of Steel 5 Molding Bending of Steel 6 Welding Assembly 7 Weld 8 Machining Allowance of Welded Structure Parts 9 Welded Joint and Groove 10 Inspection 11 Drawing Mark