Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by China National Textile and Apparel Council.
This standard is under the jurisdiction of National Technical Committee on Textiles of Standardization Administration of China (SAC/TC 209/SC 6).
Knitted jackets
1 Scope
This standard specifies terms and definitions, standard sizing systems for products, requirements, inspection rules, judgement rules, product instructions, packaging, transport and storage of knitted jackets.
It is applicable to the quality appraisal of jackets mainly made of textile and knitted fabrics.
But it is not applicable to garments for infants aged 36 months and below.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 250 Textiles - Tests for colour fastness - Grey scale for assessing change in colour
GB/T 1335 (All parts) Standard sizing systems for garments
GB/T 2910 (All parts) Textiles - Quantitative chemical analysis
GB/T 2912.1 Textiles - Determination of formaldehyde - Part 1: Free and hydrolyzed formaldehyde (Water extraction method)
GB/T 3920 Textiles - Tests for colour fastness - Colour fastness to rubbing
GB/T 3921-2008 Textiles - Tests for colour fastness - Colour fastness to washing with soap or soap and soda
GB/T 3922 Textiles - Tests for colour fastness - Colour fastness to perspiration
GB/T 4802.1-2008 Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 1: Circular locus method
GB/T 4802.3 Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 3: Pilling box method
GB/T 4856 Package of cotton goods and knitwear
GB/T 5296.4 Instructions for use of products of consumer interest - Part 4: Textiles and apparel
GB/T 5711 Textiles - Tests for colour fastness - Colour fastness to dry cleaning using perchloroethylene solvent
GB/T 5713 Textiles - Tests for colour fastness - Colour fastness to water
GB/T 7573 Textiles - Determination of pH of the aqueous extract
GB/T 8170 Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 8427-2008 Textiles - Tests for colour fastness - Colour fastness to artificial light: Xenon arc fading lamp test
GB/T 8629-2017 Textiles - Domestic washing and drying procedures for textile testing
GB/T 13769 Textiles - Test method for assessing the smoothness appearance of fabrics after cleansing
GB/T 14801 Test method for skewness and bow in woven and knitted fabrics
GB/T 17592 Textiles - Determination of the banned azo colourants
GB 18401 National general safety technical code for textile products
GB/T 19976-2005 Textiles - Determination of bursting strength - Steel ball method
GB/T 21294-2014 Testing methods of physical and chemical performance of garments
GB/T 29862 Textiles - Identification of fiber content
GB/T 31127-2014 Textiles - Tests for colour fastness - Colour fastness to transfer in joints
GB 31701 Safety technical code for infants and children textile products
FZ/T 01026 Textiles - Quantitative chemical analysis - Multinary fibre mixtures
FZ/T 01057 (All parts) Test method for identification of textile fibres
FZ/T 01095 Textiles - Test method of eastane fibre content
FZ/T 01101 Textile test method - Fiber content - Quantitative physical analysis
FZ/T 80007.3-2006 Dry wash resistance test method for garments used adhesive interlining
GSB 16-1523 Knitted fabric fuzzing and pilling sample photograph
GSB 16-2922 Standard sample photos of woollen knitwear pilling
GSB 16-2923 Standard sample photos of combing woollen knitwear pilling
3 Terms and definitions
For the purposes of this document, the following term and definition apply.
3.1
knitted woolen fabric
knitted fabrics, similar to woven woolen fabrics, made according to the procedures of knitting, fulling and felt finishing using cashmere or wool of 50% and above as raw materials
4 Standard sizing systems for products
The standard sizing systems shall meet the requirements of GB/T 1335 (all parts).
5 Requirements
5.1 Requirement contents
The requirements are divided into three aspects, i.e. inherent quality requirements, appearance quality requirements and raw material requirements. The inherent quality requirements cover such indexes as fiber content, bursting strength, formaldehyde content, pH value, peculiar smell, decomposable carcinogenic aromatic amine dyes, dimensional change rate by water washing, dimensional change rate by dry cleaning, pilling, colour fastness to dry cleaning, colour fastness to washing with soap or soap and soda, colour fastness to water, colour fastness to perspiration, colour fastness to rubbing, colour fastness to light, colour fastness to transfer in joints, seam slippage, and appearance quality after water washing (dry cleaning). Appearance quality requirements cover such indexes as surface defect, specification and dimension deviation, dimensional difference at symmetric parts, strip matching and plaid matching and sewing requirements. Raw material requirements cover such indexes as fabrics, lining and accessory fabrics.
5.2 Grading requirements
5.2.1 The products are classified into superior products, first-grade products and qualified products in terms of the quality grade.
5.2.2 The products are graded by batches in terms of inherent quality and by pieces in terms of appearance quality, and the lowest grade shall prevail in case of a combination of both.
5.2.3 For all inherent quality indexes, the minimum test result is regarded as the grading basis for this batch of products.
5.2.4 Where appearance quality problems of different product grades are found on the same product, the product shall be graded according to the lowest quality grade. For one product, no more than two limit surface defects of the same grade are allowed to exist; otherwise, this product shall be degraded by one grade.
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Standard sizing systems for products
5 Requirements
6 Inspection rules
7 Judgement rules
8 Product instruction, packaging, transport and storage
Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by China National Textile and Apparel Council.
This standard is under the jurisdiction of National Technical Committee on Textiles of Standardization Administration of China (SAC/TC 209/SC 6).
Knitted jackets
1 Scope
This standard specifies terms and definitions, standard sizing systems for products, requirements, inspection rules, judgement rules, product instructions, packaging, transport and storage of knitted jackets.
It is applicable to the quality appraisal of jackets mainly made of textile and knitted fabrics.
But it is not applicable to garments for infants aged 36 months and below.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 250 Textiles - Tests for colour fastness - Grey scale for assessing change in colour
GB/T 1335 (All parts) Standard sizing systems for garments
GB/T 2910 (All parts) Textiles - Quantitative chemical analysis
GB/T 2912.1 Textiles - Determination of formaldehyde - Part 1: Free and hydrolyzed formaldehyde (Water extraction method)
GB/T 3920 Textiles - Tests for colour fastness - Colour fastness to rubbing
GB/T 3921-2008 Textiles - Tests for colour fastness - Colour fastness to washing with soap or soap and soda
GB/T 3922 Textiles - Tests for colour fastness - Colour fastness to perspiration
GB/T 4802.1-2008 Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 1: Circular locus method
GB/T 4802.3 Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 3: Pilling box method
GB/T 4856 Package of cotton goods and knitwear
GB/T 5296.4 Instructions for use of products of consumer interest - Part 4: Textiles and apparel
GB/T 5711 Textiles - Tests for colour fastness - Colour fastness to dry cleaning using perchloroethylene solvent
GB/T 5713 Textiles - Tests for colour fastness - Colour fastness to water
GB/T 7573 Textiles - Determination of pH of the aqueous extract
GB/T 8170 Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 8427-2008 Textiles - Tests for colour fastness - Colour fastness to artificial light: Xenon arc fading lamp test
GB/T 8629-2017 Textiles - Domestic washing and drying procedures for textile testing
GB/T 13769 Textiles - Test method for assessing the smoothness appearance of fabrics after cleansing
GB/T 14801 Test method for skewness and bow in woven and knitted fabrics
GB/T 17592 Textiles - Determination of the banned azo colourants
GB 18401 National general safety technical code for textile products
GB/T 19976-2005 Textiles - Determination of bursting strength - Steel ball method
GB/T 21294-2014 Testing methods of physical and chemical performance of garments
GB/T 29862 Textiles - Identification of fiber content
GB/T 31127-2014 Textiles - Tests for colour fastness - Colour fastness to transfer in joints
GB 31701 Safety technical code for infants and children textile products
FZ/T 01026 Textiles - Quantitative chemical analysis - Multinary fibre mixtures
FZ/T 01057 (All parts) Test method for identification of textile fibres
FZ/T 01095 Textiles - Test method of eastane fibre content
FZ/T 01101 Textile test method - Fiber content - Quantitative physical analysis
FZ/T 80007.3-2006 Dry wash resistance test method for garments used adhesive interlining
GSB 16-1523 Knitted fabric fuzzing and pilling sample photograph
GSB 16-2922 Standard sample photos of woollen knitwear pilling
GSB 16-2923 Standard sample photos of combing woollen knitwear pilling
3 Terms and definitions
For the purposes of this document, the following term and definition apply.
3.1
knitted woolen fabric
knitted fabrics, similar to woven woolen fabrics, made according to the procedures of knitting, fulling and felt finishing using cashmere or wool of 50% and above as raw materials
4 Standard sizing systems for products
The standard sizing systems shall meet the requirements of GB/T 1335 (all parts).
5 Requirements
5.1 Requirement contents
The requirements are divided into three aspects, i.e. inherent quality requirements, appearance quality requirements and raw material requirements. The inherent quality requirements cover such indexes as fiber content, bursting strength, formaldehyde content, pH value, peculiar smell, decomposable carcinogenic aromatic amine dyes, dimensional change rate by water washing, dimensional change rate by dry cleaning, pilling, colour fastness to dry cleaning, colour fastness to washing with soap or soap and soda, colour fastness to water, colour fastness to perspiration, colour fastness to rubbing, colour fastness to light, colour fastness to transfer in joints, seam slippage, and appearance quality after water washing (dry cleaning). Appearance quality requirements cover such indexes as surface defect, specification and dimension deviation, dimensional difference at symmetric parts, strip matching and plaid matching and sewing requirements. Raw material requirements cover such indexes as fabrics, lining and accessory fabrics.
5.2 Grading requirements
5.2.1 The products are classified into superior products, first-grade products and qualified products in terms of the quality grade.
5.2.2 The products are graded by batches in terms of inherent quality and by pieces in terms of appearance quality, and the lowest grade shall prevail in case of a combination of both.
5.2.3 For all inherent quality indexes, the minimum test result is regarded as the grading basis for this batch of products.
5.2.4 Where appearance quality problems of different product grades are found on the same product, the product shall be graded according to the lowest quality grade. For one product, no more than two limit surface defects of the same grade are allowed to exist; otherwise, this product shall be degraded by one grade.
Contents of FZ/T 73061-2019
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Standard sizing systems for products
5 Requirements
6 Inspection rules
7 Judgement rules
8 Product instruction, packaging, transport and storage
