Standard No.:	CJ/T 186-2018
English Name:	Floor drain
Chinese Name:	地漏
Chinese Classification:	P42    Building water supply and draining engineering
Professional Classification:	CJ    Professional Standard - Urban Construction
ICS Classification:	91.140.80 91.140.80    Drainage systems 91.140.80
Issued by:	MOHURD
Issued on:	2018-06-12
Implemented on:	2018-12-1
Status:	valid
Superseding:	CJ/T 186-2003 Floor drain
Language:	English
File Format:	PDF
Word Count:	14500 words
Price(USD):	460.0
Delivery:	via email in 1 business day

Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative. This standard is developed in accordance with the rules given in GB/T 1.1-2009. This standard replaces CJ/T 186-2003 Floor drain. The following main technical changes have been made with respect to CJ/T 186-2003: ——The terms have been added, such as floor drain, anti-dried up floor drain, water injection floor drain, anti-siphon floor drain, special large flow floor drain, mechanical anti-dry unit, self-cleansing capacity, seal capacity and ratio of water seal; ——The technical requirements and detection methods for anti-dried up floor drain, water injection floor drain, anti-siphon floor drain and special large flow floor drain have been added; ——The minimum drainage discharge of floor drain has been adjusted; ——The technical requirements for minimum seal capacity and ratio of water seal of water seal floor drain have been added; ——The methods for testing the drainage discharge, self-cleansing capacity and water seal stability of floor drains have been modified; ——The original Annex C “Auxiliary verbs used in clause expression” has been changed as Annex C “Floor drain application conditions”. This standard was proposed by the Ministry of Housing and Urban-Rural Development of the People's Republic of China. This standard is under the jurisdiction of Technical Committee on Building Water Supply and Drainage Standardization Administration of the Ministry of Housing and Urban-Rural Development. The previous edition of this standard is as follows: ——CJ/T 186-2003. Floor drain 1 Scope This standard specifies the classification and model, materials, requirements, test methods, inspection rules, marking, packaging, transport and storage of floor drain. This standard is applicable to floor drains used in civil and industrial buildings. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 1176 Cast copper and copper alloy GB/T 2100 Corrosion-resistant steel castings for general applications GB/T 2406.2 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test GB/T 3420 Gray iron castings for pipe fittings GB/T 5836.2 Unplasticized poly (vinyl chloride)(PVC-U) fittings for soil and waste discharge inside buildings GB/T 7307 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads GB/T 8801 Test method for unplasticized polyvinyl chloride (PVC-U) fittings by falling GB/T 8802 Thermoplastics pipes and fitting - Determination of vicat softening temperature GB/T 9439 Grey iron castings GB/T 11379 Metallic coatings - Electroplated coatings of chromium for engineering purposes GB/T 12716 Pipe threads with the thread angle of 60 degrees where pressure-tight joints are made on threads GB/T 12772 Cast iron pipes, fittings and accessories with flexible joint sewerage for drainage GB/T 13819 Copper and copper alloy castings CJ/T 177 Work coupling type cast iron pipe and fittings for building drainage CJ/T 178 Fauceting cast iron pipes and fittings with flexible joint for building drainage CJ/T 250 High density polyethylene pipes and fittings for drainage inside buildings 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 floor drain device for discharging accumulated water on the ground or receiving drainage from appliances at the same time, which is composed of grate, body, discharge joint and other components 3.2 water seal water storage structure in floor drain for preventing harmful gases, etc., from escaping 3.3 straight floor drain floor drain with bottom discharge opening, with its body without water seal or other accessories 3.4 water seal floor drain refer in particular to floor drain with traps or other structural types of water seals inside, which meets the requirements of effective trap seal, minimum seal capacity and ratio of water seal 3.5 special type floor drain non-straight floor drain with one or more functions, such as anti-dried up floor drain, water injection floor drain, seal-type floor drain, grid-type floor drain, forbidden-spill floor drain, multiple-connection floor drain, side-drain floor drain, embedded floor drain, anti-siphon floor drain and special large flow floor drain 3.6 anti-dried up floor drain water seal floor drain with the function of preventing the water seal of floor drain from drying up (evaporation of water seal, etc.) 3.7 water injection floor drain floor drain capable of maintaining certain seal depth by injecting clear water into the trap via water injection controller 3.8 seal-type floor drain floor drain with seal cover which is a floor drain without water seal, and which is opened manually when drains and sealed when does not drain 3.9 grid-type floor drain floor drain with movable grid for intercepting sundries in water, which has two internal structures: that with water seal and that without water seal 3.10 forbidden-spill floor drain water seal floor drain with the function of preventing the waste water from overflowing the ground during discharge and preventing the waste water in the drainage system from overflowing back to the ground 3.11 multiple-connection floor drain water seal floor drain accepting the drainage from ground and, at the same time, from 1~2 appliances 3.12 side-drain floor drain floor drain without water seal with L-shaped grate, which is installed vertically and has the function of laterally receiving and discharging the accumulated water on the ground 3.13 embedded floor drain water seal floor drain directly installed in the cushion, with its outlet pipe not crossing the floor, which is also called directly embedded floor drain 3.14 anti-siphon floor drain water seal floor drain capable of preventing negative pressure suction and reducing siphon water seal loss 3.15 special large flow floor drain floor drain without water seal, with the floor drain grate opening area large and capable of accepting large drainage discharge 3.16 seal capacity water storage volume in the range below the water seal surface 3.17 mechanical anti-dry unit mechanical unit which is arranged in the floor drain body and has the functions of slowing down evaporation loss of water seal and preventing overflow, such as floating ball type or movable plate type anti-dry unit and magnetic tipping bucket anti-dry unit 3.18 grate component of floor drain, which is a cover with pore and installed on the floor drain surface 3.19 cover component of seal-type floor drain, which is a cover without pore and installed on the floor drain surface 3.20 adjustable segment component of floor drain, which is used to coordinate the height of grate surface with the floor surface 3.21 waterproof wing ring component of floor drain body, which is arranged at the periphery of the floor drain body so as to prevent water seepage at the contact part between the floor drain and the floor 3.22 seal depth vertical distance between the highest water level of water stored in floor drain and the lower opening of water seal 3.23 ratio of water seal ratio of free water surface areas between outlet channel end and inlet channel end of floor drain water seal 3.24 self-cleansing capacity capacity of preventing sundries from depositing of the internal structure of floor drain, which is generally detected based on the discharge rate of 100 small plastic balls under rated drainage discharge 4 Classification and model 4.1 Classification 4.1.1 The types shall be classified into straight type and special type according to the use function or structure form. 4.1.2 The specifications shall be expressed based on the nominal size of the discharge joint, including DN50, N75, DN100 and DN150. 4.1.3 The floor drains are named by use function or structure form. Such as straight floor drain, seal-type floor drain, grid-type floor drain, forbidden-spill floor drain, multiple-connection floor drain, side-drain floor drain, embedded floor drain, special large flow floor drain, anti-dried up floor drain, anti-siphon floor drain and water injection floor drain. 4.2 Model 4.2.1 Model shall be expressed based on specifications, with or without water seal, material, discharge joint form and connection mode.

Contents Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Classification and model 5 Materials 6 Requirements 7 Test methods 8 Inspection rules 9 Marking, packaging, transport and storage Annex A (Informative) Schematic diagrams for basic structures of floor drains Annex B (Normative) Floor drain inspection and test apparatus Annex C (Informative) Floor drain application conditions Bibliography