2023-1-28 3.93.74.25
Code of China Chinese Classification Professional Classification ICS Classification Latest News Value-added Services

Position: Chinese Standard in English/GB 11120-2011
GB 11120-2011   Lubricating oils for turbines (English Version)
Standard No.: GB 11120-2011 Status:valid remind me the status change

Email:

Language:English File Format:PDF
Word Count: 7000 words Price(USD):170.0 remind me the price change

Email:

Implemented on:2012-6-1 Delivery: via email in 1 business day
,,
Standard No.: GB 11120-2011
English Name: Lubricating oils for turbines
Chinese Name: 涡轮机油
Chinese Classification: E34    Lubricating oil
Professional Classification: GB    National Standard
Issued by: AQSIQ,SAC
Issued on: 2011-12-5
Implemented on: 2012-6-1
Status: valid
Superseding:GB 11120-1989 Turbine oils L-TSA
Language: English
File Format: PDF
Word Count: 7000 words
Price(USD): 170.0
Delivery: via email in 1 business day
1 Scope This standard specifies the product variety and labeling, requirements, test methods, inspection rules and marking, packaging, transportation and storage of lubricating oils for turbines. This standard is applicable to lubricating oils for turbines used in turbine lubricating and control systems of power plants, including steam turbines, water turbines, gas turbines and gas-steam combined cycle turbines with common lubricating systems, which are made by refined mineral oil or synthetic raw materials as base oil and adding various additives such as antioxidants, corrosion inhibitors, and anti-wear agents. It is also applicable to turbine oil used in lubricating systems of turbine drive devices for other industrial or marine applications. This standard is not applicable to anti-combustion turbine oil and water turbine lubricant with special requirements. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 261 Determination of flash point - Pensky-Martens closed cup method GB/T 265 Petroleum products - Determination of kinematic viscosity and calculation of dynamic viscosity GB/T 1884 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method GB/T 1885 Petroleum measurement tables GB/T 1995 Petroleum products - Calculation of viscosity index GB/T 2541 Petroleum products - Computation table for viscosity indices GB/T 3141 Industrial liquid lubricants - ISO viscosity classification GB/T 3535 Petroleum products - Determination of pour point GB/T 3536 Petroleum products - Determination of flash and fire points - Cleveland open cup method GB/T 4756 Petroleum liquids - Manual sampling GB/T 4945 Standard test method for acid and base number of petroleum products and lubricants by colour-indicator titration GB/T 5096 Petroleum Products - Corrosiveness to copper; Copper Strip Test GB/T 6540 Petroleum products - Determination of colour GB/T 7304 Standard test method for acid number of petroleum products by potentiometric titration
Foreword i 1 Scope 2 Normative references 3 Product variety and labeling 4 Requirements and test methods 5 Inspection rules 6 Marking, packaging, transportation and storage Annex A (Normative) Rubber compatibility index Annex B (Information) Main changes of TSA varieties in this standard compared with GB 11120-1989
Referred in GB 11120-2011:
*GB/T 261-2008 Determination of flash point - Pensky-Martens closed cup method
*GB/T 265-1988 Petroleum Products - Determination of Kinematic Viscosity and Calculation of Dynamic Viscosity
*GB/T 1884-2000 Crude Petroleum and Liquid Petroleum Products - Laboratory Determination of Density - Hydrometer Method
*GB/T 1885-1998 Petroleum measurement tables
*GB/T 1995-1998 Petroleum products - Calculation of viscosity index
*GB/T 2541-1981 Petroleum products;Computation table for viscosity indices
*GB/T 3141-1994 Industrial liquid lubricants-ISO viscosity classification
*GB/T 3535-2006 Petroleum products - Determination of pour point
*GB/T 3536-2008 Petroleum products - Determination of flash and fire points - Cleveland open cup method
*GB/T 4756-2015 Method for manual sampling of petroleum liquids
*GB/T 4945-2002 STANDARD test method for acid and base number of petroleum products and lubricants by--Colour-indicator titration
*GB/T 5096-2017 Test method for corrosiveness to copper from petroleum products by copper strip test
*GB/T 6540-1986 Petroleum products; Determination of colour
*GB/T 7304-2014 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
*GB/T 7305-2003 Standard test method for water separability of petroleum oils and synthetic fluids
*GB/T 7600-2014 Determination of water content in transformer oils and turbine oils in service by coulometric method
*GB/T 11133-2015 Standard test method for determination of water in petroleum products,lubricating oils,and additives―Coulometric Karl Fischer titration method
*GB/T 11143-2008 Standard test method for rust-preventing characteristics of inhibited mineral oil in the presence of water
*GB/T 12579-2002 Determination of foaming characteristics of lubricating oils
*GB/T 12581-2006 Standard test method for oxidation characteristics of inhibited mineral oils
*GB/T 14039-2002 Hydraulic fluid power--Fluids--Method for coding the level of contamination by solid particles
*GB/T 14832-2008 Test methods for compatibility between hydraulic fluids and standard elastomeric materials
*GB/T 18854-2015 Hydraulic fluid power - Calibration of automatic particle counters for liquids
*GB/T 19936.1-2005 Gears. FZG test procedures. Part 1: FZG test method A/8.3/90 for relative scuffing load-carrying capacity of oils
*GJB563-
*DL/T 432-2018
*SH/T 0163-1992 Petroleum products - Determination of total acid value - semi-Micro color indicator method
*SH 0164-1992
*SH/T 0193-2008 Lubricating oils-Determination of oxidation stability-Rotating pressure vessel method
*SH/T 0207-1992
*SH/T 0306-1992 Lubricants-Determination of Load-carrying Capacity (CL-100 Gear Method)
*SH/T 0308-1992 Determination Method for Air Release Value of Lubricating oils
*SH/T 0565-2008 Standard test method for determination of the sludging and corrosion tendencies of inhibited mineral oils
*SH/T 0604-2000 Crude petroleum and petroleum products-Determination of density-Oscillating U-tube method
*SH/T 0805-2008 Determination of the filterability of lubricating oils
GB 11120-2011 is referred in:
* DL/T 622-2012 Technical specifications of elastic metal-plastic segment for thrust bearings of vertical-shaft hydrogenerators
* DL/T 563-2004 Code of electro-hydraulic regulating system and unit for hydraulic turbines
*GB/T 7596-2017 In-service quality criteria of mineral turbine oils used in power plants
*GB/T 14541-2017 Guide for maintenance and supervision of in-service mineral turbine oil used for power plants
*GB/T 9652.1-2019 Specification of hydraulic turbine governing systems
*GB/T 6165-2021 Test method of the performance of high efficiency particulate air filter—Efficiency and resistance
Code of China
Standard
GB 11120-2011  Lubricating oils for turbines (English Version)
Standard No.GB 11120-2011
Statusvalid
LanguageEnglish
File FormatPDF
Word Count7000 words
Price(USD)170.0
Implemented on2012-6-1
Deliveryvia email in 1 business day
Detail of GB 11120-2011
Standard No.
GB 11120-2011
English Name
Lubricating oils for turbines
Chinese Name
涡轮机油
Chinese Classification
E34
Professional Classification
GB
ICS Classification
Issued by
AQSIQ,SAC
Issued on
2011-12-5
Implemented on
2012-6-1
Status
valid
Superseded by
Superseded on
Abolished on
Superseding
GB 11120-1989 Turbine oils L-TSA
Language
English
File Format
PDF
Word Count
7000 words
Price(USD)
170.0
Keywords
GB 11120-2011, GB/T 11120-2011, GBT 11120-2011, GB11120-2011, GB 11120, GB11120, GB/T11120-2011, GB/T 11120, GB/T11120, GBT11120-2011, GBT 11120, GBT11120
Introduction of GB 11120-2011
1 Scope This standard specifies the product variety and labeling, requirements, test methods, inspection rules and marking, packaging, transportation and storage of lubricating oils for turbines. This standard is applicable to lubricating oils for turbines used in turbine lubricating and control systems of power plants, including steam turbines, water turbines, gas turbines and gas-steam combined cycle turbines with common lubricating systems, which are made by refined mineral oil or synthetic raw materials as base oil and adding various additives such as antioxidants, corrosion inhibitors, and anti-wear agents. It is also applicable to turbine oil used in lubricating systems of turbine drive devices for other industrial or marine applications. This standard is not applicable to anti-combustion turbine oil and water turbine lubricant with special requirements. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 261 Determination of flash point - Pensky-Martens closed cup method GB/T 265 Petroleum products - Determination of kinematic viscosity and calculation of dynamic viscosity GB/T 1884 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method GB/T 1885 Petroleum measurement tables GB/T 1995 Petroleum products - Calculation of viscosity index GB/T 2541 Petroleum products - Computation table for viscosity indices GB/T 3141 Industrial liquid lubricants - ISO viscosity classification GB/T 3535 Petroleum products - Determination of pour point GB/T 3536 Petroleum products - Determination of flash and fire points - Cleveland open cup method GB/T 4756 Petroleum liquids - Manual sampling GB/T 4945 Standard test method for acid and base number of petroleum products and lubricants by colour-indicator titration GB/T 5096 Petroleum Products - Corrosiveness to copper; Copper Strip Test GB/T 6540 Petroleum products - Determination of colour GB/T 7304 Standard test method for acid number of petroleum products by potentiometric titration
Contents of GB 11120-2011
Foreword i 1 Scope 2 Normative references 3 Product variety and labeling 4 Requirements and test methods 5 Inspection rules 6 Marking, packaging, transportation and storage Annex A (Normative) Rubber compatibility index Annex B (Information) Main changes of TSA varieties in this standard compared with GB 11120-1989
About Us   |    Contact Us   |    Terms of Service   |    Privacy   |    Cancellation & Refund Policy   |    Payment
Tel: +86-10-8572 5655 | Fax: +86-10-8581 9515 | Email: coc@codeofchina.com | QQ: 672269886
Copyright: Foryou Tech Co., Ltd. 2008-2040
 
 
Keywords:
GB 11120-2011, GB/T 11120-2011, GBT 11120-2011, GB11120-2011, GB 11120, GB11120, GB/T11120-2011, GB/T 11120, GB/T11120, GBT11120-2011, GBT 11120, GBT11120