This standard specifies the terms and definition, designation, requirements, marking, packaging, transportation and storage as well as management and maintenance of the outdoor body-building equipment (hereinafter referred to as "the equipment").
This standard is applicable to outdoor body-building equipment.
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Designation
5 Requirements
5.1 Basic Requirements
5.2 Material Requirements
5.3 Requirements for the shape and structure design
5.4 Static Load Capacity Requirements of Main Parts
5.5 Stability Requirements
5.6 Safety Warning Requirements
5.7 Equipment Installation and Site Requirements
5.8 Safe Service Life and Fatigue Performance Requirements
5.9 Environmental Requirements
5.10 Surface Quality Requirements
5.11 Electrical Safety Requirements
5.12 Additional Requirements
6 Test Methods
6.1 Test Conditions
6.2 Material Inspection
6.3 Inspection for Shape and Structure
6.4 Static Load Capacity Inspection on Main Parts
6.5 Stability Inspection
6.6 Inspection Required by Safety Warning
6.7 Inspection for the Ground Installation and Installation Environment
6.8 Fatigue Performance Inspection
6.9 Inspection Required by the Environment
6.10 Inspection Required by Surface Quality
6.11 Electrical Safety Inspection
6.12 Additionally Required Inspection
7 Marking, Packing, Transportation and Storage
7.1 Marks and instructions
7.2 Packing
7.3 Transportation
7.4 Storage
8 Management and Maintenance
Appendix A (Informative) Common Entrapment Table
Appendix B (Informative) Inspection Table
Bibliography
This standard specifies the terms and definition, designation, requirements, marking, packaging, transportation and storage as well as management and maintenance of the outdoor body-building equipment (hereinafter referred to as "the equipment").
This standard is applicable to outdoor body-building equipment.
Contents of GB 19272-2011
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Designation
5 Requirements
5.1 Basic Requirements
5.2 Material Requirements
5.3 Requirements for the shape and structure design
5.4 Static Load Capacity Requirements of Main Parts
5.5 Stability Requirements
5.6 Safety Warning Requirements
5.7 Equipment Installation and Site Requirements
5.8 Safe Service Life and Fatigue Performance Requirements
5.9 Environmental Requirements
5.10 Surface Quality Requirements
5.11 Electrical Safety Requirements
5.12 Additional Requirements
6 Test Methods
6.1 Test Conditions
6.2 Material Inspection
6.3 Inspection for Shape and Structure
6.4 Static Load Capacity Inspection on Main Parts
6.5 Stability Inspection
6.6 Inspection Required by Safety Warning
6.7 Inspection for the Ground Installation and Installation Environment
6.8 Fatigue Performance Inspection
6.9 Inspection Required by the Environment
6.10 Inspection Required by Surface Quality
6.11 Electrical Safety Inspection
6.12 Additionally Required Inspection
7 Marking, Packing, Transportation and Storage
7.1 Marks and instructions
7.2 Packing
7.3 Transportation
7.4 Storage
8 Management and Maintenance
Appendix A (Informative) Common Entrapment Table
Appendix B (Informative) Inspection Table
Bibliography
