GB/T 2624.3-2006 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (English Version)
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles
1 Scope
This part of GB/T 2624 specifies the geometry and method of use (installation and operating conditions) of nozzles and Venturi nozzles when they are inserted in a conduit running full to determine the flowrate of the fluid flowing in the conduit.
This part of GB/T 2624 also provides background information for calculating the flowrate and is applicable in conjunction with the requirements given in GB/T 2624.1.
This part of GB/T 2624 is applicable to nozzles and Venturi nozzles in which the flow remains subsonic throughout the measuring section and where the fluid can be considered as single-phase. In addition, each of the devices can only be used within specified limits of pipe size and Reynolds number. It is not applicable to the measurement of pulsating flow. It does not cover the use of nozzles and Venturi nozzles in pipe sizes less than 50 mm or more than 630 mm, or where the pipe Reynolds numbers are below 10 000.
This part of GB/T 2624 deals with
a) two types of standard nozzles:
1) the ISA 1932 nozzle;
2) the long radius nozzle5);
b) the Venturi nozzle.
The two types of standard nozzle are fundamentally different and are described separately in this part. The Venturi nozzle has the same upstream face as the ISA 1932 nozzle, but has a divergent section and, therefore, a different location for the downstream pressure tappings, and is described separately.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of GB/T 2624. For dated references, subsequent amendments
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principles of the method of measurement and computation
5 Nozzles and Venturi nozzles
6 Installation requirements
Annex A (informative) Tables of discharge coefficients and expansibility [expansion] factors
Bibliography
GB/T 2624.3-2006 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (English Version)
Standard No.
GB/T 2624.3-2006
Status
superseded
Language
English
File Format
PDF
Word Count
13000 words
Price(USD)
320.0
Implemented on
2007-7-1
Delivery
via email in 1 business day
Detail of GB/T 2624.3-2006
Standard No.
GB/T 2624.3-2006
English Name
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles
1 Scope
This part of GB/T 2624 specifies the geometry and method of use (installation and operating conditions) of nozzles and Venturi nozzles when they are inserted in a conduit running full to determine the flowrate of the fluid flowing in the conduit.
This part of GB/T 2624 also provides background information for calculating the flowrate and is applicable in conjunction with the requirements given in GB/T 2624.1.
This part of GB/T 2624 is applicable to nozzles and Venturi nozzles in which the flow remains subsonic throughout the measuring section and where the fluid can be considered as single-phase. In addition, each of the devices can only be used within specified limits of pipe size and Reynolds number. It is not applicable to the measurement of pulsating flow. It does not cover the use of nozzles and Venturi nozzles in pipe sizes less than 50 mm or more than 630 mm, or where the pipe Reynolds numbers are below 10 000.
This part of GB/T 2624 deals with
a) two types of standard nozzles:
1) the ISA 1932 nozzle;
2) the long radius nozzle5);
b) the Venturi nozzle.
The two types of standard nozzle are fundamentally different and are described separately in this part. The Venturi nozzle has the same upstream face as the ISA 1932 nozzle, but has a divergent section and, therefore, a different location for the downstream pressure tappings, and is described separately.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of GB/T 2624. For dated references, subsequent amendments
Contents of GB/T 2624.3-2006
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principles of the method of measurement and computation
5 Nozzles and Venturi nozzles
6 Installation requirements
Annex A (informative) Tables of discharge coefficients and expansibility [expansion] factors
Bibliography