Detail of GB/T 32444-2015

Introduction of GB/T 32444-2015

1 Scope This standard specifies terms and definitions, product classification, requirements, test methods, inspection rules, marking, instruction, packaging, transport and storage of bamboo furniture. This standard is applicable to general technical requirements of bamboo furniture; for bamboo part of other furniture, this standard may also apply by reference. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 250 Textiles - Tests for Colour Fastness - Grey Scale for Assessing Change in Colour GB/T 1043.1 Plastics - Determination of Charpy Impact Properties - Part 1: Non-instrumented Impact Test GB/T 1732 Determination of Impact Resistance of Film GB/T 1931 Method for Determination of the Moisture Content of Wood GB/T 2828.1-2012 Sampling Procedures for Inspection by Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection GB/T 2912.1 Textiles - Determination of Formaldehyde - Part 1: Free and Hydrolized Formaldehyde (Water Extraction Method) GB/T 3324 Wooden Furniture - General Technical Requirements GB/T 3920 Textiles - Tests for Colour Fastness - Colour Fastness to Rubbing GB/T 3921 Textiles - Tests for Colour Fastness - Colour Fastness to Washing with Soap or Soap and Soda GB/T 3922 Textiles - Tests for Colour Fastness - Colour Fastness to Perspiration GB/T 4689.20 Leather - Determination for Adhesion of Finish GB/T 4893.1 Furniture - Assessment of Surface Resistance to Cold Liquids GB/T 4893.2 Furniture - Assessment of Surface Resistance to Wet Heat GB/T 4893.3 Furniture - Assessment of Surface Resistance to Dry Heat GB/T 4893.4 Test of Surface Coatings of Furniture - Part 4: Determination of Adhesion - Cross Cut GB/T 4893.7 Test of Surface Coatings of Furniture - Part 7: Determination of Surface Resistance to Alternation of Heat and Cold GB/T 4893.8 Test of Surface Coatings of Furniture - Part 8:Determination of Wearability GB/T 4893.9 Test of Surface Coatings of Furniture - Part 9: Determination of Resistance to Impact GB 5296.6 Instructions for Use of Products of Consumer Interest - Part 6: Furniture GB 6566-2010 Limits of Radionuclides in Building Materials GB/T 6669 Flexible Cellular Polymeric Materials - Determination of Compression Set GB/T 6670 Flexible Cellular Polymeric Materials - Determination of Resilience by Ball Rebound GB/T 6739-2006 Paints and Varnishes - Determination of Film Hardness by Pencil Test GB/T 7573 Textiles - Determination of pH of Aqueous Extract GB/T 9286 Paints and Varnishes-Cross Cut Test for Films GB/T 9754 Paints and Varnishes - Determination of Specular Gloss of Non-metallic Paint Films at 20° 60°and 85° GB/T 10357.1 Test of Mechanical Properties of Furniture - Part 1: Strength and Durability of Tables GB/T 10357.2 Test of Mechanical Properties of Furniture - Part 2: Stability of Chairs and Stools GB/T 10357.3 Test of Mechanical Properties of Furniture - Part 3: Strength and Durability of Chairs and Stools GB/T 10357.4 Test of Mechanical Properties of Furniture - Part 4: Stability of Storage Units GB/T 10357.5 Test of Mechanical Properties of Furniture - Part 5: Strength and Durability of Storage Units GB/T 10357.6 Test of Mechanical Properties of Furniture - Part 6: Strength and Durability of Beds GB/T 10357.7 Test of Mechanical Properties of Furniture - Part 7: Stability of Tables ... ... ... ... 3 Terms and Definitions For the purposes of this document, the terms and definitions given in GB/T 28202-2011 and the following apply. 3.1 bamboo-culm round and hollow bamboo pole with joint after being felled with root cut and shoots removed 3.2 bamboo-based panel

Contents of GB/T 32444-2015

Foreword i 1 Scope 2 Normative References 3 Terms and Definitions 4 Product Classification 5 Requirements 6 Test Methods 7 Inspection Rules 8 Marking, Instruction, Packaging, Transport and Storage Annex A (Normative) Mechanical Property Test Level Annex B (Informative) Physical and Mechanical Properties of Bamboo materials, Wood and Artificial panels and Determination Method Annex C (Informative) Annual Average Equilibrium Moisture Content of Woods in Various Regions of China Bibliography