1 Scope
This Standard specifies determination methods for total content of lead and cadmium in textile products.
This Standard is applicable to various textile products.
2 Normative References
The following document is essential for the application of this document. For dated reference, only the edition cited applies. For undated reference, the latest edition (including any amendments) applies.
GB/T 6682 Water for Analytical Laboratory Use - Specification and Test Methods
3 Principle
After the specimen is digested with concentrated acid and the digested solution is diluted and scaled to the volume, emission intensity of lead and cadmium is determined with inductively coupled plasma emission spectrometer (ICP-AES) under appropriate conditions; by comparison of standard work curves, concentration of various metal ions is determined and total amount of heavy metal in the specimen is calculated.
4 Reagents and Materials
Foreword I
1 Scope
2 Normative References
3 Principle
4 Reagents and Materials
5 Apparatuses
6 Analysis Steps
7 Calculation of Results
8 Determination of Lower Limit and Precision
9 Test Report
Appendix A (Informative) Pretreatment Method for Accessories and Decoration Components of Textile Products
Appendix B (Informative) Operating Conditions of ICP Spectrometer
1 Scope
This Standard specifies determination methods for total content of lead and cadmium in textile products.
This Standard is applicable to various textile products.
2 Normative References
The following document is essential for the application of this document. For dated reference, only the edition cited applies. For undated reference, the latest edition (including any amendments) applies.
GB/T 6682 Water for Analytical Laboratory Use - Specification and Test Methods
3 Principle
After the specimen is digested with concentrated acid and the digested solution is diluted and scaled to the volume, emission intensity of lead and cadmium is determined with inductively coupled plasma emission spectrometer (ICP-AES) under appropriate conditions; by comparison of standard work curves, concentration of various metal ions is determined and total amount of heavy metal in the specimen is calculated.
4 Reagents and Materials
Contents of GB/T 30157-2013
Foreword I
1 Scope
2 Normative References
3 Principle
4 Reagents and Materials
5 Apparatuses
6 Analysis Steps
7 Calculation of Results
8 Determination of Lower Limit and Precision
9 Test Report
Appendix A (Informative) Pretreatment Method for Accessories and Decoration Components of Textile Products
Appendix B (Informative) Operating Conditions of ICP Spectrometer
