1 Scope
This standard specifies inspection classification, inspection items, sampling schemes and judgment rules for various detergent products, such as laundry powder, liquid detergent, laundry bar soap, toilet soap, dish washing detergent, bath lotion and hand sanitizer.
This standard is applicable to the type inspection, end-of-manufacturing inspection and supervision inspection of various detergent products such as laundry powder, liquid detergent, laundry bar soap, toilet soap, dish washing detergent, bath lotion and hand sanitizer.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 2828.1 Sampling Procedures for Inspection by Attribute - Part1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection (idt ISO 2859-1: 1999)
GB/T 13173.1-1991 Method of Sample Division for Detergents (eqv ISO 607: 1980)
GB/T 10111-2007 Methods for Random Sampling by Utilizing Dices of Random Number
GB/T 15500-1995 Methods of Random Sampling by Utilizing Electronic Sampler of Random Number
JJF 1070-2005 Rules of Metrological Testing for Net Quantity of Products in Prepackages with Fixed Content
QB/T 2952-2008 Requirements for Detergent Marks and Packaging
3 Terms
For the purpose of this standard, the following terms apply.
Foreword i
1 Scope
2 Normative References
3 Terms
4 Inspection Classification
5 Lot Grouping Rules
6 Sampling Rules
7 Judgment and Reinspection Rules
8 Transition Rules
9 Suspension and Recovery of Inspection
Annex A (Normative) Methods for Random Sampling
Annex B (Normative) Sample Separation Method for Solid Detergent Products
1 Scope
This standard specifies inspection classification, inspection items, sampling schemes and judgment rules for various detergent products, such as laundry powder, liquid detergent, laundry bar soap, toilet soap, dish washing detergent, bath lotion and hand sanitizer.
This standard is applicable to the type inspection, end-of-manufacturing inspection and supervision inspection of various detergent products such as laundry powder, liquid detergent, laundry bar soap, toilet soap, dish washing detergent, bath lotion and hand sanitizer.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 2828.1 Sampling Procedures for Inspection by Attribute - Part1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection (idt ISO 2859-1: 1999)
GB/T 13173.1-1991 Method of Sample Division for Detergents (eqv ISO 607: 1980)
GB/T 10111-2007 Methods for Random Sampling by Utilizing Dices of Random Number
GB/T 15500-1995 Methods of Random Sampling by Utilizing Electronic Sampler of Random Number
JJF 1070-2005 Rules of Metrological Testing for Net Quantity of Products in Prepackages with Fixed Content
QB/T 2952-2008 Requirements for Detergent Marks and Packaging
3 Terms
For the purpose of this standard, the following terms apply.
Contents of QB/T 2951-2008
Foreword i
1 Scope
2 Normative References
3 Terms
4 Inspection Classification
5 Lot Grouping Rules
6 Sampling Rules
7 Judgment and Reinspection Rules
8 Transition Rules
9 Suspension and Recovery of Inspection
Annex A (Normative) Methods for Random Sampling
Annex B (Normative) Sample Separation Method for Solid Detergent Products
