Detail of GB/T 33271-2016

Introduction of GB/T 33271-2016

Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative. This standard is developed in accordance with the rules given in GB/T 1.1-2009 This standard was proposed by China National Textile and Apparel Council. This standard is under the jurisdiction of SAC/TC 219 National Technical Committee on Garments of Standardization Administration of China. Woven Garments for Infants 1 Scope This standard specifies terms and definitions, requirements, inspection methods, inspection classification rules as well as marking, packaging, transport and storage of woven garments for infants. This standard is applicable to garments for infants with fabric woven with textile machine as main shell fabric. This standard may be implemented by reference for infant hat, gloves, socks and bib with woven with textile machine as main shell fabric. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 250 Textiles - Tests for Colour Fastness - Grey Scale for Assessing Change in Colour GB/T 1335.3 Standard Sizing Systems for Garments - Children GB/T 3921-2008 Textiles - Tests for Colour Fastness - Colour Fastness to Washing with Soap or Soap and Soda GB/T 3923.1 Textiles - Tensile Properties of Fabrics - Part 1: Determination of Maximum Force and Elongation at Maximum Force Using the Strip Method GB/T 4841.3 Colour Cards of Standard Depths for Dyeing with Dyestuffs 2/1, 1/3, 1/6, 1/12 and 1/25 GB 5296.4 Instructions for Use of Products of Consumer Interest - Part 4: Textiles and Apparel GB/T 8629-2001 Textiles - Domestic Washing and Drying Procedures for Textile Testing GB/T 8630 Textiles - Determination of Dimensional Change in Washing and Drying GB/T 14644 Textiles - Burning Behaviour - 45° Test Determination of Flame Spread Rate GB/T 14801 Test Method for Skewness and Bow in Woven and Knitted Fabrics GB/T 15557 Terms Used by the Clothing Industry GB 18401 National General Safety Technical Code for Textile Products GB/T 20388 Textiles - Determination of the Content of Phthalates GB/T 21294 Testing Methods of Physical and Chemical Performance of Garments GB/T 21295 Requirements of Physical and Chemical Performance of Garments GB/T 22702 Standard Safety Size for Drawstrings on Children’s Upper Wear GB/T 22705 Safety Specifications for Cords and Drawstrings on Children’s Clothing GB/T 24121 Textile Products - Determination of the Remains of Broken Sewing Needle GB/T 29862 Textiles - Identification of Fiber Content GB/T 30157 Textiles - Determination of Total Content of Lead and Cadmium FZ/T 80002 Marking Packaging Transportation and Storage for Garments FZ/T 80004 Rule for Garments Delivery Inspection 3 Terms and Definitions For the purposes of this document, the terms and definitions given in GB/T 15557 and the following apply. 3.1 garments for infants garments for infants with age of and less than 36 months Note: it is generally applicable to garments for infants with height of and less than 100cm. 3.2 attached components components attached on garments for infants with the functions of connection, decoration and description 4 Requirements 4.1 Instruction The instruction shall comply with the requirements of GB 5296.4; as for size designation of teddies and dress, height/chest girth shall be marked. "No Dry Cleaning" shall be adopted as product maintenance method. 4.2 Size designation and specification 4.2.1 The size designation shall comply with those specified in GB/T 1335.3. 4.2.2 The specification for major parts shall be designed according to the relevant requirements of GB/T 1335.3. 4.2.3 Other textile shall be designed according to the main characteristics and specifications of the product. 4.3 Raw materials 4.3.1 Shell fabric Shell fabric conforming to the quality requirement of this standard shall be selected according to the relevant standards of the nation regarding textile fabrics. 4.3.2 Lining fabric Lining fabric suitable for the applied shell fabric and meeting the quality requirements of this standard shall be adopted. 4.3.3 Filler Satisfactory fiber or its products shall be selected according to relevant standards of the nation. 4.3.4 Auxiliary material 4.3.4.1 Lapping cloth, decorative lace and bagging The lapping cloth, decorative lace and bagging suitable for the properties of the used shell fabric and lining fabric shall be adopted and their quality shall meet the requirements of this standard. 4.3.4.2 Suture, drawstrings and cords, elastic ribbon Suture, drawstrings and cords, elastic ribbon suitable to performance, color and luster of used shell and lining fabrics shall be selected and used (expect ornamental thread and tape). 4.3.4.3 Button, zipper and other attached components Button (except decorative button), zipper and other attached components suitable for the used shell fabric shall be adopted. Button, decorative button, zipper and other attached components shall be surface-smooth and free of burr, damage, defect or accessible sharp tip or edge. The appearance of attached components shall not be similar to food, and buttons including two or more rigid parts shall not be used; slider of zipper shall be non-removable; the maximum dimension of attached components shall be greater than 3mm. Note: accessible sharp tip or edge refers to any sharp edge or tip on finished product that may cause harm to human skin under normal wearing.

Contents of GB/T 33271-2016

Contents Foreword i 1 Scope 2 Normative References 3 Terms and Definitions 4 Requirements 5 Inspection Methods 6 Inspection Classification Rules 7 Marking, Packaging, Transport and Storage Annex A (Normative) Test Methods for Stretching Resistance of Attached Components Annex B (Normative) List of Specific Substances of Phthalate