Detail of GB/T 43814-2024

Introduction of GB/T 43814-2024

General technical requirements for intelligent furniture 1 Scope This document specifies the requirements, inspection rules, marking, instructions for use, packaging, storage and transportation of intelligent furniture products, and describes the corresponding test methods. This standard is applicable to the control of indoor intelligent furniture products. 2 Normative references The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 2423.55-2023 Environmental testing - Part 2:Test methods - Test Eh: Hammer tests GB/T 2828.1-2012 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection GB/T 3324 General technical requirements for wooden furniture GB/T 3325 Metal furniture - General technical requirements GB/T 3785.1-2023 Electroacoustics - Sound level meters - Part 1: Specifications GB 4343.1 Electromagnetic compatibility requirements for household appliances, electric tools and similar apparatus - Part 1: Emission GB/T 4343.2 Electromagnetic compatibility requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity GB 4706.1 (All parts) Safety of household and similar electrical appliances GB 4943.1 Audio/video, information and communication technology equipment - Part 1: Safety requirements GB/T 5296.6 Instructions for use of products of consumer interest - Part 6: Furniture GB 7000.1 (All parts) Luminaires GB/T 9254.1 Information technology equipment, multimedia equipment and receivers - Electromagnetic compatibility - Part 1: Emission requirements GB/T 9254.2 Information technology equipment, multimedia equipment and receivers - Electromagnetic compatibility - Part 2: Immunity requirements GB/T 14531 Office furniture - Tables, chairs and stools for reading GB/T 14532 Office furniture - Wooden cabinets and shelves GB 17625.1 Electromagnetic compatibility - Limits - Part 1: Limits for harmonic current emissions (equipment input current ≤16A per phase) GB/T 17625.2 Electromagnetic compatibility (EMC) - Limits - Limitation of voltage changes,voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16A per phase and not subject to conditional connection GB/T 17743 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment GB/Z 18029.11-2021 Wheelchairs - Part 11: Test dummies GB 18584 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture GB/T 18595 Equipment for general lighting purposes - EMC immunity requirements GB/T 22793 Test method for safety performance of children's high chairs GB 22793.1 Furniture - Children's high chair - Part 1: Safety requirements GB/T 24430 Test method for bunk bed structure safety GB 24430.1 Bunk beds for domestic use - Safety - Part 1: Requirements GB 24820 General technical requirements for laboratory furniture GB/T 24821 Dining tables and chairs GB 24977 Bathroom furniture GB/T 26706 Upholstered furniture - Palm fiber elastic mattress GB 28007 General technical requirements for children's furniture GB 28008 Safety requirements of glass furniture GB/T 28010 Hongmu furniture - General technical requirements GB/T 30117.2 Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety GB/T 30117.3 Photobiological safety of lamps and lamp systems - Part 3: Guidelines for the safe use of intense pulsed light source equipment on humans GB/T 30117.5 Photobiological safety of lamps and lamp systems - Part 5: Image projectors GB/T 32444 General technical requirements for bamboo furniture GB/T 32446 General technical requirements for glass furniture GB/T 32487 General technical requirements for plastic furniture GB/T 33135-2016 Information technology - Finger vein recognition system - General specifications for finger vein capture device GB/T 33282 General technical requirements for indoor stone furniture GB/T 35783-2017 Information technology - General specification for iris recognition devices GB/T 36464.2 Information technology - Intelligent speech interaction system - Part 2: Intelligent home appliances GB/T 37036.3 Information technology - Biometrics used with mobile devices - Part 3: Face GB/T 37733.1 Sensor networks - Remote personal health status monitoring - Part 1: General technical requirements GB/T 37733.2 Sensor network - Remote personal health status monitoring - Part 2: Interface technical requirements between terminals and platform GB/T 37733.3-2020 Sensor networks - Remote personal health status monitoring - Part 3: Terminals technical requirements GB/T 37742-2019 Information technology - Biometric - General specification for fingerprint recognition devices GB/T 38665.1 Information technology - Gesture interaction system - Part 1: General technical requirements GB/T 41387 Information security technology - Smart home general security specification QB/T 1097 Steel filing cabinet QB/T 1952.1-2023 Upholstered furniture - Sofa QB/T 1952.2 Upholstered furniture - Spring mattress QB/T 2280 Office furniture - Office chair QB/T 2384 Wooden writing desk QB/T 2385 Valuable hardwood furniture in deep color QB 2453.1 Children's cots and folding cots for domestic use - Part 1: Safety requirements QB/T 2453.2 Children's cots and folding cots for domestic use - Part 2: Test methods QB/T 2530 Wooden cabinet QB/T 2531 Kitchen furniture QB/T 2602 Public seat for theatre QB/T 2603 Wooden furniture for hotel QB/T 2741 Multi-functional furniture of student's apartment QB/T 4071 Desks and chairs QB/T 4156 Office furniture - Microcomputer desk QB/T 4190 Upholstered furniture - Upholstered furniture bed QB/T 4670 Bar chair QB/T 4839 Upholstered furniture - Foam mattress QB/T 5588 Shoe cabinet QB/T 5589 Laboratory furniture - Fume hood QB/T 5590 Infant mattress QB/T 5617 General technical requirements for beds IEC 60417 Graphical symbols for use on equipment IEC 62471:2006 Photobiological safety of lamps and lamp systems 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 intelligent furniture furniture that has functions such as voice interaction, body interaction, data collection and monitoring, data transmission and storage, processing and adjustment based on perception data, remote control, etc., and realizes transformation of such functions through human-machine or information interaction 3.2 operation device device in intelligent furniture that realizes the movement, functional regulation or transformation of furniture or components through an electromechanical system (or other system) 3.3 access area part where users at the functional position of the product can access under normal use of product 3.4 sensor module functional device or unit composed of sensitive elements and transduction elements, which can sense external environment or detect external actions, and can convert perceived non-electrical quantities into electric parameters and output them 4 Requirements 4.1 Basic performance 4.1.1 The quality of intelligent furniture products shall meet the requirements of the corresponding standards in Table A.1, Annex A. 4.1.2 After test according to product standards, the circuits and components of the product shall be free from damage, and all functions of the product shall be normal. 4.1.3 Intelligent furniture with operation devices shall meet the requirements of 4.1.2 after 5,000 regulations and operations. 4.1.4 After the mechanical strength test, the electronic component housing shall meet the requirements of the relevant standards in Annex B. 4.1.5 Intelligent functions shall be identified in the instruction for use. 4.1.6 For furniture products containing software and hardware, the software and hardware shall be safe and reliable, the hardware shall have strong anti-interference ability, and the software shall be provided with a permission security system.

Contents of GB/T 43814-2024

Contents 1 Scope 2 Normative references 3 Terms and definitions 4 Requirements 5 Test methods 6 Inspection rules 7 Marking, instructions for use, packaging, storage and transportation Annex A (Normative) Standards for various furniture products Annex B (Normative) Standards for electrical safety and electromagnetic compatibility Annex C (Normative) Durability test methods for operation devices