Recovery of traction battery used in electric vehicle - Management specification - Part 2: Take-back service network
1 Scope
This document specifies the construction, operation, safety, environmental protection and emergency requirements for take-back service network of traction battery used in electric vehicle.
This document is applicable to the construction, management and operation of take-back service network for recovering waste and used traction battery packs, modules and cells. For take-back service network of other types of lithium-ion batteries, such as consumption and energy storage, this standard can be used as an reference.
This document is not applicable to places for storing lead-acid batteries used in electric vehicles.
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 2894-2008 Safety signs and guideline for the use
GB 15562.2 Graphical signs for environmental protection - Solid waste storage (disposal) site
GB18599 Standard for pollution control on the non-hazardous industrial solid waste storage and landfill
GB/T 19596 Terminology of electric vehicles
GB 22128 Technical specifications for end-of-life vehicles collecting and dismantling enterprises
GB/T 26493 Store and transport regulation of battery scraps
GB/T 26989 Automobile recovery - Terminology
GB/T 29639 Guidelines for enterprises to develop emergency response plan for work place accidents
GB/T 33598.3 Recovery of traction battery used in electric vehicle - Recycling - Part 3: Specification for discharging
GB/T 38698.1 Recycling of traction battery used in electric vehicle - Management specification - Part 1:Packing and transporting
GB/T 39652.1 Emergency response guideline for transportation of dangerous goods - Part 1: General provisions
GB 50016 Code for fire protection design of buildings
GB 50140 Code for design of extinguisher distribution in buildings
WB/T 1061 Management specification for waste secondary battery recycling
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T19596 and GB/T26989 and the following apply.
3.1
waste and used traction battery
traction battery cells, modules and battery packs scrapped in the process of research and development, production, testing, storage, transportation, use, maintenance, vehicle scrapping and cascade utilization, etc., which have lost their original use value
3.2
Collect
the process of collecting waste and used traction battery to take-back service network
3.15
centralized take back service network
take-back service network that has a large special storage site and relatively perfect facilities and equipment, and can store waste and used traction battery for a long time
4 Construction requirements
4.1 Site selection requirements
4.1.1 Collection take-back service network (hereinafter referred to as "collection network") should be located in maintenance service network, power stations, scrapped motor vehicle recovery and dismantling enterprises, etc.
4.1.2 The centralized take back service network (hereinafter referred to as "centralized network") shall be located in accordance with the relevant requirements of GB 18599 and GB 50016, and keep a fire prevention distance of at least 20 m from civil buildings.
Foreword i
Introduction ii
1 Scope
2 Normative references
3 Terms and definitions
4 Construction requirements
5 Operation requirements
6 Safety, environmental protection and emergency requirements
Annex A (Informative) Technical indicators of professional facilities for take-back service network
Annex B (Informative) Operation process of take-back service network
Bibliography
Recovery of traction battery used in electric vehicle - Management specification - Part 2: Take-back service network
1 Scope
This document specifies the construction, operation, safety, environmental protection and emergency requirements for take-back service network of traction battery used in electric vehicle.
This document is applicable to the construction, management and operation of take-back service network for recovering waste and used traction battery packs, modules and cells. For take-back service network of other types of lithium-ion batteries, such as consumption and energy storage, this standard can be used as an reference.
This document is not applicable to places for storing lead-acid batteries used in electric vehicles.
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 2894-2008 Safety signs and guideline for the use
GB 15562.2 Graphical signs for environmental protection - Solid waste storage (disposal) site
GB18599 Standard for pollution control on the non-hazardous industrial solid waste storage and landfill
GB/T 19596 Terminology of electric vehicles
GB 22128 Technical specifications for end-of-life vehicles collecting and dismantling enterprises
GB/T 26493 Store and transport regulation of battery scraps
GB/T 26989 Automobile recovery - Terminology
GB/T 29639 Guidelines for enterprises to develop emergency response plan for work place accidents
GB/T 33598.3 Recovery of traction battery used in electric vehicle - Recycling - Part 3: Specification for discharging
GB/T 38698.1 Recycling of traction battery used in electric vehicle - Management specification - Part 1:Packing and transporting
GB/T 39652.1 Emergency response guideline for transportation of dangerous goods - Part 1: General provisions
GB 50016 Code for fire protection design of buildings
GB 50140 Code for design of extinguisher distribution in buildings
WB/T 1061 Management specification for waste secondary battery recycling
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T19596 and GB/T26989 and the following apply.
3.1
waste and used traction battery
traction battery cells, modules and battery packs scrapped in the process of research and development, production, testing, storage, transportation, use, maintenance, vehicle scrapping and cascade utilization, etc., which have lost their original use value
3.2
Collect
the process of collecting waste and used traction battery to take-back service network
3.15
centralized take back service network
take-back service network that has a large special storage site and relatively perfect facilities and equipment, and can store waste and used traction battery for a long time
4 Construction requirements
4.1 Site selection requirements
4.1.1 Collection take-back service network (hereinafter referred to as "collection network") should be located in maintenance service network, power stations, scrapped motor vehicle recovery and dismantling enterprises, etc.
4.1.2 The centralized take back service network (hereinafter referred to as "centralized network") shall be located in accordance with the relevant requirements of GB 18599 and GB 50016, and keep a fire prevention distance of at least 20 m from civil buildings.
Contents of GB/T 38698.2-2023
Foreword i
Introduction ii
1 Scope
2 Normative references
3 Terms and definitions
4 Construction requirements
5 Operation requirements
6 Safety, environmental protection and emergency requirements
Annex A (Informative) Technical indicators of professional facilities for take-back service network
Annex B (Informative) Operation process of take-back service network
Bibliography