SJ/T 11364-2024 Labeling requirements for restricted use of hazardous substances in electrical and electronic products
1 Scope
This document specifies the labeling method and requirements of information on hazardous substances in electrical and electronic products.
This document is applicable to electrical and electronic products sold within the territory of the People's Republic of China, and may also be used as a reference in the logistics process of electrical and electronic products.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 26572 Requirements of concentration limits for certain restricted substances in electrical and electronic products
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
electrical and electronic products
equipment and matching products that operate on the basis of current or electromagnetic fields, or are intended for the generation, transmission, and measurement of current and electromagnetic fields, with a rated operating voltage of DC not exceeding 1,500V and AC not exceeding 1,000V
Note: Equipment involved in the generation, transmission, and distribution of electrical energy is excluded.
3.2
hazardous substance
substance contained in electrical and electronic products that is harmful to humans, animals, plants, and the environment
[Source: SJ/T 11468-2014, 2.2.3, modified]
3.3
environment-friendly use period (EFUP)
period during which the hazardous substances contained in electrical and electronic products will not leak or mutate, and will not cause serious environmental pollution or severe damage to persons or property when the products are used normally according to the product instructions
The starting date of the EFUP for electrical and electronic products is the production date of the product.
3.4
labeling
process of labeling information on hazardous substances in electrical and electronic products
4 General
The manufacturers or importers of electrical and electronic products shall label the information regarding the presence of hazardous substances in the products in accordance with the requirements of this document.
Products purchased for the purpose of production support do not need to be labeled with the restricted use of hazardous substances in electrical and electronic products, but the supplier shall provide all the necessary information for labeling as required by the purchaser.
5 Labeling of hazardous substances containing information in products
5.1 Labeling
If the content of hazardous substances in the product meets the requirements of GB/T 26572, the manufacturer or importer of electrical and electronic products shall label it according to Figure 1. If the content of hazardous substances in the product does not meet the requirements of GB/T 26572, the product shall be labeled according to Figure 2, and the name and containing information of hazardous substances in the product shall be provided according to the requirements of 5.2.
Note: The number specified in Figure 2 is for illustrative purposes only and shall be replaced with the corresponding EFUP for electrical and electronic products when in use.
Figure 1 Labeling I Figure 2 Labeling II
For products labeled with Figure 2, the manufacturers or importers of electrical and electronic products may determine the EFUP of the products by referring to SJ/Z 11388 or the guidelines provided by relevant industry organizations.
5.2 Table of names and containing information of hazardous substances in electrical and electronic products
5.2.1 See Figure 3 for the table of names and containing information of hazardous substances in electrical and electronic products (hereinafter referred to as "information table"), in which:
a) The first row of the information table is the header, the first column is the name of the product part, and the other columns shall be filled out one by one with the abbreviations of the hazardous substances and in the order specified in Annex A. The method of dividing parts in the information table shall be determined by the manufacturer or importer of the electrical and electronic products.
Foreword i Introduction iii 1 Scope 2 Normative references 3 Terms and definitions 4 General 5 Labeling of hazardous substances containing information in products 5.1 Labeling 5.2 Table of names and containing information of hazardous substances in electrical and electronic products 5.3 Other indicative information 6 Labeling requirements 7 Data preservation Annex A (Normative) Hazardous substances Annex B (Normative) Specification and interpretation of the labeling for restricted use of hazardous substances in electrical and electronic products Annex C (Informative) List of drafting organizations of this document Bibliography
SJ/T 11364-2024 Labeling requirements for restricted use of hazardous substances in electrical and electronic products
1 Scope
This document specifies the labeling method and requirements of information on hazardous substances in electrical and electronic products.
This document is applicable to electrical and electronic products sold within the territory of the People's Republic of China, and may also be used as a reference in the logistics process of electrical and electronic products.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 26572 Requirements of concentration limits for certain restricted substances in electrical and electronic products
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
electrical and electronic products
equipment and matching products that operate on the basis of current or electromagnetic fields, or are intended for the generation, transmission, and measurement of current and electromagnetic fields, with a rated operating voltage of DC not exceeding 1,500V and AC not exceeding 1,000V
Note: Equipment involved in the generation, transmission, and distribution of electrical energy is excluded.
3.2
hazardous substance
substance contained in electrical and electronic products that is harmful to humans, animals, plants, and the environment
[Source: SJ/T 11468-2014, 2.2.3, modified]
3.3
environment-friendly use period (EFUP)
period during which the hazardous substances contained in electrical and electronic products will not leak or mutate, and will not cause serious environmental pollution or severe damage to persons or property when the products are used normally according to the product instructions
The starting date of the EFUP for electrical and electronic products is the production date of the product.
3.4
labeling
process of labeling information on hazardous substances in electrical and electronic products
4 General
The manufacturers or importers of electrical and electronic products shall label the information regarding the presence of hazardous substances in the products in accordance with the requirements of this document.
Products purchased for the purpose of production support do not need to be labeled with the restricted use of hazardous substances in electrical and electronic products, but the supplier shall provide all the necessary information for labeling as required by the purchaser.
5 Labeling of hazardous substances containing information in products
5.1 Labeling
If the content of hazardous substances in the product meets the requirements of GB/T 26572, the manufacturer or importer of electrical and electronic products shall label it according to Figure 1. If the content of hazardous substances in the product does not meet the requirements of GB/T 26572, the product shall be labeled according to Figure 2, and the name and containing information of hazardous substances in the product shall be provided according to the requirements of 5.2.
Note: The number specified in Figure 2 is for illustrative purposes only and shall be replaced with the corresponding EFUP for electrical and electronic products when in use.
Figure 1 Labeling I Figure 2 Labeling II
For products labeled with Figure 2, the manufacturers or importers of electrical and electronic products may determine the EFUP of the products by referring to SJ/Z 11388 or the guidelines provided by relevant industry organizations.
5.2 Table of names and containing information of hazardous substances in electrical and electronic products
5.2.1 See Figure 3 for the table of names and containing information of hazardous substances in electrical and electronic products (hereinafter referred to as "information table"), in which:
a) The first row of the information table is the header, the first column is the name of the product part, and the other columns shall be filled out one by one with the abbreviations of the hazardous substances and in the order specified in Annex A. The method of dividing parts in the information table shall be determined by the manufacturer or importer of the electrical and electronic products.
Contents of SJ/T 11364-2024
Foreword i
Introduction iii
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 Labeling of hazardous substances containing information in products
5.1 Labeling
5.2 Table of names and containing information of hazardous substances in electrical and electronic products
5.3 Other indicative information
6 Labeling requirements
7 Data preservation
Annex A (Normative) Hazardous substances
Annex B (Normative) Specification and interpretation of the labeling for restricted use of hazardous substances in electrical and electronic products
Annex C (Informative) List of drafting organizations of this document
Bibliography
