1 Scope
This part specifies the dimension, shape, weight, technical requirements, test methods, test rules, packaging, marking and quality certificate, etc. for cold rolled high strength low alloy steel sheets and strips (hereinafter referred to as “steel sheets and strips”).
This part is applicable to steel sheets and strips which are not larger than 3.0mm in thickness and mainly used for manufacturing the structural and reinforcing parts of automobile.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this part. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the standards. For any undated references, the latest edition of the document referred to applies.
GB/T 223.5 Steel and Iron - Determination of Acid-soluble Silicon and Total Silicon Content - Reduced Molybdosilicate Spectrophotometric Method
GB/T 223.9 Iron Steel and Alloy - Determination of Aluminium Content - Chrom Azurol S Photometric Method
GB/T 223.13 Methods for Chemical Analysis of Iron, Steel and Alloy - The Ammonium Ferrous Sulfate Titration Method for the Determination of Vanadium Content
GB/T 223.16 Methods for Chemical Analysis of Iron, Steel and Alloy - The Chromotropic Acid Photometric Method for the Determination of Titanium Content
GB/T 223.17 Methods for Chemical Analysis of Iron, Steel and Alloy - The Diantipyrylmethane Photometric Method for the Determination of Titanium Content
GB/T 223.40 Iron Steel and Alloy - Determination of Niobium Content by the Sulphochlorophenol S Spectrophotometric Method
GB/T 223.59 Iron Steel and Alloy - Determination of Phosphorus Content - Bismuth Phosphomolybdate Blue Spectrophotometric Method and Antimony Phosphomolybdate Blue Spectrophotometric Method
GB/T 223.60 Methods for Chemical Analysis of Iron, Steel and Alloy - The Perchloric Acid Dehydration Gravimetric Method for the Determination of Silicon Content
GB/T 223.63 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium (Potassium) Periodate Photometric Method for the Determination of Manganese Content
GB/T 223.64 Iron Steel and Alloy - Determination of Manganese Content - Flame Atomic Absorption Spectrometric Method
GB/T 223.67 Iron Steel and Alloy - Determination of Sulfur Content - Methylene Blue Spectrophotometric Method
GB/T 223.68 Methods for Chemical Analysis of Iron, Steel and Alloy - The Potassium Iodate Titration Method after Combustion in the Pipe Furnace for the Determination of Sulfur Content
GB/T 223.69 Iron Steel and Alloy - Determination of Carbon Contents - Gas-volumetric Method after Combustion in the Pipe Furnace
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification and Codification
5 Ordering Information
6 Dimensions, Shape, Weight and Permissible Deviation
7 Technical Requirements
8 Inspection and Test
9 Numerical Rounding
10 Packaging, Marking and Quality Certificate
11 Cross Reference between Domestic and Foreign Designations
Appendix A (Informative) Chemical Composition References
Appendix B (Informative) Cross Reference between Domestic and Foreign Designations
1 Scope
This part specifies the dimension, shape, weight, technical requirements, test methods, test rules, packaging, marking and quality certificate, etc. for cold rolled high strength low alloy steel sheets and strips (hereinafter referred to as “steel sheets and strips”).
This part is applicable to steel sheets and strips which are not larger than 3.0mm in thickness and mainly used for manufacturing the structural and reinforcing parts of automobile.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this part. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the standards. For any undated references, the latest edition of the document referred to applies.
GB/T 223.5 Steel and Iron - Determination of Acid-soluble Silicon and Total Silicon Content - Reduced Molybdosilicate Spectrophotometric Method
GB/T 223.9 Iron Steel and Alloy - Determination of Aluminium Content - Chrom Azurol S Photometric Method
GB/T 223.13 Methods for Chemical Analysis of Iron, Steel and Alloy - The Ammonium Ferrous Sulfate Titration Method for the Determination of Vanadium Content
GB/T 223.16 Methods for Chemical Analysis of Iron, Steel and Alloy - The Chromotropic Acid Photometric Method for the Determination of Titanium Content
GB/T 223.17 Methods for Chemical Analysis of Iron, Steel and Alloy - The Diantipyrylmethane Photometric Method for the Determination of Titanium Content
GB/T 223.40 Iron Steel and Alloy - Determination of Niobium Content by the Sulphochlorophenol S Spectrophotometric Method
GB/T 223.59 Iron Steel and Alloy - Determination of Phosphorus Content - Bismuth Phosphomolybdate Blue Spectrophotometric Method and Antimony Phosphomolybdate Blue Spectrophotometric Method
GB/T 223.60 Methods for Chemical Analysis of Iron, Steel and Alloy - The Perchloric Acid Dehydration Gravimetric Method for the Determination of Silicon Content
GB/T 223.63 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium (Potassium) Periodate Photometric Method for the Determination of Manganese Content
GB/T 223.64 Iron Steel and Alloy - Determination of Manganese Content - Flame Atomic Absorption Spectrometric Method
GB/T 223.67 Iron Steel and Alloy - Determination of Sulfur Content - Methylene Blue Spectrophotometric Method
GB/T 223.68 Methods for Chemical Analysis of Iron, Steel and Alloy - The Potassium Iodate Titration Method after Combustion in the Pipe Furnace for the Determination of Sulfur Content
GB/T 223.69 Iron Steel and Alloy - Determination of Carbon Contents - Gas-volumetric Method after Combustion in the Pipe Furnace
Contents of GB/T 20564.4-2010
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification and Codification
5 Ordering Information
6 Dimensions, Shape, Weight and Permissible Deviation
7 Technical Requirements
8 Inspection and Test
9 Numerical Rounding
10 Packaging, Marking and Quality Certificate
11 Cross Reference between Domestic and Foreign Designations
Appendix A (Informative) Chemical Composition References
Appendix B (Informative) Cross Reference between Domestic and Foreign Designations