This document specifies the technical requirements for plug-in (including extended-range) hybrid electric passenger cars.
This document is applicable to M1 hybrid electric vehicles with external charging and pure electric drive function.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 18352.6-2016 Limits and measurement methods for emissions from light-duty vehicles (CHINA 6)
GB 18384 Electric vehicles safety requirements
GB 19578 Fuel consumption limits for passenger cars
GB/T 19596 Terminology of electric vehicles
GB/T 19753 Test methods for energy consumption of light-duty hybrid electric vehicles
GB/T 20234 (All parts) Connection set of conductive charging for electric vehicles
GB/T 31498 The safety requirement of electric vehicle post crash
GB/T 34657.2 Interoperability test specifications of electric vehicle conductive charging—Part 2: Vehicle
GB 38031 Electric vehicles traction battery safety requirements
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 19596, GB 18352.6-2016 and the following apply.
3.1
plug-in hybrid electric passenger car
electric passenger car with plug-in charging function, which can run for certain mileage driven only by electricity
3.2
range extender
special device installed on the vehicle to increase the driving range of an electric vehicle
Note: The range extender in this document refers to the internal combustion engine generating set.
3.3
pure electric driving
vehicle is driven by the power supply motor, powered by the rechargeable electrical energy storage system (REESS), and the engine or range extender does not work
Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Requirements
1 Scope
This document specifies the technical requirements for plug-in (including extended-range) hybrid electric passenger cars.
This document is applicable to M1 hybrid electric vehicles with external charging and pure electric drive function.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 18352.6-2016 Limits and measurement methods for emissions from light-duty vehicles (CHINA 6)
GB 18384 Electric vehicles safety requirements
GB 19578 Fuel consumption limits for passenger cars
GB/T 19596 Terminology of electric vehicles
GB/T 19753 Test methods for energy consumption of light-duty hybrid electric vehicles
GB/T 20234 (All parts) Connection set of conductive charging for electric vehicles
GB/T 31498 The safety requirement of electric vehicle post crash
GB/T 34657.2 Interoperability test specifications of electric vehicle conductive charging—Part 2: Vehicle
GB 38031 Electric vehicles traction battery safety requirements
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 19596, GB 18352.6-2016 and the following apply.
3.1
plug-in hybrid electric passenger car
electric passenger car with plug-in charging function, which can run for certain mileage driven only by electricity
3.2
range extender
special device installed on the vehicle to increase the driving range of an electric vehicle
Note: The range extender in this document refers to the internal combustion engine generating set.
3.3
pure electric driving
vehicle is driven by the power supply motor, powered by the rechargeable electrical energy storage system (REESS), and the engine or range extender does not work
Contents of GB/T 32694-2021
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
