1 Scope
This Standard defines terms specifying tolerances for boundary dimensions, geometrical accuracy, running accuracy and internal clearance for rolling bearings. In addition, it specifies general conditions under which these tolerances apply and gives symbols for a number of the concepts defined.
Measuring and inspection principles and methods for assessing compliance with many of the definitions in this Standard are given in GB/T 307.2-1995. GB/T 6930-2002 is a vocabulary of terms in the field of rolling bearings and, as such, is a valuable complement to this Standard.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 1800.1-1997 Limits and Fits — Bases — Part 1: Terminology (neq ISO 286-1:1988)
GB/T 16892-1997 Geometrical Tolerancing Indication of Non-rigid Parts (eqv ISO 10579:1993)
ISO 1:1975 Standard Reference Temperature for Industrial Length Measurements.
3 General
Contents
Foreword I
1 Scope
2 Normative References
3 General
4 Axes, Directions, Planes, Positions and Surfaces
5 Boundary Dimensions
6 Geometrical Accuracy
7 Running Accuracy
8 Internal Clearance
Appendix A
Bibliography
Indexes
1 Scope
This Standard defines terms specifying tolerances for boundary dimensions, geometrical accuracy, running accuracy and internal clearance for rolling bearings. In addition, it specifies general conditions under which these tolerances apply and gives symbols for a number of the concepts defined.
Measuring and inspection principles and methods for assessing compliance with many of the definitions in this Standard are given in GB/T 307.2-1995. GB/T 6930-2002 is a vocabulary of terms in the field of rolling bearings and, as such, is a valuable complement to this Standard.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 1800.1-1997 Limits and Fits — Bases — Part 1: Terminology (neq ISO 286-1:1988)
GB/T 16892-1997 Geometrical Tolerancing Indication of Non-rigid Parts (eqv ISO 10579:1993)
ISO 1:1975 Standard Reference Temperature for Industrial Length Measurements.
3 General
Contents of GB/T 4199-2003
Contents
Foreword I
1 Scope
2 Normative References
3 General
4 Axes, Directions, Planes, Positions and Surfaces
5 Boundary Dimensions
6 Geometrical Accuracy
7 Running Accuracy
8 Internal Clearance
Appendix A
Bibliography
Indexes