Detail of GB/T 24601-2009

Introduction of GB/T 24601-2009

1 Scope This standard specifies the terms and definitions, classification and labelling, requirements, test methods, inspection rules, as well as marking, packaging, transportation and storage of building hardware for windows - tilt and turn hardware system. It is applicable to the tilt and turn hardware system and turn and tilt hardware system for the tilt and turn window of building. 2 Normative Reference The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. GB/T 700 Carbon Structure Steel GB/T 905 Dimension, Shape, Weight and Tolerance for Cold-drawn Round, Square and Hexagonal Steels GB/T 2828.1 Sampling Procedures for Inspection by Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection GB/T 3280 Cold Rolled Stainless Steel Plate Sheet and Strip GB/T 4232 Stainless Steel Wire for Cold Heading and Cold Forging GB 5237.1 Wrought Aluminium Alloy Extruded Profiles for Architecture - Part 1: Mill Finish Profiles GB 5237.2 Wrought Aluminium Alloy Extruded Profiles for Architecture - Part 2: Anodized Profiles GB 5237.3 Wrought Aluminium Alloy Extruded Profiles for Architecture - Part 3: Electrophoretic Coating Profiles GB 5237.4 Wrought Aluminium Alloy Extruded Profiles for Architecture - Part 4 : Powder Coating Profiles GB 5237.5 Wrought Aluminium Alloy Extruded Profiles for Architecture - Part 5 : PVDF Coating Profiles GB/T 5823 Doors and Windows for Building - Terminology GB/T 6465-2008 Metallic and other Non-organic Coatings - Corrodkote Corrosion Test (CORR Test) GB/T 9158 Mechanical Test Methods for Windows GB/T 9799-1997 Metallic Coatings - Electroplated Coatings of Zinc on Iron or Steel GB/T 10125-1997 Corrosion Tests in Artificial Atmospheres - Salt Spray Tests GB/T 11253 Cold-rolled Sheets and Strips of Carbon Structural Steels GB/T 13818 Die Casting Zinc Alloys GB/T 14436 General Principles of Industrial Product Guarantee Documents GB/T 15115 Die Casting Aluminium Alloys JG/T 212-2007 Building Hardware for Windows and Doors - General Requirements HG/T 2233 Copolymerized Formaldehyde Resins 3 Terms and Definitions For the purposes of this document, the terms and definitions given in GB/T 5823, JG/T 212-2007 and the following apply. 3.1

Contents of GB/T 24601-2009

Foreword i 1 Scope 2 Normative Reference 3 Terms and Definitions 4 Classification and Labelling 5 Requirements 6 Test Methods 7 Inspection Rules 8 Marking, Packaging, Transportation and Storage Annex A (Informative) Basic Configuration of Building Hardware for Windows - Tilt and Turn Hardware System Annex B (Normative) Requirements for Test Simulated Window and Testing Record