Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by China National Textile and Apparel Council.
This standard is under the jurisdiction of the Subcommittee on Knitwear of the National Technical Committee on Textiles of the Standardization Administration of China (SAC/TC 209/SC 6) and the National Technical Committee on Garments of Standardization Administration of China (SAC/TC 219).
Reversible Garments
1 Scope
This standard specifies the requirements, inspection methods, inspection rules, and marking, packaging, transportation and storage of reversible garments.
This standard is applicable to reversible garments produced with textile fabrics as raw materials.
This standard is not applicable to garments for infants aged 36 months and below.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 250 Textiles - Tests for Colour Fastness - Grey Scale for Assessing Change in Colour
GB/T 1335 (all parts) Standard Sizing Systems for Garments
GB/T 2910 (all parts) Textiles - Quantitative Chemical Analysis
GB/T 2912.1 Textiles - Determination of Formaldehyde - Part 1: Free and Hydrolized Formaldehyde (Water Extraction Method)
GB/T 3917.2 Textiles - Tear Properties of Fabrics - Part 2: Determination of Tear Force of Trouser-shaped Test Specimens (Single Tear Method)
GB/T 3920 Textiles - Tests for Colour Fastness - Colour Fastness to Rubbing
GB/T 3921-2008 Textiles - Tests for Colour Fastness - Colour Fastness to Washing with Soap or Soap and Soda
GB/T 3922 Textiles - Tests for Colour Fastness - Colour Fastness to Perspiration
GB/T 3923.1 Textiles - Tensile Properties of Fabrics - Part 1: Determination of Maximum Force and Elongation at Maximum Force Using the Strip Method
GB/T 4802.1-2008 Textiles - Determination of Fabric Propensity to Surface Fuzzing and to Pilling - Part 1: Circular Locus Method
GB/T 4802.3 Textiles - Determination of Fabric Propensity to Surface Fuzzing and to Pilling - Part 3: Pilling Box Method
GB/T 4841.3 Colour Cards of Standard Depths for Dyeing with Dyestuffs 2/1, 1/3, 1/6, 1/12, 1/25
GB/T 5296.4 Instructions for Use of Products of Consumer Interest - Part 4: Textiles and Apparel
GB/T 5711 Textiles - Tests for Colour Fastness - Colour Fastness to Drycleaning Using Perchloroethylene Solvent
GB/T 5713 Textiles - Tests for Colour Fastness - Colour Fastness to Water
GB/T 6411 A series of size of knitted underwear
GB/T 7573 Textiles - Determination of pH of Aqueous Extract
GB/T 7742.1 Textiles - Bursting Properties of Fabrics - Part 1: Hydraulic Method for Determination of Bursting Strength and Bursting Distension
GB/T 8170 Rules of Rounding Off for Numerical Values & Expression and Judgement of Limiting Values
GB/T 8427-2008 Textiles - Tests for Colour Fastness - Color Fastness to Artificial Light: Xenon Arc Fading Lamp Test
GB/T 8629-2001 Textiles - Domestic Washing and Drying Procedures for Textile Testing
GB/T 8630 Textiles - Determination of Dimensional Change in Washing and Drying
GB/T 14272 Down garments
GB/T 16988 Quantitative Determination for Mixtures of Special Animal Fibre and Wool
GB/T 17592 Textiles - Determination of the Banned Azo Colourants
GB 18383 General Technical Requirements for Products with Filling Materials
GB 18401 National General Safety Technical Code for Textile Products
GB/T 19976-2005 Textiles - Determination of Bursting Strength - Steel Ball Method
GB/T 21294 Testing Methods of Physical and Chemical Performance of Garments
GB/T 21295 Requirements of Physical and Chemical Performance of Garments
GB/T 26385-2011 Knitting Patchwork Clothing
GB/T 29862 Textiles - Identification of Fiber Content
GB/T 31127-2014 Textiles - Tests for Colour Fastness - Colour Fastness to Transfer in Joints
GB 31701 Safety Technical Code for Infants and Children Textile Products
GB/T 31907 Method of Garment Measurement
FZ/T 01026 Textiles - Quantitative Chemical Analysis - Quaternary Fibre Mixtures
FZ/T 01031-2016 Knitted Fabric and Elastic Woven Fabric - Determination of Maximum Force to Seam Rupture and Elongation - Grab Method
FZ/T 01057 (all parts) Test Method for Identification of Textile Fibers
FZ/T 01095 Textile - Test Method of Elastane Fibre Content
FZ/T 30003 Method for Quantitative Analysis of Ramie (Flax Hemp) Cotton Blended Textile - Micro Projection
FZ/T 73053 Knitted Down Garments
FZ/T 80002 Marking, Packaging, Transpiration and Storage for Garments
FZ/T 80004 Rule for Garments Delivery Inspection
FZ/T 80007.3-2006 Dry Wash Resistance Test Method for Garments used Adhesive Interlining
FZ/T 81007-2012 Casual Wear
GSB 16-2159 Knitwear Standard Depth Scale (1/12)
GSB 16-2500 Color Sample Photos of Surface Defect on Knitted Fabrics
3 Requirements
3.1 Instructions for use
Instructions for use of finished products shall comply with GB/T 5296.4 and those for children's products shall comply with GB/T 5296.4 and GB 31701. The fiber content of fabrics on both sides may be identified according to "Side A" and "Side B" respectively; if the fiber contents of the fabrics on both sides are identical, they may be labeled in a combined way.
3.2 Size specifications
3.2.1 Size designations shall be in accordance with those specified in GB/T 1335 and GB/T 6411.
3.2.2 The specifications of main parts of finished products shall be designed independently in accordance with the relevant requirements of GB/T 1335 and GB/T 6411.
3.3 Raw materials
3.3.1 Fabric
Select fabric meeting the quality requirements of this standard in accordance with relevant textile fabric standard, and the dimensional change rate of fabrics on both sides shall be fit with each other.
3.3.2 Accessory materials
3.3.2.1 Filler
The quality of filler shall comply with relevant laws and regulations of the nation as well as mandatory standards, of which the quality of down filler shall also meet the requirements of GB/T 14272.
3.3.2.2 Interlining
The interlining suitable to the performance of the applied fabric shall be adopted, and their quality shall be in accordance with those specified in this standard.
3.3.2.3 Stitch thread
Stitch thread (except for special design) suitable to the performance of applied fabrics and accessory materials shall be adopted; shrinkage of the embroidery thread shall be fit with fabric.
3.3.2.4 Button, zipper and other accessories
The surfaces of button, ornamental button, zipper and other accessories shall be smooth and free from burr, damage, defects and accessible sharp tip or edge. Zippers shall be good in meshing and operate smoothly. Children's clothing shall also meet the relevant requirements of GB 31701.
Note: accessible sharp edge or tip refers to the sharp tip and edge on finished product that may hurt human skin under normal wearing.
3.4 Skewness of yarn as well as strip and plaid
3.4.1 Woven fabric: the permissible skewness shall not be greater than 3% for yarn-dyed and printed strip and grid materials (except for special design) as well as for back and sleeve.
3.4.2 Knitted fabric: the straying end of horizontal stripe shall not be greater than 4%.
3.5 Strip and plaid matching
3.5.1 Except for special design, fabric with 1.0cm visible strip and plaid or above is in accordance with those specified in Table 1.
Table 1 Requirements for Strip and Plaid Matching In: cm
Part name Strip and plaid matching requirements Remarks
Left and right front Strips shall be straight, and plaids shall match each other horizontally, with mutual deviation no larger than 0.3. If the sizes of plaids are different, the part above 1/3 of the garment length shall prevail
Pocket, pocket flap and body piece Strips shall match each other, and plaids shall match each other horizontally, with mutual deviation no larger than 0.3. If the plaid sizes are different, the center in front of the pocket shall prevail.
Collar point and lapel Strips shall be symmetrical, with mutual deviation no larger than 0.3 For shadow strips and plaids, visible strips and plaids shall prevail.
Sleeve Left and right of the sleeve shall be straight, strips and plaids shall be symmetrical, and the mutual deviation relative to the sleeve top shall not be larger than 1.0 —
Center back seam Strips shall match each other, and plaids shall match each other horizontally, with mutual deviation no larger than 0.3. If the sizes of plaids are different, the upper back shall prevail.
Side seam Plaids shall match each other horizontally,, with mutual deviation at the part 10.0 below the armhole no larger than 0.4 —
Outseam Carry out matching horizontally below the knee line, with mutual deviation no larger than 0.5 Visible strip and plaid shall prevail.
Crease line Strips shall be straight, with permissive skewness no larger than 0.8 —
3.5.2 The velvet (down), checkerboard fabric and the whole body shall be in the same direction (except for special design).
3.5.3 Fabric with special pattern shall, based on the main pattern, be in the same direction (except in special design).
3.6 Color difference
3.6.1 Color difference at each part shall not be inferior to Grade 4 and that at top collar and front shall not be inferior to Grade 4-5.
3.6.2 Color difference caused by multilayer fabric or adhesive interlining shall not be inferior to Grade 3-4.
3.6.3 Color difference between tops and bottoms of a homochromatic suit shall not be inferior to Grade 4.
3.7 Appearance defect spot
See Figure 1 for the division of each part of the finished product. The permissibility of defect spot at each part of the finished product shall comply with Table 2.
Foreword i
1 Scope
2 Normative References
3 Requirements
4 Test Methods
5 Inspection Rules
6 Marking, Packaging, Transportation and Storage
Annex A (Normative) Schematic Diagram for the Sampling Position of Back Crotch Seam Strength Test of Trousers
Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by China National Textile and Apparel Council.
This standard is under the jurisdiction of the Subcommittee on Knitwear of the National Technical Committee on Textiles of the Standardization Administration of China (SAC/TC 209/SC 6) and the National Technical Committee on Garments of Standardization Administration of China (SAC/TC 219).
Reversible Garments
1 Scope
This standard specifies the requirements, inspection methods, inspection rules, and marking, packaging, transportation and storage of reversible garments.
This standard is applicable to reversible garments produced with textile fabrics as raw materials.
This standard is not applicable to garments for infants aged 36 months and below.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 250 Textiles - Tests for Colour Fastness - Grey Scale for Assessing Change in Colour
GB/T 1335 (all parts) Standard Sizing Systems for Garments
GB/T 2910 (all parts) Textiles - Quantitative Chemical Analysis
GB/T 2912.1 Textiles - Determination of Formaldehyde - Part 1: Free and Hydrolized Formaldehyde (Water Extraction Method)
GB/T 3917.2 Textiles - Tear Properties of Fabrics - Part 2: Determination of Tear Force of Trouser-shaped Test Specimens (Single Tear Method)
GB/T 3920 Textiles - Tests for Colour Fastness - Colour Fastness to Rubbing
GB/T 3921-2008 Textiles - Tests for Colour Fastness - Colour Fastness to Washing with Soap or Soap and Soda
GB/T 3922 Textiles - Tests for Colour Fastness - Colour Fastness to Perspiration
GB/T 3923.1 Textiles - Tensile Properties of Fabrics - Part 1: Determination of Maximum Force and Elongation at Maximum Force Using the Strip Method
GB/T 4802.1-2008 Textiles - Determination of Fabric Propensity to Surface Fuzzing and to Pilling - Part 1: Circular Locus Method
GB/T 4802.3 Textiles - Determination of Fabric Propensity to Surface Fuzzing and to Pilling - Part 3: Pilling Box Method
GB/T 4841.3 Colour Cards of Standard Depths for Dyeing with Dyestuffs 2/1, 1/3, 1/6, 1/12, 1/25
GB/T 5296.4 Instructions for Use of Products of Consumer Interest - Part 4: Textiles and Apparel
GB/T 5711 Textiles - Tests for Colour Fastness - Colour Fastness to Drycleaning Using Perchloroethylene Solvent
GB/T 5713 Textiles - Tests for Colour Fastness - Colour Fastness to Water
GB/T 6411 A series of size of knitted underwear
GB/T 7573 Textiles - Determination of pH of Aqueous Extract
GB/T 7742.1 Textiles - Bursting Properties of Fabrics - Part 1: Hydraulic Method for Determination of Bursting Strength and Bursting Distension
GB/T 8170 Rules of Rounding Off for Numerical Values & Expression and Judgement of Limiting Values
GB/T 8427-2008 Textiles - Tests for Colour Fastness - Color Fastness to Artificial Light: Xenon Arc Fading Lamp Test
GB/T 8629-2001 Textiles - Domestic Washing and Drying Procedures for Textile Testing
GB/T 8630 Textiles - Determination of Dimensional Change in Washing and Drying
GB/T 14272 Down garments
GB/T 16988 Quantitative Determination for Mixtures of Special Animal Fibre and Wool
GB/T 17592 Textiles - Determination of the Banned Azo Colourants
GB 18383 General Technical Requirements for Products with Filling Materials
GB 18401 National General Safety Technical Code for Textile Products
GB/T 19976-2005 Textiles - Determination of Bursting Strength - Steel Ball Method
GB/T 21294 Testing Methods of Physical and Chemical Performance of Garments
GB/T 21295 Requirements of Physical and Chemical Performance of Garments
GB/T 26385-2011 Knitting Patchwork Clothing
GB/T 29862 Textiles - Identification of Fiber Content
GB/T 31127-2014 Textiles - Tests for Colour Fastness - Colour Fastness to Transfer in Joints
GB 31701 Safety Technical Code for Infants and Children Textile Products
GB/T 31907 Method of Garment Measurement
FZ/T 01026 Textiles - Quantitative Chemical Analysis - Quaternary Fibre Mixtures
FZ/T 01031-2016 Knitted Fabric and Elastic Woven Fabric - Determination of Maximum Force to Seam Rupture and Elongation - Grab Method
FZ/T 01057 (all parts) Test Method for Identification of Textile Fibers
FZ/T 01095 Textile - Test Method of Elastane Fibre Content
FZ/T 30003 Method for Quantitative Analysis of Ramie (Flax Hemp) Cotton Blended Textile - Micro Projection
FZ/T 73053 Knitted Down Garments
FZ/T 80002 Marking, Packaging, Transpiration and Storage for Garments
FZ/T 80004 Rule for Garments Delivery Inspection
FZ/T 80007.3-2006 Dry Wash Resistance Test Method for Garments used Adhesive Interlining
FZ/T 81007-2012 Casual Wear
GSB 16-2159 Knitwear Standard Depth Scale (1/12)
GSB 16-2500 Color Sample Photos of Surface Defect on Knitted Fabrics
3 Requirements
3.1 Instructions for use
Instructions for use of finished products shall comply with GB/T 5296.4 and those for children's products shall comply with GB/T 5296.4 and GB 31701. The fiber content of fabrics on both sides may be identified according to "Side A" and "Side B" respectively; if the fiber contents of the fabrics on both sides are identical, they may be labeled in a combined way.
3.2 Size specifications
3.2.1 Size designations shall be in accordance with those specified in GB/T 1335 and GB/T 6411.
3.2.2 The specifications of main parts of finished products shall be designed independently in accordance with the relevant requirements of GB/T 1335 and GB/T 6411.
3.3 Raw materials
3.3.1 Fabric
Select fabric meeting the quality requirements of this standard in accordance with relevant textile fabric standard, and the dimensional change rate of fabrics on both sides shall be fit with each other.
3.3.2 Accessory materials
3.3.2.1 Filler
The quality of filler shall comply with relevant laws and regulations of the nation as well as mandatory standards, of which the quality of down filler shall also meet the requirements of GB/T 14272.
3.3.2.2 Interlining
The interlining suitable to the performance of the applied fabric shall be adopted, and their quality shall be in accordance with those specified in this standard.
3.3.2.3 Stitch thread
Stitch thread (except for special design) suitable to the performance of applied fabrics and accessory materials shall be adopted; shrinkage of the embroidery thread shall be fit with fabric.
3.3.2.4 Button, zipper and other accessories
The surfaces of button, ornamental button, zipper and other accessories shall be smooth and free from burr, damage, defects and accessible sharp tip or edge. Zippers shall be good in meshing and operate smoothly. Children's clothing shall also meet the relevant requirements of GB 31701.
Note: accessible sharp edge or tip refers to the sharp tip and edge on finished product that may hurt human skin under normal wearing.
3.4 Skewness of yarn as well as strip and plaid
3.4.1 Woven fabric: the permissible skewness shall not be greater than 3% for yarn-dyed and printed strip and grid materials (except for special design) as well as for back and sleeve.
3.4.2 Knitted fabric: the straying end of horizontal stripe shall not be greater than 4%.
3.5 Strip and plaid matching
3.5.1 Except for special design, fabric with 1.0cm visible strip and plaid or above is in accordance with those specified in Table 1.
Table 1 Requirements for Strip and Plaid Matching In: cm
Part name Strip and plaid matching requirements Remarks
Left and right front Strips shall be straight, and plaids shall match each other horizontally, with mutual deviation no larger than 0.3. If the sizes of plaids are different, the part above 1/3 of the garment length shall prevail
Pocket, pocket flap and body piece Strips shall match each other, and plaids shall match each other horizontally, with mutual deviation no larger than 0.3. If the plaid sizes are different, the center in front of the pocket shall prevail.
Collar point and lapel Strips shall be symmetrical, with mutual deviation no larger than 0.3 For shadow strips and plaids, visible strips and plaids shall prevail.
Sleeve Left and right of the sleeve shall be straight, strips and plaids shall be symmetrical, and the mutual deviation relative to the sleeve top shall not be larger than 1.0 —
Center back seam Strips shall match each other, and plaids shall match each other horizontally, with mutual deviation no larger than 0.3. If the sizes of plaids are different, the upper back shall prevail.
Side seam Plaids shall match each other horizontally,, with mutual deviation at the part 10.0 below the armhole no larger than 0.4 —
Outseam Carry out matching horizontally below the knee line, with mutual deviation no larger than 0.5 Visible strip and plaid shall prevail.
Crease line Strips shall be straight, with permissive skewness no larger than 0.8 —
3.5.2 The velvet (down), checkerboard fabric and the whole body shall be in the same direction (except for special design).
3.5.3 Fabric with special pattern shall, based on the main pattern, be in the same direction (except in special design).
3.6 Color difference
3.6.1 Color difference at each part shall not be inferior to Grade 4 and that at top collar and front shall not be inferior to Grade 4-5.
3.6.2 Color difference caused by multilayer fabric or adhesive interlining shall not be inferior to Grade 3-4.
3.6.3 Color difference between tops and bottoms of a homochromatic suit shall not be inferior to Grade 4.
3.7 Appearance defect spot
See Figure 1 for the division of each part of the finished product. The permissibility of defect spot at each part of the finished product shall comply with Table 2.
Contents of FZ/T 73059-2017
Foreword i
1 Scope
2 Normative References
3 Requirements
4 Test Methods
5 Inspection Rules
6 Marking, Packaging, Transportation and Storage
Annex A (Normative) Schematic Diagram for the Sampling Position of Back Crotch Seam Strength Test of Trousers