Detail of GB/T 32446-2024

Introduction of GB/T 32446-2024

General technical requirements for glass furniture 1 Scope This document specifies classification, requirements, inspection rules, and marking, instructions for use, packaging, transportation and storage of glass furniture, and describes the test methods. This document is applicable to the quality control of glass furniture and its components during design, production, installation and sales. 2 Normative references The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 308.1-2013 Rolling bearings - Balls - Part 1: Steel balls GB/T 2828.1-2012 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection GB/T 3324 General technical requirements for wooden furniture GB/T 3325-2017 General technical requirements for metal furniture GB/T 4893.3 Test of surface coatings of furniture - Part 3: Determination of resistance to dry heat GB/T 10357.1-2013 Test of mechanical properties of furniture - Part 1: Strength and durability of tables GB/T 10357.2 Test of mechanical properties of furniture - Part 2: Stability of chairs and stools GB/T 10357.3 Test of mechanical properties of furniture - Part 3: Strength and durability of chairs and stools GB/T 10357.4 Test of mechanical properties of furniture - Part 4: Stability of storage units GB/T 10357.5 Test of mechanical properties of furniture - Part 5: Strength and durability of storage units GB/T 10357.7 Test of mechanical properties of furniture - Part 7: Stability of tables GB/T 14155-2008 Doorsets - Soft heavy body impact test GB 15763.2-2005 Safety glazing materials in building - Part 2: Tempered glass GB 15763.3-2009 Safety glazing materials in building - Part 3: Laminated glass GB/T 18144 Test method for measurement of stress in glass GB 18584-2024 Limit of harmful substances of furniture GB 28008-2024 Technical specification for the safety of furniture structure GB/T 28202 Furniture industry terminology GB/T 32487-2016 General technical requirements for plastic furniture QB/T 3826 Corrosion-resistant testing method of the metal deposits and conversion coatings for the light industrial products - Neutral salt spraying test (NSS) 3 Terms and definitions For the purposes of this document, the terms and definitions given in GB 28008-2024, GB/T 3324-2017, GB/T 3325-2017 and GB/T 28202 and the following apply. 3.1 metal disk for connect metal disk for carrying a glass component that is bonded to the glass panel material by means of adhesive or otherwise 3.2 glass revolving plate rotatable round disc-shaped glass component Note: Including both load-bearing and non-load-bearing types. 4 Product classification Classification according to the material used: a) Tempered glass furniture; b) Semi-tempered glass furniture; c) Flat glass furniture.

Contents of GB/T 32446-2024

Contents Foreword III 1 Scope 2 Normative references 3 Terms and definitions 4 Product classification 5 Requirements 6 Test methods 7 Inspection rules 8 Marking, instructions for use, packaging, transportation and storage Annex A (Normative) Schematic diagram for clamp marks Annex B (Normative) Safety performance dimensions of glass components Annex C (Normative) Circular holes in tempered and semi-tempered glass Annex D (Normative) Safety performance test methods for structural strength