Detail of GB/T 713.5-2023

Introduction of GB/T 713.5-2023

GB/T 713.5-2023 Steel plate, sheet and strip for pressure equipment - Part 5: High manganese steel with specified low temperature properties 1 Scope This document specifies the designation representation, order information, dimension, shape, weight, technical requirements, test methods, inspection rules, packaging, marking and quality certificate of high manganese steel with specified low temperature properties for pressure equipment. This document is applicable to high manganese steel plates with specified low temperature properties (hereinafter referred to as steel plates) with a temperature not lower than -196°C and a thickness of 5mm to 60mm. 2 Normative references The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies. GB/T 223.5 Steel and iron - Determination of acid-soluble silicon and total silicon content - Reduced molybdosilicate spectrophotometric method GB/T 223.9 Iron, steel and alloy - Determination of aluminum content - Chrome azurol S photometric method GB/T 223.11 Iron steel and alloy - Determination of chromium content - Visual titration or potentiometric titration method GB/T 223.17 Methods for chemical analysis of iron, steel and alloy - The diantipyrylmethane photometric method for the determination of titanium content GB/T 223.18 Methods for chemical analysis of iron, steel and alloy - The sodium thiosulfate separation iodimetric method for the determination of cupper content GB/T 223.23 Iron, steel and alloy - Determination of nickel content - The dimethylglyoxime spectrophotometric method GB/T 223.26 Iron, steel and alloy - Determination of molybdenum content - The thiocyanate spectrophotometric method GB/T 223.36 Methods for chemical analysis of iron, steel and alloy - The neutral titration method for the determination of nitrogen content after distillation separation GB/T 223.40 Iron, steel and alloy - Determination of niobium content by the sulphochlorophenol S spectrophotometric method GB/T 223.59 Iron, steel and alloy - Determination of phosphorus content - Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method GB/T 223.63 Methods for chemical analysis of iron, steel and alloy - The sodium (potassium) periodate photometric method for the determination of manganese content GB/T 223.75 Iron, steel and alloy - Determination of boron content - Methanol distillation-curcumin photometric method GB/T 223.76 Methods for chemical analysis of iron, steel and alloy - The flame atomic absorption spectrometric method for the determination of vanadium content GB/T 223.85 Steel and iron - Determination of sulfur content - Infrared absorption method after combustion in an induction furnace GB/T 223.86 Steel, iron and alloy - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace GB/T 228.1 Metallic materials - Tensile testing - Part 1: Method of test at room temperature GB/T 229 Metallic materials - Charpy pendulum impact test method GB/T 232 Metallic materials - Bend test GB/T 713.1 Steel plate, sheet and strip for pressure equipment - Part 1: General requirements GB/T 2975 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing GB/T 4336 Carbon and low-alloy steel - Determination of multi-element contents - Spark discharge atomic emission spectrometric method (routine method) GB/T 20066 Steel and iron - Sampling and preparation of samples for the determination of chemical composition GB/T 20123 Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method) GB/T 20125 Low-alloy steel - Determination of multi-element contents - Inductively coupled plasma atomic emission spectrometric method NB/T 47013.3 Nondestructive testing of pressure equipment - Part 3: Ultrasonic testing 3 Terms and definitions For the purposes of this document, the terms and definitions given in GB/T 713.1 apply. 4 Designation expression The designation of steel consists of three parts: the Chinese phonetic initials of "Qu" for yield strength, the specified minimum yield strength (specified plastic extension strength), the Chinese phonetic initials of "Gao" and "Meng" for high manganese and the Chinese phonetic initials of "Di" and "Rong" for low-temperature vessels. Example: Q400GMDR. Where,

Contents of GB/T 713.5-2023

Foreword i Introduction ii 1 Scope 2 Normative references 3 Terms and definitions 4 Designation expression 5 Order information 6 Dimension, shape and weight 7 Technical requirements 8 Test methods 9 Inspection rules 10 Packaging, marking and quality certification