2023-2-3 3.214.216.26
Code of China Chinese Classification Professional Classification ICS Classification Latest News Value-added Services

Position: Chinese Standard in English/GB/T 10561-2005
GB/T 10561-2005   Steel - Determination of Content of Nonmetallic Inclusions - Micrographic Method Using Standards Diagrams (English Version)
Standard No.: GB/T 10561-2005 Status:valid remind me the status change

Email:

Language:English File Format:PDF
Word Count: 5000 words Price(USD):70.0 remind me the price change

Email:

Implemented on:2005-10-1 Delivery: via email in 1 business day
,,
Standard No.: GB/T 10561-2005
English Name: Steel - Determination of Content of Nonmetallic Inclusions - Micrographic Method Using Standards Diagrams
Chinese Name: 钢中非金属夹杂物含量的测定 标准评级图显微检验法
Chinese Classification: H24    Metallographic testing method
Professional Classification: GB    National Standard
ICS Classification: 77.040.30 77.040.30    Chemical analysis of metals 77.040.30
Issued by: AQSIQ, SAC
Issued on: 2005-05-13
Implemented on: 2005-10-1
Status: valid
Superseding:GB/T 10561-1989 Steel-Determination of content of non-metallic inclusion-Micrographic method using standard diagrams
Language: English
File Format: PDF
Word Count: 5000 words
Price(USD): 70.0
Delivery: via email in 1 business day
This standard specifies micro evaluation methods for evaluating non-metallic inclusions of rolled or forged steel products whose compression ratio is larger than or equal to 3 with standard diagrams. The method is comprehensively used for evaluation of the flexibility of purpose steel. However, owing to the impact of testing personnel, the test results are difficult to reappear even if adopting lots of samples. Therefore, great discretion is required while using this method. Note: these standard diagrams mayn't be applicable to evaluate certain types of steels (like free-cutting steel). This standard also provides graphical analysis methods for determining nonmetallic inclusions (see annex D).
GB/T 10561-2005 is referred in:
* GB 5310-2008 Seamless Steel Tubes and Pipes for High Pressure Boiler
* GB/T 3078-2008 Quality structural steel cold drawn bars
* GB/T 8731-2008 Free-cutting structural steel
* TB/T 2344-2003 Technical specifications for the procurement of 43 kg/m~75kg/m as rolled rails
* GB/T 29718-2013 Rolling bearings—Wind power generators main bearings
* GB/T 29717-2013 Rolling bearings—Wind power generators yaw and pitch bearings
* GB/T 5216-2014 Structural steels with specified hardenability bands
* GB/T 1222-2007 Spring steels
* GB/T 1221-2007 Heat-resistant steel bars
* NB/T 47009-2010(JB/T 4727) Low-alloy steel forgings for low temperature pressure equipments
* NB/T 47009-2010(JB/T4727) Low-alloy steel forgings for low temperature pressure equipments
* NB/T 47008~NB/T 47010-2010 Carbon and Low-alloy Steel Forgings for Pressure Equipment [Bound Volume]
* SH/T 3075-2009 of material selections for steel pressure vessels in petrochemical industry
* GB/T 1220-2007 Stainless steel bars
* EJ/T 1022.5-1996 PWR nuclear power plant valve - Part 5: Technical conditions for austenitic stainless steel forgings
* NB/T 20010.5-2010 PWR Nuclear Power Plant Valve - Part 5: Specification of Austenitic Atainless Steel Forging
* GB/T 9943-2008 High-speed tool steels
* GB 6479-2013 Seamless steel tubes for high-pressure chemical fertilizer equipments
* JB/T 7025-2004 Specification for rotor and shaft forgings for steam turbine (25MW and lower)
* GB/T 6478-2015 Steels for cold heading and cold extruding
* TB/T 2344-2012 Technical Specifications for the Procurement of 43 kg/m~75kg/m as Rolled Rails
* GB/T 699-2015 Quality carbon structural steels
* GB/T 3077-2015 Alloy structure steels
* GB/T 16508.2-2013 Shell Boilers - Part 2: Material
* TB/T 2235-2010 Rolling Bearing in the Railway Passenger Car and Wagon
* GB/T 14383-2008 Forged Fittings, Socket-welding and Threaded
* GB/T 1299-2014 Tool and mould steels
* GB/T 5216-2004 Structural steels subject to end-quench hardenability requirments
*GB/T 4171-2008 Atmospheric corrosion resisting structural steel
*GB/T 4171-2000 Superior atmospheric corrosion resisting structural steel
*TB/T 1979-2014 Atmospheric corrosion resisting steel for railway rolling stock
*JB/T 5000.8-2007 Heavy Mechanical General Techniques and Standards - Part 8: Forging
*Q/SY GJX 106-2009 Technical Specification of Fittings with DN400 and Larger for Oil and Gas Pipeline Project
*Q/SY GJX 105-2009 Technical Specification of Fittings with DN350 and Smaller for Oil and Gas Pipeline Project
*GB 2585-2007 Hot-rolled steel rails for railway
*GB/T 18254-2016 High-carbon chromium bearing steel
*NB/T 47008-2010(JB/T Carbon and alloy steel forgings for pressure equipments
*NB/T 47010-2010(JB/T Stainless and heat-resisting steel forgings for pressure equipments
*NB/T 47010-2010(JB4278) Stainless and heat-resisting steel forgings for pressure equipments
*NB/T 47008-2017 Carbon and alloy steel forgings for pressure equipment
*GB/T 13401-2017 Steel buttwelding pipe fittings—Technical specification
*NB/T 47009-2017 Low-alloy steel forgings for low temperature pressure equipments
*NB/T 47010-2017 Stainless and heat-resisting steel forgings for pressure equipments
*GB/T 3098.22-2009 Mechanical properties of fasteners made of the fine grain non-heat treatment steel—Bolts,screws and studs
*GB/T 35840.1-2018 Steels for plastic mould―Part 1:Non-alloy steels
*TB/T 2817-2018 Wrought steel solid wheel for railway car
*GB/T 34484.1-2017 Heat-treatable steels - Part 1: Non-alloy steels
*JB/T 1265-2014 Rotor and shaft forgings for 25MW to 200MW steam turbines-Technical specification
*GB/T 1234-2012 High resistance alloys for electrical heating
*GB/T 3078-2019 Quality structural steel cold drawn bars
*GB/T 33954-2017 Hot-rolled wire rod for quenched and tempered spring steel wires
*GB/T 26075-2019 Steel bars for sucker rods
*GB/T 3093-2021 High-pressure seamless steel tubes for diesel engine
*GB/T 3089-2020 Seamlless ultra-thin wall stainless steel tubes
*GB/T 34484.2-2018 Heat-treatable steels—Part 2:Alloy steels for quenching and tempering
*GB/T 16508.2-2022 Shell boilers—Part 2:Materials
*GB/T 41857-2022 Sheet metal parts fabricated by fine blanking combined with extrusion process—General specification
Code of China
Standard
GB/T 10561-2005  Steel - Determination of Content of Nonmetallic Inclusions - Micrographic Method Using Standards Diagrams (English Version)
Standard No.GB/T 10561-2005
Statusvalid
LanguageEnglish
File FormatPDF
Word Count5000 words
Price(USD)70.0
Implemented on2005-10-1
Deliveryvia email in 1 business day
Detail of GB/T 10561-2005
Standard No.
GB/T 10561-2005
English Name
Steel - Determination of Content of Nonmetallic Inclusions - Micrographic Method Using Standards Diagrams
Chinese Name
钢中非金属夹杂物含量的测定 标准评级图显微检验法
Chinese Classification
H24
Professional Classification
GB
ICS Classification
Issued by
AQSIQ, SAC
Issued on
2005-05-13
Implemented on
2005-10-1
Status
valid
Superseded by
Superseded on
Abolished on
Superseding
GB/T 10561-1989 Steel-Determination of content of non-metallic inclusion-Micrographic method using standard diagrams
Language
English
File Format
PDF
Word Count
5000 words
Price(USD)
70.0
Keywords
GB/T 10561-2005, GB 10561-2005, GBT 10561-2005, GB/T10561-2005, GB/T 10561, GB/T10561, GB10561-2005, GB 10561, GB10561, GBT10561-2005, GBT 10561, GBT10561
Introduction of GB/T 10561-2005
This standard specifies micro evaluation methods for evaluating non-metallic inclusions of rolled or forged steel products whose compression ratio is larger than or equal to 3 with standard diagrams. The method is comprehensively used for evaluation of the flexibility of purpose steel. However, owing to the impact of testing personnel, the test results are difficult to reappear even if adopting lots of samples. Therefore, great discretion is required while using this method. Note: these standard diagrams mayn't be applicable to evaluate certain types of steels (like free-cutting steel). This standard also provides graphical analysis methods for determining nonmetallic inclusions (see annex D).
Contents of GB/T 10561-2005
About Us   |    Contact Us   |    Terms of Service   |    Privacy   |    Cancellation & Refund Policy   |    Payment
Tel: +86-10-8572 5655 | Fax: +86-10-8581 9515 | Email: coc@codeofchina.com | QQ: 672269886
Copyright: Foryou Tech Co., Ltd. 2008-2040
 
 
Keywords:
GB/T 10561-2005, GB 10561-2005, GBT 10561-2005, GB/T10561-2005, GB/T 10561, GB/T10561, GB10561-2005, GB 10561, GB10561, GBT10561-2005, GBT 10561, GBT10561