This standard specifies the characteristics of slotted spring-type straight pins, made of steel or of austenitic or martensitic stainless steel, light duty with nominal diameter, d, from 2 mm to 50 mm inclusive.
Note: the nominal diameters have been chosen in such a way that pins may be fitted one into the other or combined with pins, heavy duty in accordance with GB/T 879.1.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below.
Foreword i ISO Foreword i 1 Scope 2 Normative references 3 Dimensions 4 Application 5 Technical conditions and normative references 6 Designation
1 Scope
This standard specifies the characteristics of slotted spring-type straight pins, made of steel or of austenitic or martensitic stainless steel, light duty with nominal diameter, d, from 2 mm to 50 mm inclusive.
Note: the nominal diameters have been chosen in such a way that pins may be fitted one into the other or combined with pins, heavy duty in accordance with GB/T 879.1.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below.
Contents of GB/T 879.2-2000
Foreword i
ISO Foreword i
1 Scope
2 Normative references
3 Dimensions
4 Application
5 Technical conditions and normative references
6 Designation
