Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 3328-1997 Furniture - Main sizes of beds and the following main technical changes have been made with respect to GB/T 3328-1997:
——The clause - “Scope” is modified (see clause 1; clause 1 of 1997 edition);
——The definition of the bed surface is deleted and meanwhile the definition of the bed base is added (see 2.1; 2.1.1 of 1997 edition);
——The schematic diagrams for the main sizes of monolayer beds and bunk beds are modified (see 4.1; 3.1 of 1997 edition);
——The bed base length of monolayer bed is modified as: 1,900mm~2,220mm for inserted-mat style and 1,900mm~2,200mm for noninserted-mat style (see 4.1; 3.1 of 1997 edition);
——The bed base width is modified as: 700mm~1,200mm for single bed and 1,350mm~2,000mm for double bed; the height range of the bed base with a mattress placed on it is deleted; the height range of the bed base without a mattress placed on it is modified as ≤ 450mm (see 4.1; 3.1 of 1997 edition);
——The bed base length of bunk bed is modified as 1,900mm~2,020mm and the bed base width of bunk bed as 800mm~1,520mm (see 4.2; 3.2 of 1997 edition);
——The "Note: In case of special requirements or contract requirements, all sizes shall be noted in the contract by the supplier and the purchaser, and are not subject to this limitation” is added in a table (see 4.2; 3.2 of 1997 edition).
This standard was proposed by China National Light Industry Council.
This standard is under the jurisdiction of the National Technical Committee on Furnitures of Standardization Administration of China (SAC/TC 480).
This standard was firstly issued in 1982 and revised in 1997 for the first time.
Furniture - Main sizes of beds
1 Scope
This standard specifies the terms and definitions, codes and main sizes of beds.
This standard is applicable to the design and production of monolayer beds and bunk beds for adults; and it may also be referred to for that of other beds.
2 Terms and definitions
For the purposes of this standard, the following terms and definitions apply.
2.1
bed base
supporting structure for placement of a mattress or sleeping pad
2.2
clear height between bunks
distance between the bed base of lower bunk and the bed base bottom of upper bunk in a bunk bed
3 Code
See Table 1 for main size codes and descriptions of beds
Table 1 Main size codes and descriptions of beds
No. Code Code description
1 B1 Bed base width
2 L1 Bed base length
3 L2 Notch length in the safety railing plate
4 H1 Bed base height
5 H2 Bottom surface height
6 H3 Clear height between bunks
7 H4 Height of the safety railing plate
4 Main sizes
4.1 Main sizes of monolayer beds
See Figure 1, Table 2, and Figure 2 for the main sizes of monolayer beds.
Figure 1 Schematic diagram for main sizes of monolayer beds
Table 2 Main sizes of monolayer beds In: mm
Bed base length
L1 Bed base widtha
B1 Bed base height
H1
Inserted-mat style Noninserted-mat style Without a mattress or sleeping pad placed on it
1,900~2,220 1,900~2,200 Single bed 700~1,200 ≤450
Double bed 1,350~2,000
Note: In case of special requirements or contract requirements, all sizes shall be noted in the contract by the supplier and the purchaser, and are not subject to this limitation.
a The bed base width of beds of inserted-mat style shall be increased by 5~20 and see Figure 2 for the size schematic diagram.
Figure 2 Schematic diagram for the bed base sizes of beds of inserted-mat style
4.2 Main sizes of bunk beds
See Figure 3 and Table 3 for the main sizes of bunk beds.
Figure 3 Schematic diagram for main sizes of bunk beds
Foreword II
1 Scope
2 Terms and definitions
3 Code
4 Main sizes
Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 3328-1997 Furniture - Main sizes of beds and the following main technical changes have been made with respect to GB/T 3328-1997:
——The clause - “Scope” is modified (see clause 1; clause 1 of 1997 edition);
——The definition of the bed surface is deleted and meanwhile the definition of the bed base is added (see 2.1; 2.1.1 of 1997 edition);
——The schematic diagrams for the main sizes of monolayer beds and bunk beds are modified (see 4.1; 3.1 of 1997 edition);
——The bed base length of monolayer bed is modified as: 1,900mm~2,220mm for inserted-mat style and 1,900mm~2,200mm for noninserted-mat style (see 4.1; 3.1 of 1997 edition);
——The bed base width is modified as: 700mm~1,200mm for single bed and 1,350mm~2,000mm for double bed; the height range of the bed base with a mattress placed on it is deleted; the height range of the bed base without a mattress placed on it is modified as ≤ 450mm (see 4.1; 3.1 of 1997 edition);
——The bed base length of bunk bed is modified as 1,900mm~2,020mm and the bed base width of bunk bed as 800mm~1,520mm (see 4.2; 3.2 of 1997 edition);
——The "Note: In case of special requirements or contract requirements, all sizes shall be noted in the contract by the supplier and the purchaser, and are not subject to this limitation” is added in a table (see 4.2; 3.2 of 1997 edition).
This standard was proposed by China National Light Industry Council.
This standard is under the jurisdiction of the National Technical Committee on Furnitures of Standardization Administration of China (SAC/TC 480).
This standard was firstly issued in 1982 and revised in 1997 for the first time.
Furniture - Main sizes of beds
1 Scope
This standard specifies the terms and definitions, codes and main sizes of beds.
This standard is applicable to the design and production of monolayer beds and bunk beds for adults; and it may also be referred to for that of other beds.
2 Terms and definitions
For the purposes of this standard, the following terms and definitions apply.
2.1
bed base
supporting structure for placement of a mattress or sleeping pad
2.2
clear height between bunks
distance between the bed base of lower bunk and the bed base bottom of upper bunk in a bunk bed
3 Code
See Table 1 for main size codes and descriptions of beds
Table 1 Main size codes and descriptions of beds
No. Code Code description
1 B1 Bed base width
2 L1 Bed base length
3 L2 Notch length in the safety railing plate
4 H1 Bed base height
5 H2 Bottom surface height
6 H3 Clear height between bunks
7 H4 Height of the safety railing plate
4 Main sizes
4.1 Main sizes of monolayer beds
See Figure 1, Table 2, and Figure 2 for the main sizes of monolayer beds.
Figure 1 Schematic diagram for main sizes of monolayer beds
Table 2 Main sizes of monolayer beds In: mm
Bed base length
L1 Bed base widtha
B1 Bed base height
H1
Inserted-mat style Noninserted-mat style Without a mattress or sleeping pad placed on it
1,900~2,220 1,900~2,200 Single bed 700~1,200 ≤450
Double bed 1,350~2,000
Note: In case of special requirements or contract requirements, all sizes shall be noted in the contract by the supplier and the purchaser, and are not subject to this limitation.
a The bed base width of beds of inserted-mat style shall be increased by 5~20 and see Figure 2 for the size schematic diagram.
Figure 2 Schematic diagram for the bed base sizes of beds of inserted-mat style
4.2 Main sizes of bunk beds
See Figure 3 and Table 3 for the main sizes of bunk beds.
Figure 3 Schematic diagram for main sizes of bunk beds
Contents of GB/T 3328-2016
Foreword II
1 Scope
2 Terms and definitions
3 Code
4 Main sizes
