Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by the Ministry of Industry and Information Technology of the People's Republic of China.
This standard is under the jurisdiction of the National Technical Committee of Auto Standardization (SAC/TC 114).
Coding regulation for automotive traction battery
1 Scope
This standard specifies the objects, code structure composition, code structure representation method and data carrier of automotive traction battery code.
This standard is applicable to automotive traction batteries, super capacitors and other rechargeable energy storage devices.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 15425 Bar code for commodity - 128 bar code
GB/T 18284 QR code
GB/T 18347 Code 128
GB/T 19596 Terminology of electric vehicles
ISO/IEC 16022 Information technology - Automatic identification and data capture techniques - Data matrix bar code symbology specification
3 Terms and definitions
For the purpose of this standard, the terms and definitions specified in GB/T 19596 as well as the followings apply.
3.1
traction battery code
an identification code composed of a set of numbers and English letters with certain information meaning, representing the main attribute and uniqueness of traction battery
4 Coding
4.1 Coding objects
The coding objects are automotive traction battery pack, battery module and battery monomer as well as those in cascade utilization; moreover, correspondence shall be established for all objects mentioned above.
4.2 Code structure composition
The code structure consists of two parts, i.e., design information and production information, as detailed in Table 1 and Table 2 respectively. The two parts may be coded respectively or in combination.
The code structure is also applicable to the traction battery products in cascade utilization, for which, recoding shall be conducted according to coding rules, and the original code shall be remained. During the coding, traceability information code of the extended structure l is unavailable.
Table 1 Code structure of the first part
Basic structure Extended structure 1 Meaning
X1 X2 X3 X4 X5 X6 X7 X8 X9 X10 X11 X12 X13 X14
X1 X2 X3 Manufacturer code
X4 Product type code
X5 Battery type code
X6 X7 Specification code
X8 X9 X10 X11 X12 X13 X14 Traceability information code
Table 2 Code structure of the second part
Basic structure Extended structure 2 Meaning
X15 X16 X17 X18 X19 X20 X21 X22 X23 X24 X25 X26
Manufacturing date code Manufacturing date code
X18 X19 X20 X21 X22 X23 X24 Serial number
X25 X26 Cascade utilization code
4.3 Code structure representation method
4.3.1 Manufacturer code
Manufacturers include production manufacturers, cascade utilization manufacturers and importers. The manufacturer code is represented by three digits of English capital letters, numbers 0 to 9, or a combination of letters and numbers, which are uniformly distributed by the industry administration department.
4.3.2 Product type code
The traction battery pack, battery module and battery monomer are represented by capital letters P, M and C respectively.
4.3.3 Battery type code
The battery type code is represented by the battery material type, i.e., an English capital letter, as shown in Table 3. For multi-component mixed material system, coding is conducted based on the component with the maximum content; where there are two or more components with the same content, the one with inferior safety shall be adopted for coding.
Table 3 Battery type code
Battery type Code
Ni-mh battery A
Lithium iron phosphate battery B
lithium-ion manganese oxide battery C
Cobalt based lithium battery D
Ternary material battery E
Super capacitor F
Lithium titanate battery G
Others Z
4.3.4 Specification code
The specification code is represented by two digits of English capital letters, numbers 0~9 or a combination of letters and numbers. It is defined by the enterprise and refers to different product specifications and models. The enterprise needs to record the customized specification code.
4.3.5 Traceability information code
The traceability information code is represented by seven digits of English capital letters, numbers 0~9, or a combination of letters and numbers. It is defined by the enterprise. Traceability information code is necessary for new traction battery products while unavailable for those in cascade utilization. The enterprise needs to record the customized traceability information code. It is not recommended to use letters that are easy to be confused with numbers, such as O, I, Q, S and Z.
4.3.6 Manufacturing date code
The manufacturing date is represented by three digits of English capital letters and numbers. Where, the first digit represents the year, of which, the code is used according to Table 4 (in 30-year cycling); the second digit represents the month expressed in hexadecimal values; the third digit represents the date used in accordance with Table 5.
Foreword I 1 Scope 2 Normative references 3 Terms and definitions 4 Coding 5 Data carrier Annex A (Informative) Coding examples
Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by the Ministry of Industry and Information Technology of the People's Republic of China.
This standard is under the jurisdiction of the National Technical Committee of Auto Standardization (SAC/TC 114).
Coding regulation for automotive traction battery
1 Scope
This standard specifies the objects, code structure composition, code structure representation method and data carrier of automotive traction battery code.
This standard is applicable to automotive traction batteries, super capacitors and other rechargeable energy storage devices.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 15425 Bar code for commodity - 128 bar code
GB/T 18284 QR code
GB/T 18347 Code 128
GB/T 19596 Terminology of electric vehicles
ISO/IEC 16022 Information technology - Automatic identification and data capture techniques - Data matrix bar code symbology specification
3 Terms and definitions
For the purpose of this standard, the terms and definitions specified in GB/T 19596 as well as the followings apply.
3.1
traction battery code
an identification code composed of a set of numbers and English letters with certain information meaning, representing the main attribute and uniqueness of traction battery
4 Coding
4.1 Coding objects
The coding objects are automotive traction battery pack, battery module and battery monomer as well as those in cascade utilization; moreover, correspondence shall be established for all objects mentioned above.
4.2 Code structure composition
The code structure consists of two parts, i.e., design information and production information, as detailed in Table 1 and Table 2 respectively. The two parts may be coded respectively or in combination.
The code structure is also applicable to the traction battery products in cascade utilization, for which, recoding shall be conducted according to coding rules, and the original code shall be remained. During the coding, traceability information code of the extended structure l is unavailable.
Table 1 Code structure of the first part
Basic structure Extended structure 1 Meaning
X1 X2 X3 X4 X5 X6 X7 X8 X9 X10 X11 X12 X13 X14
X1 X2 X3 Manufacturer code
X4 Product type code
X5 Battery type code
X6 X7 Specification code
X8 X9 X10 X11 X12 X13 X14 Traceability information code
Table 2 Code structure of the second part
Basic structure Extended structure 2 Meaning
X15 X16 X17 X18 X19 X20 X21 X22 X23 X24 X25 X26
Manufacturing date code Manufacturing date code
X18 X19 X20 X21 X22 X23 X24 Serial number
X25 X26 Cascade utilization code
4.3 Code structure representation method
4.3.1 Manufacturer code
Manufacturers include production manufacturers, cascade utilization manufacturers and importers. The manufacturer code is represented by three digits of English capital letters, numbers 0 to 9, or a combination of letters and numbers, which are uniformly distributed by the industry administration department.
4.3.2 Product type code
The traction battery pack, battery module and battery monomer are represented by capital letters P, M and C respectively.
4.3.3 Battery type code
The battery type code is represented by the battery material type, i.e., an English capital letter, as shown in Table 3. For multi-component mixed material system, coding is conducted based on the component with the maximum content; where there are two or more components with the same content, the one with inferior safety shall be adopted for coding.
Table 3 Battery type code
Battery type Code
Ni-mh battery A
Lithium iron phosphate battery B
lithium-ion manganese oxide battery C
Cobalt based lithium battery D
Ternary material battery E
Super capacitor F
Lithium titanate battery G
Others Z
4.3.4 Specification code
The specification code is represented by two digits of English capital letters, numbers 0~9 or a combination of letters and numbers. It is defined by the enterprise and refers to different product specifications and models. The enterprise needs to record the customized specification code.
4.3.5 Traceability information code
The traceability information code is represented by seven digits of English capital letters, numbers 0~9, or a combination of letters and numbers. It is defined by the enterprise. Traceability information code is necessary for new traction battery products while unavailable for those in cascade utilization. The enterprise needs to record the customized traceability information code. It is not recommended to use letters that are easy to be confused with numbers, such as O, I, Q, S and Z.
4.3.6 Manufacturing date code
The manufacturing date is represented by three digits of English capital letters and numbers. Where, the first digit represents the year, of which, the code is used according to Table 4 (in 30-year cycling); the second digit represents the month expressed in hexadecimal values; the third digit represents the date used in accordance with Table 5.
Contents of GB/T 34014-2017
Foreword I
1 Scope
2 Normative references
3 Terms and definitions
4 Coding
5 Data carrier
Annex A (Informative) Coding examples
