1 Scope
This part specifies the requirements, test methods, inspection rules, marking, packaging, transportation and storage as well as contract (or order) contents of wrought aluminium alloy extruded PVDF coating profiles (electrostatic spraying) for architecture.
This part is applicable to wrought aluminium alloy extruded profiles for architecture taking PVDF paint as coating (hereinafter referred to as profiles).
Other aluminum alloy manufactured lumber of the same application and surface treatment mode may be implemented by making reference to this part.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this part. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
GB/T 228-2002 Metallic Materials - Tensile Testing at Ambient Temperature
GB/T 1732 Determination of Impact Resistance of Film
GB/T 1740 Determination of Resistance to Heat and Humidity of Paint Films
GB/T 1766 Paints and Varnishes - Rating Schemes of Degradation of Coats
GB/T 1865-1997 Paints and Varnishes - Artificial Weathering and Exposure to artificial Radiation - Filtered Xenon - Arc Radiation
GB/T 3199 Wrought Aluminium and Aluminium Alloy Products – Packing, Marking, Transporting and Storing
GB/T 4957 Non-conductive Coatings on Non-magnetic Basis Metals - Measurement of Coating Thickness - Eddy Current
GB 5237.1 Wrought Aluminium Alloy Extruded Profiles for Architecture - Part 1: Mill Finish Profiles
GB 5237.4-2008 Wrought Aluminium Alloy Extruded Profiles for Architecture - Part 4: Powder Coating Profiles
GB/T 6461 Methods for Corrosion Testing of Metallic and Other Inorganic Coatings on Metallic Substrates - Rating of Test Specimens and Manufactured Articles Subjected to Corrosion Tests
GB/T 6682 Water for Analytical Laboratory Use - Specification and Test Methods
GB/T 6739 Paints and Varnishes - Determination of Film Hardness by Pencil Test
GB/T 8013. 3-2007 Anodic Oxide Coatings and Organic Polymer Coatings on Aluminium and Its Alloys - Part 3: Organic Polymer Coatings
GB/T 9276 Methods of Exposure to Natural Weathering of Coating
GB/T 9286 Paints and Varnishes - Cross Cut Test for Films
GB/T 9754 Paints and Varnishes - Determination of Specular Gloss of Non-metallic Paint Films at 20°, 60° and 85°
GB/T 9761 Paints and Varnishes - Visual Comparison of the Colour of Paints
GB/T 10125 Corrosion Tests in Artificial Atmospheres - Salt Spray Tests
GB/T 11186.2 Methods for Measuring the Colour of Paint Films; Part 2: Colour Measurement
GB/T 11186.3 Methods for Measuring the Colour of Paint Films; Part 3: Calculation of Colour Differences
GB/T 16585 Rubber, Vulcanized - Test Method of Resistance to Artificial Weathering (Fluorescent UV Lamp)
GB/T 20975 Chemical Analysis Methods of Aluminium and Aluminium Alloys (All Parts)
JC/T 480 Quicklime Powder Intended to Be Used in Construction
Contents
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Requirements
5 Test Methods
6 Inspection Rules
7 Marking, Packaging, Transportation and Storage
8 Contract (or Order) Contents
1 Scope
This part specifies the requirements, test methods, inspection rules, marking, packaging, transportation and storage as well as contract (or order) contents of wrought aluminium alloy extruded PVDF coating profiles (electrostatic spraying) for architecture.
This part is applicable to wrought aluminium alloy extruded profiles for architecture taking PVDF paint as coating (hereinafter referred to as profiles).
Other aluminum alloy manufactured lumber of the same application and surface treatment mode may be implemented by making reference to this part.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this part. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
GB/T 228-2002 Metallic Materials - Tensile Testing at Ambient Temperature
GB/T 1732 Determination of Impact Resistance of Film
GB/T 1740 Determination of Resistance to Heat and Humidity of Paint Films
GB/T 1766 Paints and Varnishes - Rating Schemes of Degradation of Coats
GB/T 1865-1997 Paints and Varnishes - Artificial Weathering and Exposure to artificial Radiation - Filtered Xenon - Arc Radiation
GB/T 3199 Wrought Aluminium and Aluminium Alloy Products – Packing, Marking, Transporting and Storing
GB/T 4957 Non-conductive Coatings on Non-magnetic Basis Metals - Measurement of Coating Thickness - Eddy Current
GB 5237.1 Wrought Aluminium Alloy Extruded Profiles for Architecture - Part 1: Mill Finish Profiles
GB 5237.4-2008 Wrought Aluminium Alloy Extruded Profiles for Architecture - Part 4: Powder Coating Profiles
GB/T 6461 Methods for Corrosion Testing of Metallic and Other Inorganic Coatings on Metallic Substrates - Rating of Test Specimens and Manufactured Articles Subjected to Corrosion Tests
GB/T 6682 Water for Analytical Laboratory Use - Specification and Test Methods
GB/T 6739 Paints and Varnishes - Determination of Film Hardness by Pencil Test
GB/T 8013. 3-2007 Anodic Oxide Coatings and Organic Polymer Coatings on Aluminium and Its Alloys - Part 3: Organic Polymer Coatings
GB/T 9276 Methods of Exposure to Natural Weathering of Coating
GB/T 9286 Paints and Varnishes - Cross Cut Test for Films
GB/T 9754 Paints and Varnishes - Determination of Specular Gloss of Non-metallic Paint Films at 20°, 60° and 85°
GB/T 9761 Paints and Varnishes - Visual Comparison of the Colour of Paints
GB/T 10125 Corrosion Tests in Artificial Atmospheres - Salt Spray Tests
GB/T 11186.2 Methods for Measuring the Colour of Paint Films; Part 2: Colour Measurement
GB/T 11186.3 Methods for Measuring the Colour of Paint Films; Part 3: Calculation of Colour Differences
GB/T 16585 Rubber, Vulcanized - Test Method of Resistance to Artificial Weathering (Fluorescent UV Lamp)
GB/T 20975 Chemical Analysis Methods of Aluminium and Aluminium Alloys (All Parts)
JC/T 480 Quicklime Powder Intended to Be Used in Construction
Contents of GB 5237.5-2008
Contents
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Requirements
5 Test Methods
6 Inspection Rules
7 Marking, Packaging, Transportation and Storage
8 Contract (or Order) Contents
