1 Scope
This Part specifies the requirements, testing methods, inspection rules, packageing, marking, transportation and content of contracts (or orders) of power electrostatic spray-painted extruded aluminium alloy profiles for architecture.
This Part applies to aluminium alloy hot extruded profieles coated with thermosetting organic polymetr powder for architecture (hereafter referred to as power coating profiels).
Other aluminium alloy materials that carry similar applications and similar surface treatmetns may refer to and adopt the content of this Part.
2 Normative References
After being referred, the provisions of the following documents become provisions of this Part. For dated reference documents, all later amendments (excluding corrigenda) and versions do not apply to this Part; However, the parties to the agreement are encouraged to study whether the latest versions of these documents are applicable. For undated reference documents, the latest versions apply to this Part.
GB/T 228-2002 Metallic materials –Tensile testing at ambient temperature;
GB/T 1732 Determination of impact resistance of films;
GB/T 1740 Determination of resistance to heat and humidity of paint films;
GB/T 1766 Paints and Varnishes – Rating schemes of degradation of coats;
GB/T 1865-1997 Paints and Varnishes – Artificial weathering and exposure to artificial radiation – Filtered xenon-arc radiation;
GB/T 3199 Wrought aluminium and aluminium alloy products – Packing, Marking, Transporting and storing
GB/T 4957 Non-conductive coatings on non-magnetic basic metals – Measurement of coating thickness – Eddy Current
GB 5237/1 Wrought aluminium alloy extruded profiles for architecture – Part 1: Untreated profiles;
GB/T 6461 Metallic and other Inorganic coating on metallic substrates – Rating of test specimens and manufactured articles subjected to corrosion tests;
GB/T 6682 Water for Analytical Laboratory use – specification and test methods;
GB/T 6742 Paints and varnishes – Bend test (cylindrical mandrel);
GB/T 8013,3 – 2007 Anodic oxide coatings and organic polymer coatings on aluminium and its alloys – Part 3: Organci Polymer coating;
GB/T 9275 Paints and varnishes – Buchholz indentation test
GB/T 9276 Mehods of exposure to natural weathering of coating
GB/T 9286 Paints and Varnishes – Cross-cut test for films;
GB/T 9753 Paints and varnishes – Cupping test
GB/T 9754 Paints and Varnishes – Measuremetn of Specular gloss of non metallic paints films with colors at 20°,60° and 85°;
GB/T 9761 Paints and Varnishes – Visual comparisons of the color of paints;
GB/T 10125 Corrosion tests in artifical atmospheres – salt spray tests;
GB/T 11186.2 Methods for measuring the color of paint films – Part 2: Colour measurement;
GB/T 11186.3 Methods for measuring the color of paint films – Part 3: Calculation of colur differences;
GB/T 1658 Vulcanised Rubber – Test method of resistance to artificial weathering (fluerescent UV lamp)
GB/T 20975 (all Parts) Chemical analysis methods of aluminium and aluminium alloys
JC/T 480 Unslaked Lime for architecture
Contents
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Requirements
5 Testing Methods
6 Inspection Rule
7 Marking, Packing, Transport and Storage
8 Content of Contract (or Order)
Appendix A (Normative) Method of Falling Sand Test
Appendix B (Normative) Solvent-resistance Test
1 Scope
This Part specifies the requirements, testing methods, inspection rules, packageing, marking, transportation and content of contracts (or orders) of power electrostatic spray-painted extruded aluminium alloy profiles for architecture.
This Part applies to aluminium alloy hot extruded profieles coated with thermosetting organic polymetr powder for architecture (hereafter referred to as power coating profiels).
Other aluminium alloy materials that carry similar applications and similar surface treatmetns may refer to and adopt the content of this Part.
2 Normative References
After being referred, the provisions of the following documents become provisions of this Part. For dated reference documents, all later amendments (excluding corrigenda) and versions do not apply to this Part; However, the parties to the agreement are encouraged to study whether the latest versions of these documents are applicable. For undated reference documents, the latest versions apply to this Part.
GB/T 228-2002 Metallic materials –Tensile testing at ambient temperature;
GB/T 1732 Determination of impact resistance of films;
GB/T 1740 Determination of resistance to heat and humidity of paint films;
GB/T 1766 Paints and Varnishes – Rating schemes of degradation of coats;
GB/T 1865-1997 Paints and Varnishes – Artificial weathering and exposure to artificial radiation – Filtered xenon-arc radiation;
GB/T 3199 Wrought aluminium and aluminium alloy products – Packing, Marking, Transporting and storing
GB/T 4957 Non-conductive coatings on non-magnetic basic metals – Measurement of coating thickness – Eddy Current
GB 5237/1 Wrought aluminium alloy extruded profiles for architecture – Part 1: Untreated profiles;
GB/T 6461 Metallic and other Inorganic coating on metallic substrates – Rating of test specimens and manufactured articles subjected to corrosion tests;
GB/T 6682 Water for Analytical Laboratory use – specification and test methods;
GB/T 6742 Paints and varnishes – Bend test (cylindrical mandrel);
GB/T 8013,3 – 2007 Anodic oxide coatings and organic polymer coatings on aluminium and its alloys – Part 3: Organci Polymer coating;
GB/T 9275 Paints and varnishes – Buchholz indentation test
GB/T 9276 Mehods of exposure to natural weathering of coating
GB/T 9286 Paints and Varnishes – Cross-cut test for films;
GB/T 9753 Paints and varnishes – Cupping test
GB/T 9754 Paints and Varnishes – Measuremetn of Specular gloss of non metallic paints films with colors at 20°,60° and 85°;
GB/T 9761 Paints and Varnishes – Visual comparisons of the color of paints;
GB/T 10125 Corrosion tests in artifical atmospheres – salt spray tests;
GB/T 11186.2 Methods for measuring the color of paint films – Part 2: Colour measurement;
GB/T 11186.3 Methods for measuring the color of paint films – Part 3: Calculation of colur differences;
GB/T 1658 Vulcanised Rubber – Test method of resistance to artificial weathering (fluerescent UV lamp)
GB/T 20975 (all Parts) Chemical analysis methods of aluminium and aluminium alloys
JC/T 480 Unslaked Lime for architecture
Contents of GB 5237.4-2008
Contents
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Requirements
5 Testing Methods
6 Inspection Rule
7 Marking, Packing, Transport and Storage
8 Content of Contract (or Order)
Appendix A (Normative) Method of Falling Sand Test
Appendix B (Normative) Solvent-resistance Test
