1 Scope
This standard specifies the terms and definitions, product classification, requirements, test methods, inspection rules, and marking, labelling, packaging, transportation and storage of case-lock.
This standard is applicable to the case-locks of all cases and bags of daily use.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
QB/T 2002.1-1994 Technical Conditions of Electroplated Layer of Leather Hardware Fittings
QB/T 3826 Corrosion-resistant Testing Method of the Metal Deposits and Conversion Coatings for the Light Industrial Products--Neutral Salt Spraying Test (NSS)
QB/T 3832 Evaluation of the Corrosion Test Results of the Metal Deposits for the Light Industrial Products
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Product Classification
5 Requirements
6 Test Methods
7 Inspection Rules
8 Marking, Packaging, Transportation and Storage
1 Scope
This standard specifies the terms and definitions, product classification, requirements, test methods, inspection rules, and marking, labelling, packaging, transportation and storage of case-lock.
This standard is applicable to the case-locks of all cases and bags of daily use.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
QB/T 2002.1-1994 Technical Conditions of Electroplated Layer of Leather Hardware Fittings
QB/T 3826 Corrosion-resistant Testing Method of the Metal Deposits and Conversion Coatings for the Light Industrial Products--Neutral Salt Spraying Test (NSS)
QB/T 3832 Evaluation of the Corrosion Test Results of the Metal Deposits for the Light Industrial Products
Contents of QB/T 1586.1-2010
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Product Classification
5 Requirements
6 Test Methods
7 Inspection Rules
8 Marking, Packaging, Transportation and Storage
