Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard replaces FZ/T 81006-2007 Jeanswear; the following technical changes have been made with respect to FZ/T 81006-2007 (the previous edition):
——The application scope of the standard is modified (see Chapter 1; Chapter 1 of 2007 Edition);
——The "Normative References" is supplemented and modified (see Chapter 2; Chapter 2 of Edition 2007);
——The terms of unwashed jeanswear and washed jeanswear in English are modified; the terms and definitions of general jeanswear and color jeanswear are canceled (see Chapter 3; Chapter 3 of Edition 2007);
——The requirements of instruction are supplemented (see 4.1; 4.1 of Edition 2007);
——The requirements of raw material are modified: the requirements of shell fabric and lining fabric are modified; the requirements of "decorative lace" and "drawstrings, cords and elastic cords" of auxiliary materials are added; the requirements of button, decorative button, zipper and other accessories are modified (see 4.3, 4.3of Edition 2007);
——The requirements on wrap and weft yarn directions are modified (see 4.4; 4.4 of Edition 2007);
——The requirements of splicing are canceled (4.5 of Edition 2007);
——The provisions and requirements of appearance defects as well as the expression of table note are modified (see 4.6; 4.7 of Edition 2007);
——The requirements of sewing are modified: the specifications of thick thread and thin thread are specified; the requirements of sewing button are canceled; the requirements of trademark and permanent label are modified (see 4.7; 4.8 of Edition 2007);
——The requirements of specification and dimension permissible deviation are modified; sleeve length check is carried out according to long sleeve length and short sleeve length respectively, and the expression of table note is modified (see 4.8; 4.9 of Edition 2007);
——The requirements of symmetric parts in ironing appearance are modified (see 4.10; 4.11 of Edition 2007);
——The requirements for physical and chemical performances are modified: the provision "jeanswear for children aged from 36-month to 14-year old shall also meet those specified in GB 31701" is supplemented; the assessment index of color fastness to light is modified; the assessment requirements regarding to products for infants and young children of color fastness are canceled; the assessment index of breaking strength is modified; the assessment index of wear resistance permissible degree of finished product shell fabric is modified; the assessment index of seam slippage at main parts of the finished product is modified; the assessment requirements on peeling strength of fusible interlining are canceled; the assessment requirements on adhesion fastness of jeans button are added; the assessment requirements on appearance after washing are added; the requirements on basic safety performance of finished product are modified (see 4.11; 4.12 of Edition 2007);
——The measurement method of appearance determination is modified: the measurement methods of specification, dimension and yarn skewness degree are modified (see 5.3; 5.3 of Edition 2007);
——Physical and chemical performances test is supplemented: the cage-rotating drying temperature for dimensional change after washing is supplemented; the sampling position for abrasion resistance is supplemented; the provision and testing method of sampling position for seam slippage are modified; the measurement method for adhesion fastness of jeans button is added; the measurement method for peeling strength of fusible interlining is canceled, the measurement method for appearance after washing is added; the provision "other items of physical and chemical performances shall be tested according to those specified in GB/T 21294" (see 5.4; 5.4 of Edition 2007);
——The inspection rules are modified (see Chapter 6; Chapter 6 of Edition 2007);
——The provisions in Annex A are modified (see Annex A; Annex A of Edition 2007);
——The provisions of Annex B are modified (see Annex B; Annex B of Edition 2007);
——The Annexes C and D in previous edition are canceled (see Annexes C and D of Edition 2007);
——Annex C is added (see Annex C).
This standard was proposed by China National Textile and Apparel Council.
This standard is under the jurisdiction of SAC/TC 219 National Technical Committee on Garments of Standardization Administration of China.
The previous editions of the standard are as follows:
——FZ/T 81006-1992 and FZ/T 81006-2007.
Jeanswear
1 Scope
This standard specifies terms and definitions, requirements, inspection method, inspection rules as well as marking, packaging, transport and storage of jeanswear.
This standard is applicable to jeanswear produced mainly with machine woven jean whose main material is pure cotton or cotton fiber.
This standard is not applicable to garments for infants at an age of 36 or less months.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 250 Textiles - Tests for Colour Fastness - Grey Scale for Assessing Change in Colour
GB/T 1335 (All parts) Standard Sizing Systems for Garments
GB/T 3917.1 Textiles - Tear Properties of Fabrics - Part 1: Determination of Tear Force Using Ballistic Pendulum Method (Elmendorf)
GB/T 3921-2008 Textiles - Tests for Colour Fastness - Colour Fastness to Washing with Soap or Soap and Soda
GB/T 3923.2 Textiles - Tensile Properties of Fabrics - Part 2: Determination of Maximum Force Using the Grab Method
GB 5296.4 Instructions for Use of Products of Consumer Interest - Part 4: Textiles and Apparel
GB/T 6529 Textiles - Standard Atmospheres for Conditioning and Testing
GB/T 8427-2008 Textiles - Tests for Color Fastness - Color Fastness to Artificial Light: Xenon Arc Fading Lamp Test
GB/T 8629-2001 Textiles - Domestic Washing and Drying Procedures for Textile Testing
GB/T 8630 Textiles - Determination of Dimensional Change in Washing and Drying
GB/T 14801 Test Method for Skewness and Bow in Woven and Knitted Fabrics
GB/T 15557 Standard Terminology Relating to Apparel
GB 18401 National General Safety Technical Code for Textile Products
GB/T 21196.2 Textiles - Determination of the Abrasion Resistance of Fabrics by the Martindale Method - Part 2: Determination of Specimen Breakdown
GB/T 21294 Testing Methods of Physical and Chemical Performance of Garments
GB/T 29862 Textiles - Identification of Fiber Content
GB 31701 Safety Technical Code for Infants and Children Textile Products
GB/T 31907 Method of Garment Measurement
FZ/T 80002 Marking, Packaging, Transportation and Storage for Garments
FZ/T 80004 Rule for Garments Delivery Inspection
3 Terms and Definitions
For the purposes of this document, the terms and definitions given in GB/T 15557 and the following apply.
3.1
unwashed jeanswear
jeanswear with the finished product or applied shell fabric only subjected to desizing and shrink resistant finish while not subjected to washing process and finish
3.2
washed jeanswear
jeanswear with the finished product or applied shell fabric subjected to such wash modes as stonewash, enzyme wash, bleach, etc. or various combinations of the wash modes
4 Requirements
4.1 Instruction
The instruction shall comply with those specified in GB 5296.4 and GB 31701, with unwashed jeanswear or washed jeanswear indicated; the requirements on special wear process, grinding process, etc. shall be noted in the instruction.
4.2 Standard sizing systems and specifications
4.2.1 The standard sizing system shall be set according to those specified in GB/T 1335.
4.2.2 The specification of main parts shall be designed according to the relevant requirements of GB/T 1335.
4.3 Raw materials
4.3.1 Shell fabric
Select shell fabric meeting the quality requirements of this standard according to the standards relevant to textile fabric of the nation.
4.3.2 Lining fabric
Lining fabric suitable for the applied shell fabric and conforming to the quality requirements of this standard shall be adopted.
4.3.3 Auxiliary materials
4.3.3.1 Lapping cloth, shoulder pad, border lace and bagging
The lapping cloth, shoulder pad, border lace and bagging suitable to the performance of the applied shell fabric and lining fabric shall be adopted, and their quality shall be in accordance with those specified in this standard.
4.3.3.2 Suture, drawstrings and elastic cord
Suture, drawstrings and elastic cord suitable to the performance of applied shell fabric, lining fabric and auxiliary materials shall be adopted (expect ornamental thread and tape).
4.3.3.3 Button, zipper and other attached accessories
Buttons (except ornamental buttons), zippers and other accessories suitable for the applied shell fabric shall be adopted. The button, ornamental button, zipper and other accessories shall be smooth in surface and free from burr, damage, defect or accessible sharp tip or edge. Zippers shall well mesh and run smoothly.
Note: accessible sharp tip or edge refers to the sharp tip and edge on finished product that may hurt human skin under normal wearing. Children's clothing shall also meet the relevant requirements of GB 31701.
Foreword i 1 Scope 2 Normative References 3 Terms and Definitions 4 Requirements 5 Inspection (Testing) Method 6 Inspection Rules 7 Marking, Packaging, Transport and Storage Annex A (Normative) Description for Appearance Defects and Severity Annex B (Normative) Test Methods for Distortion and Distortion Displacement of Jeans (Skirt) Annex C (Normative) Test Method for Adhesion Fastness of Jeans Button
Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard replaces FZ/T 81006-2007 Jeanswear; the following technical changes have been made with respect to FZ/T 81006-2007 (the previous edition):
——The application scope of the standard is modified (see Chapter 1; Chapter 1 of 2007 Edition);
——The "Normative References" is supplemented and modified (see Chapter 2; Chapter 2 of Edition 2007);
——The terms of unwashed jeanswear and washed jeanswear in English are modified; the terms and definitions of general jeanswear and color jeanswear are canceled (see Chapter 3; Chapter 3 of Edition 2007);
——The requirements of instruction are supplemented (see 4.1; 4.1 of Edition 2007);
——The requirements of raw material are modified: the requirements of shell fabric and lining fabric are modified; the requirements of "decorative lace" and "drawstrings, cords and elastic cords" of auxiliary materials are added; the requirements of button, decorative button, zipper and other accessories are modified (see 4.3, 4.3of Edition 2007);
——The requirements on wrap and weft yarn directions are modified (see 4.4; 4.4 of Edition 2007);
——The requirements of splicing are canceled (4.5 of Edition 2007);
——The provisions and requirements of appearance defects as well as the expression of table note are modified (see 4.6; 4.7 of Edition 2007);
——The requirements of sewing are modified: the specifications of thick thread and thin thread are specified; the requirements of sewing button are canceled; the requirements of trademark and permanent label are modified (see 4.7; 4.8 of Edition 2007);
——The requirements of specification and dimension permissible deviation are modified; sleeve length check is carried out according to long sleeve length and short sleeve length respectively, and the expression of table note is modified (see 4.8; 4.9 of Edition 2007);
——The requirements of symmetric parts in ironing appearance are modified (see 4.10; 4.11 of Edition 2007);
——The requirements for physical and chemical performances are modified: the provision "jeanswear for children aged from 36-month to 14-year old shall also meet those specified in GB 31701" is supplemented; the assessment index of color fastness to light is modified; the assessment requirements regarding to products for infants and young children of color fastness are canceled; the assessment index of breaking strength is modified; the assessment index of wear resistance permissible degree of finished product shell fabric is modified; the assessment index of seam slippage at main parts of the finished product is modified; the assessment requirements on peeling strength of fusible interlining are canceled; the assessment requirements on adhesion fastness of jeans button are added; the assessment requirements on appearance after washing are added; the requirements on basic safety performance of finished product are modified (see 4.11; 4.12 of Edition 2007);
——The measurement method of appearance determination is modified: the measurement methods of specification, dimension and yarn skewness degree are modified (see 5.3; 5.3 of Edition 2007);
——Physical and chemical performances test is supplemented: the cage-rotating drying temperature for dimensional change after washing is supplemented; the sampling position for abrasion resistance is supplemented; the provision and testing method of sampling position for seam slippage are modified; the measurement method for adhesion fastness of jeans button is added; the measurement method for peeling strength of fusible interlining is canceled, the measurement method for appearance after washing is added; the provision "other items of physical and chemical performances shall be tested according to those specified in GB/T 21294" (see 5.4; 5.4 of Edition 2007);
——The inspection rules are modified (see Chapter 6; Chapter 6 of Edition 2007);
——The provisions in Annex A are modified (see Annex A; Annex A of Edition 2007);
——The provisions of Annex B are modified (see Annex B; Annex B of Edition 2007);
——The Annexes C and D in previous edition are canceled (see Annexes C and D of Edition 2007);
——Annex C is added (see Annex C).
This standard was proposed by China National Textile and Apparel Council.
This standard is under the jurisdiction of SAC/TC 219 National Technical Committee on Garments of Standardization Administration of China.
The previous editions of the standard are as follows:
——FZ/T 81006-1992 and FZ/T 81006-2007.
Jeanswear
1 Scope
This standard specifies terms and definitions, requirements, inspection method, inspection rules as well as marking, packaging, transport and storage of jeanswear.
This standard is applicable to jeanswear produced mainly with machine woven jean whose main material is pure cotton or cotton fiber.
This standard is not applicable to garments for infants at an age of 36 or less months.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 250 Textiles - Tests for Colour Fastness - Grey Scale for Assessing Change in Colour
GB/T 1335 (All parts) Standard Sizing Systems for Garments
GB/T 3917.1 Textiles - Tear Properties of Fabrics - Part 1: Determination of Tear Force Using Ballistic Pendulum Method (Elmendorf)
GB/T 3921-2008 Textiles - Tests for Colour Fastness - Colour Fastness to Washing with Soap or Soap and Soda
GB/T 3923.2 Textiles - Tensile Properties of Fabrics - Part 2: Determination of Maximum Force Using the Grab Method
GB 5296.4 Instructions for Use of Products of Consumer Interest - Part 4: Textiles and Apparel
GB/T 6529 Textiles - Standard Atmospheres for Conditioning and Testing
GB/T 8427-2008 Textiles - Tests for Color Fastness - Color Fastness to Artificial Light: Xenon Arc Fading Lamp Test
GB/T 8629-2001 Textiles - Domestic Washing and Drying Procedures for Textile Testing
GB/T 8630 Textiles - Determination of Dimensional Change in Washing and Drying
GB/T 14801 Test Method for Skewness and Bow in Woven and Knitted Fabrics
GB/T 15557 Standard Terminology Relating to Apparel
GB 18401 National General Safety Technical Code for Textile Products
GB/T 21196.2 Textiles - Determination of the Abrasion Resistance of Fabrics by the Martindale Method - Part 2: Determination of Specimen Breakdown
GB/T 21294 Testing Methods of Physical and Chemical Performance of Garments
GB/T 29862 Textiles - Identification of Fiber Content
GB 31701 Safety Technical Code for Infants and Children Textile Products
GB/T 31907 Method of Garment Measurement
FZ/T 80002 Marking, Packaging, Transportation and Storage for Garments
FZ/T 80004 Rule for Garments Delivery Inspection
3 Terms and Definitions
For the purposes of this document, the terms and definitions given in GB/T 15557 and the following apply.
3.1
unwashed jeanswear
jeanswear with the finished product or applied shell fabric only subjected to desizing and shrink resistant finish while not subjected to washing process and finish
3.2
washed jeanswear
jeanswear with the finished product or applied shell fabric subjected to such wash modes as stonewash, enzyme wash, bleach, etc. or various combinations of the wash modes
4 Requirements
4.1 Instruction
The instruction shall comply with those specified in GB 5296.4 and GB 31701, with unwashed jeanswear or washed jeanswear indicated; the requirements on special wear process, grinding process, etc. shall be noted in the instruction.
4.2 Standard sizing systems and specifications
4.2.1 The standard sizing system shall be set according to those specified in GB/T 1335.
4.2.2 The specification of main parts shall be designed according to the relevant requirements of GB/T 1335.
4.3 Raw materials
4.3.1 Shell fabric
Select shell fabric meeting the quality requirements of this standard according to the standards relevant to textile fabric of the nation.
4.3.2 Lining fabric
Lining fabric suitable for the applied shell fabric and conforming to the quality requirements of this standard shall be adopted.
4.3.3 Auxiliary materials
4.3.3.1 Lapping cloth, shoulder pad, border lace and bagging
The lapping cloth, shoulder pad, border lace and bagging suitable to the performance of the applied shell fabric and lining fabric shall be adopted, and their quality shall be in accordance with those specified in this standard.
4.3.3.2 Suture, drawstrings and elastic cord
Suture, drawstrings and elastic cord suitable to the performance of applied shell fabric, lining fabric and auxiliary materials shall be adopted (expect ornamental thread and tape).
4.3.3.3 Button, zipper and other attached accessories
Buttons (except ornamental buttons), zippers and other accessories suitable for the applied shell fabric shall be adopted. The button, ornamental button, zipper and other accessories shall be smooth in surface and free from burr, damage, defect or accessible sharp tip or edge. Zippers shall well mesh and run smoothly.
Note: accessible sharp tip or edge refers to the sharp tip and edge on finished product that may hurt human skin under normal wearing. Children's clothing shall also meet the relevant requirements of GB 31701.
Contents of FZ/T 81006-2017
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Requirements
5 Inspection (Testing) Method
6 Inspection Rules
7 Marking, Packaging, Transport and Storage
Annex A (Normative) Description for Appearance Defects and Severity
Annex B (Normative) Test Methods for Distortion and Distortion Displacement of Jeans (Skirt)
Annex C (Normative) Test Method for Adhesion Fastness of Jeans Button
