1.1 Test conditions for measuring the tensile properties of less than 1mm thick plastic films or sheets are specified in this part of GB/T 1040, on the basis of Part 1.
Note: more than 1mm thick sheet materials are specified in GB/T 1040.2.
1.2 See 1.2 in GB/T 1040.1-2006.
1.3 This part is usually not applicable to measure the tensile properties of the following materials:
a) Polyfoam;
b) Fiber reinforced plastics.
1.4 See 1.5 in GB/T 1040.1-2006.
1 Scope 2 Normative references 3 Principles 4 Definitions 5 Equipments 6 Samples 7 Sample quantities 8 State adjustment 9 Testing procedures 10 Result calculation and presentation 11 Precision 12 Test report
1.1 Test conditions for measuring the tensile properties of less than 1mm thick plastic films or sheets are specified in this part of GB/T 1040, on the basis of Part 1.
Note: more than 1mm thick sheet materials are specified in GB/T 1040.2.
1.2 See 1.2 in GB/T 1040.1-2006.
1.3 This part is usually not applicable to measure the tensile properties of the following materials:
a) Polyfoam;
b) Fiber reinforced plastics.
1.4 See 1.5 in GB/T 1040.1-2006.
Contents of GB/T 1040.3-2006
1 Scope
2 Normative references
3 Principles
4 Definitions
5 Equipments
6 Samples
7 Sample quantities
8 State adjustment
9 Testing procedures
10 Result calculation and presentation
11 Precision
12 Test report
