1 Scope
This standard is applicable to the safety management for telecommunication rooms of dominant telecommunication service operators and serves as reference for non-dominant telecommunication service operators.
Safety management for telecommunication room covers fire protection safety management, operation safety management and safeguard safety management for telecommunication room.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB 8702 Regulations for Electromagnetic Radiation Protection
GB 50016 Code for Fire Protection Design of Buildings
GB 50045 Code for Fire Protection Design of Tall Building
GB 50116 Code for Design of Automatic Fire Alarm System
GB 50311 Code for Engineering Design of Generic Cabling System
GB 50343 Technical Code for Protection Against Lightning of Building Electronic Information System
GB 50348 Technical Code for Engineering of Security and Protection System
GB 50373 Design Code for Communication Conduit and Passage Engineering
GB 50394 Code of Design for Intrusion Alarm Systems Engineering
GB 50395 Code of Design for Video Monitoring System
GB 50396 Code of Design for Access Control Systems Engineering
YD/T 754 General Rules for Electrostatic Protection of Telecommunication Room
YD/T 950 Technical Requirements and Test Methods for Protection Against Overvoltage and Overcurrents on Telecommunication Switching Equipment
YD/T 1712-2007 Environmental Requirements for Telecommunication Houses
YD 5002 Design Standard for Fire Protection of Posts & Communications Building
YD/T 5003-2005 Specifications of Engineering Design for Telecommunication Private Premise
YD/T 5026 Installation and Design Standard for Cabling Duct in The Room of Telecommunication
YD 5039 Provisional Specifications on Environment Protection for Engineering Construction of Telecommunications
YD 5054 Standard for Classification of Seismic Protection of Telecommunication Buildings
YD/T 5059 Design Specification for Seismic Installation of Telecommunication Equipment
YD 5098 Specifications of Engineering Design for Lightning Protection and Earthing Design for Telecommunication Bureaus(Stations)
YD/T 5151 Design Specification of Optical Fiber Cable in the Leading-in Room
JGJ 16 Code for Electrical Design of Civil Buildings
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions apply.
3.1
dominant telecommunication service operators
operators which control necessary telecommunication infrastructure, occupy large proportion in telecommunication service market and impose substantial influence on other telecommunication service operators' access to telecommunication service market
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Objective
5 Organization and Duties
6 Management Provisions
7 Management Process
Annex A (Normative) Technical Requirements
1 Scope
This standard is applicable to the safety management for telecommunication rooms of dominant telecommunication service operators and serves as reference for non-dominant telecommunication service operators.
Safety management for telecommunication room covers fire protection safety management, operation safety management and safeguard safety management for telecommunication room.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB 8702 Regulations for Electromagnetic Radiation Protection
GB 50016 Code for Fire Protection Design of Buildings
GB 50045 Code for Fire Protection Design of Tall Building
GB 50116 Code for Design of Automatic Fire Alarm System
GB 50311 Code for Engineering Design of Generic Cabling System
GB 50343 Technical Code for Protection Against Lightning of Building Electronic Information System
GB 50348 Technical Code for Engineering of Security and Protection System
GB 50373 Design Code for Communication Conduit and Passage Engineering
GB 50394 Code of Design for Intrusion Alarm Systems Engineering
GB 50395 Code of Design for Video Monitoring System
GB 50396 Code of Design for Access Control Systems Engineering
YD/T 754 General Rules for Electrostatic Protection of Telecommunication Room
YD/T 950 Technical Requirements and Test Methods for Protection Against Overvoltage and Overcurrents on Telecommunication Switching Equipment
YD/T 1712-2007 Environmental Requirements for Telecommunication Houses
YD 5002 Design Standard for Fire Protection of Posts & Communications Building
YD/T 5003-2005 Specifications of Engineering Design for Telecommunication Private Premise
YD/T 5026 Installation and Design Standard for Cabling Duct in The Room of Telecommunication
YD 5039 Provisional Specifications on Environment Protection for Engineering Construction of Telecommunications
YD 5054 Standard for Classification of Seismic Protection of Telecommunication Buildings
YD/T 5059 Design Specification for Seismic Installation of Telecommunication Equipment
YD 5098 Specifications of Engineering Design for Lightning Protection and Earthing Design for Telecommunication Bureaus(Stations)
YD/T 5151 Design Specification of Optical Fiber Cable in the Leading-in Room
JGJ 16 Code for Electrical Design of Civil Buildings
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions apply.
3.1
dominant telecommunication service operators
operators which control necessary telecommunication infrastructure, occupy large proportion in telecommunication service market and impose substantial influence on other telecommunication service operators' access to telecommunication service market
Contents of YD/T 2057-2009
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Objective
5 Organization and Duties
6 Management Provisions
7 Management Process
Annex A (Normative) Technical Requirements