Detail of GB/T 24821-2024

Introduction of GB/T 24821-2024

GB/T 24821-2024 Dining tables and chairs 1 Scope This document specifies the classification, requirements, inspection rules, and marking, instructions for use, packaging, transport and storage of dining tables and chairs, and describes the test methods. This document is applicable to quality control such as design, production, sales service, inspection and testing of separate and movable dining tables and chairs (including stools) used in indoor dining. This document is not applicable to one-piece dining tables and chairs, and dining tables and chairs for children. 2 Normative references The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies. GB/T 1732-2020 Determination of impact resistance of coating films GB/T 1927.4-2021 Test methods for physical and mechanical properties of small clear wood specimens - Part 4: Determination of moisture content GB/T 2828.1-2012 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection GB/T 3324 General technical requirements for wooden furniture GB/T 3325 General technical requirements for metal furniture GB 4343.1 Electromagnetic compatibility - Requirements for household appliances electric tools and similar apparatus - Part 1: Emission GB/T 4343.2 Electromagnetic compatibility requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity GB/T 4706.1-2024 Household and similar electrical appliances - Safety - Part 1: General requirements GB 4706.29-2008 Household and similar electrical appliances - Safety - Particular requirements for portable induction cooker GB/T 4893.1-2021 Test of surface coatings of furniture - Part 1: Determination of surface resistance to cold liquids GB/T 4893.2-2020 Test of surface coatings of furniture - Part 2: Determination of surface resistance to wet heat GB/T 4893.3-2020 Test of surface coatings of furniture - Part 3: Determination of resistance to dry heat GB/T 4893.4-2023 Test of surface coatings of furniture - Part 4: Determination of adhesion - Cross cut GB/T 4893.7-2013 Test of surface coatings of furniture - Part 7: Determination of surface resistance to alternation of heat and cold GB/T 4893.8-2023 Test of surface coatings of furniture - Part 8: Determination of resistance to abrasion GB/T 4893.9-2013 Test of surface coatings of furniture - Part 9: Determination of resistance to impact GB/T 5296.6 Instructions for use of products of consumer interest - Part 6: Furniture GB/T 6739-2022 Paints and varnishes - Determination of film hardness by pencil test GB/T 9286-2021 Paints and varnishes - Cross-cut test GB/T 9985-2022 Detergents for hand dishwashing GB/T 10357.1-2024 Test of mechanical properties of furniture - Part 1: Strength and durability of tables GB/T 10357.2 Test of mechanical properties of furniture - Part 2: Stability of chairs and stools GB/T 10357.3-2013 Test of mechanical properties of furniture - Part 3: Strength and durability of chairs and stools GB/T 10357.7-2013 Test of mechanical properties of furniture - Part 7: Stability of tables GB 17625.1 Electromagnetic compatibility - Limits - Part 1: Limits for harmonic current emissions (equipment input current ≤16A per phase) GB/T 17657-2022 Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels GB 18584-2024 Limit of harmful substances of furniture GB 28008-2024 Technical specification for the safety of furniture structure GB/T 28202 Furniture industry terminology GB/T 29894 General method of wood identification GB/T 32446-2024 General technical requirements for glass furniture GB/T 33282 General technical requirements for indoor stone furniture JC/T 908-2013 Artificial stone QB/T 1950-2024 Determination of resistance to water of furniture surface coatings QB/T 3826-1999 Corrosion-resistant testing method of the metal deposits and conversion coatings for the light industrial products - Neutral salt spraying test (NSS) 3 Terms and definitions For the purposes of this document, the terms and definitions given in GB/T 28202 apply. 4 Product classification and designation The products are divided into the following by the application occasions: a) Dining tables and chairs for households; b) Dining tables and chairs for other places.

Contents of GB/T 24821-2024

Contents Forward I 1 Scope 2 Normative references 3 Terms and definitions 4 Product classification and designation 5 Requirements 6 Test methods 7 Inspection rules 8 Marking, instructions for use, packaging, transport and storage Annex A (Normative) Annual average equilibrium moisture content of wood in various provinces (regions, special administrative region), municipalities and major cities in China Bibliography