Specifications for copper mould plates of continuous casting
1 Scope
This standard specifies the requirements, test methods, inspection rules and marking, packaging, transportation, storage and contract (or order) contents of copper mould plates of continuous casting.
This standard is applicable to copper-chromium-zirconium alloy and copper-silver alloy plates for continuous casting and copper alloy mould plates with electroplated coatings of nickel-iron, nickel-cobalt, cobalt-nickel and nickel.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.
GB/T 223.20 Methods for chemical analysis of iron steel and alloy - The Potentiometric titration method for the determination of cobalt content
GB/T 223.73 Iron, steel and alloy - Determination of iron contents - Titanium trichloride-potassium dichromate titration method
GB/T 223.82 Steel and iron - Determination of hydrogen content - Inert gas impulse fusion heat conductivity method
GB/T 228-2002 Metallic materials - Tensile testing at ambient temperature (ISO 6892:1998, EQV)
GB/T 231.1 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:1999, EQV)
GB/T 351 Metallic materials - Resistivity measurement method (IEC 468:1974, EQV)
GB/T 1804-2000 General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989, EQV)
GB/T 3651 Measuring method for thermal conductivity of metal at high temperature
GB/T 4338 Metallic materials - Tensile testing at elevated temperature (ISO 783:1999, MOD)
GB/T 4339 Test methods for thermal expansion characteristic parameters of metallic materials (ASTM E 228:2006, MOD)
GB/T 4340.1 Metallic materials - Vickers hardness test - Part 1: Test method (EQV ISO 6507-1:1997)
GB/T 4956 Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:1982, IDT)
GB/T 5121 (all parts) Methods for chemical analysis of copper and copper alloys
GB/T 5270 Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion (ISO 2819:1980, IDT)
GB/T 8888 Wrought Heavy Non-ferrous Metal Products - Packing, Marking, Transporting and Storing
GB/T 10610 Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996, IDT)
GB/T 12332 Metallic coatings - Electroplated coatings of nickel for engineering purposes (ISO 4526:2004,IDT)
GB/T 12611 Technical requirements of quality control for metal parts to be coated
GB/T 21933.1 Ferronickel - Determination of nickel content - The dimethylglyoxime gravimetric method (ISO 6352:1985, IDT)
GB/T 22315 Metallic materials - Determination of modulus of elasticity and Poisson's ratio (ASTM E 111-04, NEQ, ASTM E 1875-00)
JB/T 10061 Commonly used specification for A-mode ultrasonic flaw detector using pulse echo technique
3 Requirements
3.1 Product classification
3.1.1 Classification of copper mould plates
3.1.1.1 By cross-section shape of continuous casting billets, copper mould plates of continuous casting may be classified into: copper mould plates for plate billets, copper mould plates for rectangular billets, copper mould plates for shaped billets and copper mould plates for thin plate billets, as shown in Figure 1.
3.1.1.2 By structural form (Figure 2), copper mould plates of continuous casting may be classified into: copper mould plate with wide edge on inner-arc side, copper mould plate with wide edge on outer-arc side, copper mould plates with narrow edge on left side and copper mould plates with narrow edge on right side. The copper mould plates with wide edge on inner-arc side and those with wide edge on outer-arc side may have the same structure, which are called wide edged copper mould plates; the copper mould plates with narrow edge on left side and those with narrow edge on right side may have the same structure, which are called narrow edged copper mould plates.
Foreword II
1 Scope
2 Normative references
3 Requirements
4 Test methods
5 Inspection rules
6 Packaging, marking, transportation, storage and quality certificate
7 Contract (or purchase order) contents
Annex A (Normative) Requirements for ultrasonic flaw detection of matrix material for copper mould plates of continuous casting
Annex B (Normative) Requirements for ultrasonic flaw detection of electroplated coating for copper mould plates of continuous casting
Specifications for copper mould plates of continuous casting
1 Scope
This standard specifies the requirements, test methods, inspection rules and marking, packaging, transportation, storage and contract (or order) contents of copper mould plates of continuous casting.
This standard is applicable to copper-chromium-zirconium alloy and copper-silver alloy plates for continuous casting and copper alloy mould plates with electroplated coatings of nickel-iron, nickel-cobalt, cobalt-nickel and nickel.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.
GB/T 223.20 Methods for chemical analysis of iron steel and alloy - The Potentiometric titration method for the determination of cobalt content
GB/T 223.73 Iron, steel and alloy - Determination of iron contents - Titanium trichloride-potassium dichromate titration method
GB/T 223.82 Steel and iron - Determination of hydrogen content - Inert gas impulse fusion heat conductivity method
GB/T 228-2002 Metallic materials - Tensile testing at ambient temperature (ISO 6892:1998, EQV)
GB/T 231.1 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:1999, EQV)
GB/T 351 Metallic materials - Resistivity measurement method (IEC 468:1974, EQV)
GB/T 1804-2000 General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989, EQV)
GB/T 3651 Measuring method for thermal conductivity of metal at high temperature
GB/T 4338 Metallic materials - Tensile testing at elevated temperature (ISO 783:1999, MOD)
GB/T 4339 Test methods for thermal expansion characteristic parameters of metallic materials (ASTM E 228:2006, MOD)
GB/T 4340.1 Metallic materials - Vickers hardness test - Part 1: Test method (EQV ISO 6507-1:1997)
GB/T 4956 Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:1982, IDT)
GB/T 5121 (all parts) Methods for chemical analysis of copper and copper alloys
GB/T 5270 Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion (ISO 2819:1980, IDT)
GB/T 8888 Wrought Heavy Non-ferrous Metal Products - Packing, Marking, Transporting and Storing
GB/T 10610 Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996, IDT)
GB/T 12332 Metallic coatings - Electroplated coatings of nickel for engineering purposes (ISO 4526:2004,IDT)
GB/T 12611 Technical requirements of quality control for metal parts to be coated
GB/T 21933.1 Ferronickel - Determination of nickel content - The dimethylglyoxime gravimetric method (ISO 6352:1985, IDT)
GB/T 22315 Metallic materials - Determination of modulus of elasticity and Poisson's ratio (ASTM E 111-04, NEQ, ASTM E 1875-00)
JB/T 10061 Commonly used specification for A-mode ultrasonic flaw detector using pulse echo technique
3 Requirements
3.1 Product classification
3.1.1 Classification of copper mould plates
3.1.1.1 By cross-section shape of continuous casting billets, copper mould plates of continuous casting may be classified into: copper mould plates for plate billets, copper mould plates for rectangular billets, copper mould plates for shaped billets and copper mould plates for thin plate billets, as shown in Figure 1.
3.1.1.2 By structural form (Figure 2), copper mould plates of continuous casting may be classified into: copper mould plate with wide edge on inner-arc side, copper mould plate with wide edge on outer-arc side, copper mould plates with narrow edge on left side and copper mould plates with narrow edge on right side. The copper mould plates with wide edge on inner-arc side and those with wide edge on outer-arc side may have the same structure, which are called wide edged copper mould plates; the copper mould plates with narrow edge on left side and those with narrow edge on right side may have the same structure, which are called narrow edged copper mould plates.
Contents of GB/T 26025-2010
Foreword II
1 Scope
2 Normative references
3 Requirements
4 Test methods
5 Inspection rules
6 Packaging, marking, transportation, storage and quality certificate
7 Contract (or purchase order) contents
Annex A (Normative) Requirements for ultrasonic flaw detection of matrix material for copper mould plates of continuous casting
Annex B (Normative) Requirements for ultrasonic flaw detection of electroplated coating for copper mould plates of continuous casting