This Standard "Nondestructive Testing of Pressure Equipments" (NB/T 47013) comprises the following 13 parts:
- Part 1: General Requirements;
- Part 2: Radiographic Testing;
- Part 3: Ultrasonic Testing;
- Part 4: Magnetic Particle Testing;
- Part 5: Penetrant Testing;
- Part 6: Eddy Current Testing;
- Part 7: Visual Testing;
- Part 8: Leak Testing;
- Part 9: Acoustic Emission Testing;
- Part 10: Ultrasonic Time of Flight Diffraction Technique;
- Part 11: Standard Particles for X-ray Digital Radiography;
- Part 12: Magnetic Flux Leakage Testing;
- Part 13: Pulsed Eddy Current Testing.
This Part is Part 5 of NB/T 47013: Penetrant Testing.
... ...
... ...
1 Scope
This Part in NB/T 47013 specifies the liquid penetrant testing methods and quality grading of pressure equipments.
This Part is applicable to the testing of surface breaking flaws of pressure equipments with non-porous metal material caused during manufacture, installation and using.
2 Normative References
The following documents for the application of this document are essential. Any dated reference, just dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.
GB 11533 Standard for Logarithmic Visual Acuity Charts
GB/T 12604.3 Non-destructive Testing - Terminology-Terms Used in Penetrant Testing
JB/T 6064 Non-destructive Testing - Blocks for Penetrant Testing
JB/T 7523 Non-destructive Testing - Materials for Penetrant Testing
NB/T 47013.1 Nondestructive Testing of Pressure Equipments - Part 1: General Requirements
3 Terminologies and Definitions
For purpose of this Part, the terminologies and definitions defined in GB/T 12604.3 and NB/T 47013.1 as well as the followings apply.
3.1 Relevant indication
The mark indication formed by the penetrant oozed from the flaw, which is also called flaw indication generally.
3.2 Non-relevant indication
The indication formed by external factors irrelevant to the flaw.
3.3 False indications
The penetrant indication caused by penetrant contamination, testing environment, etc..
3.4 Assessment
The process to analyze the observed penetration-related indication and determine the cause of generating such indication and its classification.
Foreword I
1 Scope
2 Normative References
3 Terminologies and Definitions
4 General Requirements
5 Basic Procedure of Penetrant Testing
6 Operating Methods of Penetrant Testing
7 Penetrant Testing for the Pressure Equipments In-service
8 Testing Result Assessment and Quality Grading
9 Testing Record and Report
Appendix A (Normative) Schematic Diagram for the Process Procedures of Fluorescent and Dye Penetrant Testing
Appendix B (Normative) Testing Method Used for Non-standard Temperature
NB/T 47013.5-2015, NB 47013.5-2015, NBT 47013.5-2015, NB/T47013.5-2015, NB/T 47013.5, NB/T47013.5, NB47013.5-2015, NB 47013.5, NB47013.5, NBT47013.5-2015, NBT 47013.5, NBT47013.5
Introduction of NB/T 47013.5-2015
This Standard "Nondestructive Testing of Pressure Equipments" (NB/T 47013) comprises the following 13 parts:
- Part 1: General Requirements;
- Part 2: Radiographic Testing;
- Part 3: Ultrasonic Testing;
- Part 4: Magnetic Particle Testing;
- Part 5: Penetrant Testing;
- Part 6: Eddy Current Testing;
- Part 7: Visual Testing;
- Part 8: Leak Testing;
- Part 9: Acoustic Emission Testing;
- Part 10: Ultrasonic Time of Flight Diffraction Technique;
- Part 11: Standard Particles for X-ray Digital Radiography;
- Part 12: Magnetic Flux Leakage Testing;
- Part 13: Pulsed Eddy Current Testing.
This Part is Part 5 of NB/T 47013: Penetrant Testing.
... ...
... ...
1 Scope
This Part in NB/T 47013 specifies the liquid penetrant testing methods and quality grading of pressure equipments.
This Part is applicable to the testing of surface breaking flaws of pressure equipments with non-porous metal material caused during manufacture, installation and using.
2 Normative References
The following documents for the application of this document are essential. Any dated reference, just dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.
GB 11533 Standard for Logarithmic Visual Acuity Charts
GB/T 12604.3 Non-destructive Testing - Terminology-Terms Used in Penetrant Testing
JB/T 6064 Non-destructive Testing - Blocks for Penetrant Testing
JB/T 7523 Non-destructive Testing - Materials for Penetrant Testing
NB/T 47013.1 Nondestructive Testing of Pressure Equipments - Part 1: General Requirements
3 Terminologies and Definitions
For purpose of this Part, the terminologies and definitions defined in GB/T 12604.3 and NB/T 47013.1 as well as the followings apply.
3.1 Relevant indication
The mark indication formed by the penetrant oozed from the flaw, which is also called flaw indication generally.
3.2 Non-relevant indication
The indication formed by external factors irrelevant to the flaw.
3.3 False indications
The penetrant indication caused by penetrant contamination, testing environment, etc..
3.4 Assessment
The process to analyze the observed penetration-related indication and determine the cause of generating such indication and its classification.
Contents of NB/T 47013.5-2015
Foreword I
1 Scope
2 Normative References
3 Terminologies and Definitions
4 General Requirements
5 Basic Procedure of Penetrant Testing
6 Operating Methods of Penetrant Testing
7 Penetrant Testing for the Pressure Equipments In-service
8 Testing Result Assessment and Quality Grading
9 Testing Record and Report
Appendix A (Normative) Schematic Diagram for the Process Procedures of Fluorescent and Dye Penetrant Testing
Appendix B (Normative) Testing Method Used for Non-standard Temperature
