2025-3-22 18.97.9.169
Code of China Chinese Classification Professional Classification ICS Classification Latest News Value-added Services

Position: Chinese Standard in English/GB 226-1991
GB 226-1991   Etch test for macrostructure and defect of steels (English Version)
Standard No.: GB 226-1991 Status:superseded remind me the status change

Email:

Language:English File Format:PDF
Word Count: 2000 words Price(USD):40.0 remind me the price change

Email:

Implemented on:1992-3-1 Delivery: via email in 1 business day
,,
Standard No.: GB 226-1991
English Name: Etch test for macrostructure and defect of steels
Chinese Name: 钢的低倍组织及缺陷酸蚀检验法
Chinese Classification: H24    Metallographic testing method
Professional Classification: GB    National Standard
ICS Classification: 77.040.30 77.040.30    Chemical analysis of metals 77.040.30
Issued by: AQSIQ
Issued on: 1991-6-22
Implemented on: 1992-3-1
Status: superseded
Superseded by:GB/T 226-2015 Test method for macrostructure and defect of steel by etching
Superseded on:2016-6-1
Superseding:GB 226-1977
Language: English
File Format: PDF
Word Count: 2000 words
Price(USD): 40.0
Delivery: via email in 1 business day
This national standard specifies the inspection for the hot and cold acid etch and electric erosion method of the steel’s macrostructure and defects. This standard is applicable to inspection of steel's macrostructure and defect. Arbitrating inspection shall be subject to hot acid etching method is there is no specific requirements on technical condition.
Referred in GB 226-1991:
*GB/T 25684.5-2021 Earth-moving machinery—Safety—Part 5: Requirements for hydraulic excavators
*GB/T 24166-2021 Determination of the content of chlorinated phenols in dye products
*GB/T 21437.2-2021 Road vehicles—Test method of electrical disturbances from conduction and coupling—Part 2: Electrical transient conduction along supply lines only
*GB/T 20882.2-2021 Quality requirements for starch sugar—Part 2: Glucose syrup and glucose syrup powder
*GB/T 20076-2021 Measurement methods of maximum torque and maximum net power of engines for motorcycles and mopeds
*GB/T 19056-2021 Vehicle travelling data recorder
*GB/T 5267.2-2021 Fasteners—Non-electrolytically applied zinc flake coatings
*GB/T 10827.2-2021 Industrial trucks—Safety requirements and verification—Part 2: Self-propelled variable-reach trucks
*GB/T 41134.1-2021 Fuel cell power systems for industrial electric trucks—Part 1: Safety
*GB/T 41042-2021 Guidance for utilization and classification of content of valuable elements in coal
*GB/T 9441-2021 Metallographic test method for spheroidal graphite cast iron
*QB/T 5661-2021 Clothes caring machine
*QB/T 5659-2021 Cribs
*GB 55002-2021 General code for seismic precaution of buildings and municipal engineering
*QB/T 2924-2021 Fur-test methods for colour fastness to perspiration
GB 226-1991 is referred in:
* YB/T 5346-2006 Cold drawn special shaped steel bar
* GB 50661-2011 Code for welding of steel structures
* SH 3408-1996 Pipe Equipment Sandard for Petrochemical Industry
* GB 17258-1998 Steel cylinders for the on-board of compressed natural gas as a fuel for vehicles
* GB 5099-1994 Seamless steel gas cylinders
* GB 4237-1992 Hot Rolled Stainless Steel Sheets and Plates
* GB/T 16507-1996 Rules for Construction of Stationary Boilers
* GB 50661-2011 Code for welding of steel structures
* GB 17258-1998 Steel cylinders for the on-board of compressed natural gas as a fuel for vehicles
* SH 3408-1996 Pipe Equipment Sandard for Petrochemical Industry
* GB/T 16507-1996 Rules for Construction of Stationary Boilers
* GB 5099-1994 Seamless steel gas cylinders
* GB 4237-1992 Hot Rolled Stainless Steel Sheets and Plates
* GB 4237-1992 Hot Rolled Stainless Steel Sheets and Plates
* GB/T 3078-1994 Technical Requirements for Quality Structural Steels Cold Drawn Bar
* GB 50661-2011 Code for welding of steel structures
* GB 50661-2011 Code for welding of steel structures
* GB/T 16507-1996 Rules for Construction of Stationary Boilers
* GB/T 3077-1999 Alloy Structure Steels
* GB/T 1222-2007 Spring steels
* GB/T 18984-2003 Seamless steel tubes for low-temperature-service piping
* GB/T 17396-2009 Hot-rolled seamless steel tubes for hydraulic pillar service
* GB 3087-2008 Seamless Steel Tubes for Low and Medium Pressure Boiler
* GB 19158-2003 Steel cylinders for the storage of compressed natural gas
* GB 24160-2009 Hoop-wrapped composite cylinders with steel liner for the on-board storage of compressed natural gas as a fuel for automotive vehicles
* GB/T 3078-2008 Quality structural steel cold drawn bars
* GB/T 6478-2001 Steels for cold heading and cold extruding
* GB/T 18983-2003 Oil - Hardened and tempered stell wire for mechanical springs
* GB/T 5216-2004 Structural steels subject to end-quench hardenability requirments
* GB/T 699-1999 Quality carbon structural steels
* GB 699-1999
* JB/T 4385.1-1999 General specifications for open die forgings on hammer
* GB 9948-2013 Seamless steel tubes for petroleum cracking
* GB 9948-2013 Seamless steel tubes for petroleum cracking
* GB/T 17396-2009 Hot-rolled seamless steel tubes for hydraulic pillar service
* GB 24160-2009 Hoop-wrapped composite cylinders with steel liner for the on-board storage of compressed natural gas as a fuel for automotive vehicles
* GB 5310-2008 Seamless Steel Tubes and Pipes for High Pressure Boiler
* GB 3087-2008 Seamless Steel Tubes for Low and Medium Pressure Boiler
* GB 3087-2008 Seamless Steel Tubes for Low and Medium Pressure Boiler
* GB/T 711-2008 Hot-rolled Quality Carbon Structural Steel Plates, Sheets and Wide Strips
* GB/T 3078-2008 Quality structural steel cold drawn bars
* GB/T 3078-2008 Quality structural steel cold drawn bars
* GB/T 5216-2004 Structural steels subject to end-quench hardenability requirments
* GB 19158-2003 Steel cylinders for the storage of compressed natural gas
* GB/T 18984-2003 Seamless steel tubes for low-temperature-service piping
* GB/T 18983-2003 Oil - Hardened and tempered stell wire for mechanical springs
* GB/T 6478-2001 Steels for cold heading and cold extruding
* GB 699-1999 Quality Carbon Structure Steels
* GB/T 699-1999 Quality carbon structural steels
* GB/T 3077-1999 Alloy Structure Steels
* JB/T 4385.1-1999 General specifications for open die forgings on hammer
* GB 3087-2008 Seamless Steel Tubes for Low and Medium Pressure Boiler
* GB/T 1220-2007 Stainless steel bars
* GB/T 3078-2008 Quality structural steel cold drawn bars
* GB/T 22345-2008 Grades of fresh chinese jujube fruit
* TB/T 2344-2012 Technical Specifications for the Procurement of 43 kg/m~75kg/m as Rolled Rails
* GB/T 18983-2003 Oil - Hardened and tempered stell wire for mechanical springs
* GB/T 28417-2012 Carbon bearing steel
* GB/T 1220-2007 Stainless steel bars
* GB 9948-2006 Seamless steel tubes for petroleum cracking
* GB 17258-2011 Steel cylinders for the on-board storage of compressed natural gas as a fuel for automotive vehicles
* GB 5310-2008 Seamless Steel Tubes and Pipes for High Pressure Boiler
* GB 5310-2008 Seamless Steel Tubes and Pipes for High Pressure Boiler
* GB/T 15711-1995 Steel Products - Method for Etch Test of Tower Sample
* TB/T 1779-1993 Technical Specification for Quenching of Turnout Steel Rails
*TB/T 2945-1999 Technical Specification for LZ50 Steel Shaft and Steel Billet for Railway Vehicle
*YB 4068-1991 Hot-rolled ring
*GB 1220-1992 Stainless steel bars
Code of China
Standard
GB 226-1991  Etch test for macrostructure and defect of steels (English Version)
Standard No.GB 226-1991
Statussuperseded
LanguageEnglish
File FormatPDF
Word Count2000 words
Price(USD)40.0
Implemented on1992-3-1
Deliveryvia email in 1 business day
Detail of GB 226-1991
Standard No.
GB 226-1991
English Name
Etch test for macrostructure and defect of steels
Chinese Name
钢的低倍组织及缺陷酸蚀检验法
Chinese Classification
H24
Professional Classification
GB
ICS Classification
Issued by
AQSIQ
Issued on
1991-6-22
Implemented on
1992-3-1
Status
superseded
Superseded by
GB/T 226-2015 Test method for macrostructure and defect of steel by etching
Superseded on
2016-6-1
Abolished on
Superseding
GB 226-1977
Language
English
File Format
PDF
Word Count
2000 words
Price(USD)
40.0
Keywords
GB 226-1991, GB/T 226-1991, GBT 226-1991, GB226-1991, GB 226, GB226, GB/T226-1991, GB/T 226, GB/T226, GBT226-1991, GBT 226, GBT226
Introduction of GB 226-1991
This national standard specifies the inspection for the hot and cold acid etch and electric erosion method of the steel’s macrostructure and defects. This standard is applicable to inspection of steel's macrostructure and defect. Arbitrating inspection shall be subject to hot acid etching method is there is no specific requirements on technical condition.
Contents of GB 226-1991
About Us   |    Contact Us   |    Terms of Service   |    Privacy   |    Cancellation & Refund Policy   |    Payment
Tel: +86-10-8572 5655 | Fax: +86-10-8581 9515 | Email: coc@codeofchina.com | QQ: 672269886
Copyright: TransForyou Co., Ltd. 2008-2040
 
 
Keywords:
GB 226-1991, GB/T 226-1991, GBT 226-1991, GB226-1991, GB 226, GB226, GB/T226-1991, GB/T 226, GB/T226, GBT226-1991, GBT 226, GBT226